Felicitysolar LPBF24200-M User manual

USER GUIDE
LiFePO4 Battery System for Households
Make life full of hope
LiFePO4 Battery System for Households
358-010202-01

1 ABOUT THIS MANUAL ..................................................................................... 1
1.1 Purpose ................................................................................................. 1
1.2 Scope .................................................................................................... 1
1.3 Safety Instructions .................................................................................. 1
2 INTRODUCTION .............................................................................................. 2
2.1 Features................................................................................................. 2
2.2 Product Overview ................................................................................... 2
2.3 Specifications ........................................................................................ 4
2.4 Recommended Settings .......................................................................... 4
3. INSTALLATION ............................................................................................... 5
3.1 Unpacking and Inspection ....................................................................... 5
3.2 Mounting the Unit ................................................................................... 5
3.3 Connection for Parallel Mode ................................................................... 7
4. OPERATION ................................................................................................... 10
4.1 Switch On/Off.......................................................................................... 10
4.2 Description for LED ................................................................................. 11
4.3 ON / OFF or SOC Led (Mode or SOC) ....................................................... 11
4.4 DIP switch SW1-SW4 Description ............................................................ 11
5. EMERGENCY SITUATIONS ............................................................................. 12
5.1 Fire ...................................................................................... ... . . ........... 12
5.2 Leaking Batteries .................................................................... . . .. . .. ....... 12
5.3 Wet Batteries ........................................................................................ 12
5.4 Warranty ............................................................................. . .. .............. 12
Contents

01 02
LiFePO4 Battery System for HouseholdsLiFePO4 Battery System for Households
2. INTRODUCTION
The battery system main using Solar power system for Family house. It also have a with to controller the
battery easily and protect our Household application timely.
• Iron phosphate-lithium power battery
• Long warranty period:5 years
• Higher energy density, smaller volumn for household.
• Support connected in parallel mode for expansion
• Photovoltaic system: This battery pack is designed for household photovoltaic systems.
• Battery management system (BMS): The battery packs built-in BMS monitors its
operation and prevents the battery from operating outside design limitations.
• Expandability: This battery pack can be easily expanded by adding expansion battery packs
in parallel connection.
2.2 Product Over View
2.1 Features
1. LED display 2. Power On/Charging indicator 3.Battery Negative -
4. Battery Positive + 5. Switch 6. Communication port
7.Earth wire 8. Wall mounted fixing
48V Front view
6
5
7
3
41
2
1.1 Purpose
This manual describes the introduction, installation, operation and emergency situations of the battery bank.
Please read this manual carefully before installations and operations. Keep this manual for future reference.
1.2 Scope
This manual provides safety and installation guidelines as well as information on tools and wiring.
1.3 Safety Instructions
WARNING: This chapter contains important safety and operating instructions. Read and keep this
manual for future reference.
1.Before using the unit, read all instructions and cautionary markings on the unit, the batteries and all
appropriate sections of this manual.
2. CAUTION – ,even burst. please use it following using manual. In case -- To reduce risk of injury,damage
of causing personal
3. Do not disassemble the battery. Take it to a qualified service center when service or repair is required.
Incorrect re-assembly may result in a risk of fire.
4. To reduce risk of electric shock, disconnect all wirings before attempting any maintenance or cleaning.
Turning off the unit will not reduce this risk.
5. CAUTION – Only qualified personnel can install this device with inverter.
6. For optimum operation of this battery, please follow required spec to select appropriate cable size.
7. Be very cautious when working with metal tools on or around batteries. A potential risk exists to drop a tool
to spark or short circuit batteries or other electrical parts and could cause an explosion or fire.
8. Please strictly follow installation procedure.
9. To support full output load, at least 2 sets of LPBF48V for inverter larger than 6KVA in parallel connection.
10. GROUNDING INSTRUCTIONS - This System should be connected to a permanent grounded wiring
system. Be sure to comply with local requirements.
11. NEVER cause AC output an d DC input short circuited. Do not connect to the mains when DC input
short circuits.
12. Warning!! Only qualified service persons are able to service this device.
13. Battery should be installed indoor and kept away from water, high temperature mechanical force and flames.
14. Do not install the battery in any environment of temperature below 0°C or over 55°C,and humidity over 80%.
15. Do not put any heavy objects on the battery.
1 ABOUT THIS MANUAL
Special Attention: Due to the built-in protection board of the lithium battery pack is with
over-discharge protection function, it is strongly recommended to stop using the load when
the battery pack is over-discharged. The battery pack cannot be repeatedly activated for
discharge. Or the battery may be failed to be activated by the AC or PV activation cable
( It requires a special charging activation method), so cannot be charged. Therefore, when
the battery pack is low power, please charge the battery as soon as possible when main
power or solar energy is available.
1. The batteries can be connected in parallel. Series connection is not allowed.
Use in upright position only.
2. The batteries are not allowed to connected with PWM controller for charging.
1.4 Can be connected in parallel
LPBF48200-P

