Feit Electric UCL/REMOTE2 User manual

Model: UCL/REMOTE2
READ BEFORE INSTALLATION
SAVE THESE INSTRUCTIONS
Questions, problems, missing parts? Before returning to the store,
call Feit Electric Customer Service
8 a.m. - 5 p.m., PST, Monday - Friday
We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this Under Cabinet Remote. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Feit Electric.
1-866-326-BULB (2852)
FEIT.COM
IMPORTANT SAFETY INSTRUCTIONS
AND INSTALLATION GUIDE
UNDER CABINET HANDHELD REMOTE
ONE
LED LIGHT SYSTEM
YNC

Limited Warranty
Table of Contents
Safety Information SAVE THESE INSTRUCTIONS
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This
equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the equipment. Feit Electric Company, 4901 Gregg Road, Pico Rivera, CA 90660. www.feit.com, 1-800-543-3348.
IMPORTANT SAFEGUARDS:
ALWAYS FOLLOW BASIC SAFETY PRECAUTIONS WHEN USING ELECTRICAL
PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT.
This product is warranted to be free from defects in workmanship and materials for up to 1 year from date of purchase. If the product fails within the warranty period,
please contact Feit Electric at [email protected], visit feit.com/contact-us or call 1-866 326-BULB (2852) for instructions on replacement or refund. REPLACEMENT OR REFUND
IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY. LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces do not allow the exclusion of
incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state or province to province.
2 WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
CAUTION: Do not install this product in a wet location.
CAUTION: Do not install this product in an outdoor location.
CAUTION: Do not use chemical solvents or harsh abrasives
to clean the fixture.
Table of Contents ................................... 2
Safety Information .................................. 2
FCC Statement ...................................... 2
Warranty .......................................... 2
Pre-Assembly ...................................... 3
Screw Mount Installation ............................. 4
Operating Instructions ...............................5
Mounting Guide .....................................6

3
Pre-Assembly
AA BB
TOOLS REQUIRED
NOTE: Hardware not shown to actual size.
HARDWARE INCLUDED
Part Description Quantity
AA 1
1
2
Handheld Remote
BB Mounting Plate
Mounting Screw
Mounting Guide 1DD
3M Tape 2EE
CC
UCL12/5CCT
UCL24/5CCT
UCL36/5CCT
UCL12FP/5CCTCA
UCL18FP/5CCTCA
UCL24FP/5CCTCA
BPUCL/PUCK/5CCT/3
UCL192/FLEX/5CCT
WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
DD EECC
PHILLIPS
SCREW DRIVER
PENCILFLATHEAD
SCREW DRIVER
DEVICE COMPATIBILITY LIST (Max 100 paired units)
3M

Screw Mount Installation
4 WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
1
2
4
Find the desired location for the Mounting Plate (BB) and
mark clearly using the provided Mounting Guide (DD).
Position the Remote
Separate the Mounting Plate
Installing Mounting Plate
Snap the front of the Mounting Plate (BB) onto the
mounted backplate.
5Attach the remote to the Mounting Plate
Attach the Handheld Remote (AA) to the metal Mounting Plate (BB)
via the magnet on the back of the Handheld Remote (AA).
DD
BB
Carefully separate the Mounting Plate (BB) backplate.
3Installing Mounting Plate
Screw in the backplate of the Mounting Plate (BB)
using Mounting Screws (CC) on marked location.
AA
BB
BB CC
NOTE: The Mounting Plate can be installed
horizontally or vertically.
BB

1Remove one side of the adhesive backing paper on the 3M
Tape (EE) and place in the indents on the back of the
Mounting Plate (BB).
Install 3M Tape on Mounting Plate
3Attach the Handheld Remote (AA) to the metal Mounting
Plate (BB) via the magnet on the back of the Handheld
Remote (AA).
Attach the remote to the Mounting Plate
2Remove the adhesive backing paper on the 3M Tape (EE) and
place on wall on desired location.
Install the Mounting Plate
5WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Adhesive Mount Installation
EE
EE
BB
AA
BB

6 WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.
Operating Instructions
ON/OFF Button
DIM Button
CCT Button
NOTE: Once paired, to operate a fixture separately from the remote, hold the CCT button for 3 seconds
on the fixture that you want to control independantly. This fixture will not respond to the remote and can
only be operated individually through the buttons on the fixture. Press and hold the CCT button for 3
seconds on the fixture again to reconnect to the remote.
Changing the Color Temperature Setting
To select the desired color temperature, cycle through 2700K - 3000K - 3500K - 4000K - 5000K
by pressing the CCT Button. This setting will be fixed each time the ON/OFF switch is turned ON.
Changing the Dimming Levels
To select the desired dimming level, Cycle through Dimming levels (High, Medium, Low, Dim, Off) by pressing the
Dim Button. This setting will be fixed each time the ON/OFF switch is turned ON.
Pair or Unpair Fixtures to the Remote
To pair a fixture to the remote, power on the fixture and hold the Dim button on the remote for 3 seconds. Lights will blink once
the units are paired. This can be done with multiple fixtures at once.
Initial Remote Recognition
The first time pairing fixtures to the remote requires that the fixtures recognize the specific remote. Power on the fixture & hold
the ON/OFF button on the remote for 3 seconds. Lights will blink once the units have recognized the remote. This can be done
with multiple fixtures at once.
To unpair a fixture from the remote, power on the fixture and hold the ON/OFF button on the remote for 3 seconds. Lights will
blink once the units are unpaired. This can be done with multiple fixtures at once. When unpaired this way, LED fixtures will be
reset to the default mode of operating individually.

Cut here
CUT OUT TEMPLATE
Mounting Plate
4.5in.3.2in.
2.8in.
Mounting Template
7WWW.FEIT.COM
Please contact 1-866-326-BULB (2852) for further assistance.