LiFePO4 Battery System for Households LiFePO4 Battery System for Households
1. LED display 2. Power On/Charging indicator 3.Battery Negative -
4. Battery Positive + 5. Switch 6. Communication port
7.Earth wire 8. Wall mounted fixing
LPBF24200-M
2.4 Recommended Settings
Lithium battery pack is not same as lead-acid battery, so for the devices which you connect with the battery pack
for charging or discharging, such as inverters, MPPT charger controllers or UPS, please implement pre-settings
as recommended settings as below before you launched them.
Setting
Max. Charging Voltage
Floating charging Voltage
Max. Charging Current
Cut-off voltage
Notes: “N” means the number of battery packs connected in parallel.
LPBF48200-P
2.3 Specifications
Model
Usable Capacity
Nominal Voltage
Voltage Range
MAX. Charge & Discharge Current
Recommend Charge & Discharge Current
MAX. Output Power
Recommend Output Power
DOD
Modules Connection
Communication
Ingress Protection
Cycle Life
Working Temperature Range
Net Weight(KG)
Gross Weight(KG)
Product Dimension(MM)
Package Dimension(MM)
≥95%
1~6in parallel
CAN&RS485
IP21
≥6000@25°C , 80%DOD
Discharge:-20°C to +65°C, Charge:+0°C to +55°C
LPBF48200-P
10KWH
51.2
48-57.6
≤80A
6000W
4000W
120A@30S
855x 700x330MM
70.5KG
88KG
755x600x160MM
LPBF48200-MLPBF24200-M
807x597x298MM
685x475x213MM
73KG
78KG
03 04
10KWH
51.2
48-57.6
≤80A
6000W
4000W
120A@30S
5KWH
25.6
24-28.8
≤80A
3000W
2000W
120A@30S
537x537x298MM
450x415x213MM
38KG
41.5KG
LPBF48200-MLPBF24200-M
57.6V
57.6V
48V
80A*N
28.8 V
28.8 V
24V
3
6
7
4
85
1
2
LPBF48200-M
1
2
3
4
56
7
8

LiFePO4 Battery System for Households LiFePO4 Battery System for Households
0605
Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You
should have received the following items inside of package.
3.1 Unpacking and Inspection
3.2 Mounting the Unit
Consider the following points before selecting where to install:
• Do not mount the battery on flammable construction materials.
• The ambient temperature should be between 0°C and 45°C to ensure optimal operation.
• The recommended installation position is to be adhered to the wall vertically.
• Be sure to keep other objects and surfaces as shown in the right diagram to guarantee sufficient heat dissipation and
to have enough space for removing wires.
3. INSTALLATION
BA
C
DE
F
G
H I
G
H
I
LPBF48200 -P
140
320
159
401
357
401
198
180
240
NO NAME SPECIFICATION PICTURE
Communication line 1
Communication line 2
Used for Communication among batteries
Adapter
Screw Mounting screw
PV Wake up line
User manual User manual
Guarantee card Guarantee card
5
2
1
4
5
6
33
2
7
Grid activation communication wire
( used with 6)
Used for activating the pack when grid
power recover
6
8
Used for auto restart when PV comeback
in off-grid system
9
7
4
Communication line 3 Used for communication between battery
and host computer
9
1
Wall mount Wall mount bracket
10 Cables Used for battery parallel connection 10
8
G
H
I
LPBF24200 -M
87.5
240
108.5
234
185
234
76.5
137.5
140
BA
C
DE
F
G
HI
BA
C
DE
F
G
H I
G
H
I
LPBF48200 -M
117.5
208
301
388
301
180
167.5
140
240
Please follow below steps to implement battery connection:
1.Assemble battery ring terminal based on recommended battery cable and terminal size.
2.Connect all battery packs as units requires. It’s suggested to connect at least 2 sets of LPBF48V for
inverter larger than 7.5KVA in parallel connection.
Note: if you need the battery wake-up when the grid back, connect the battery with grid use
power adapter and communication line 1 shown in the package list.

08
LiFePO4 Battery System for Households
07
LiFePO4 Battery System for Households
Note: After completing the above 4 steps, arbitrarily select the positive and negative poles of one of the battery packs to output
(the upper battery pack or the lower battery pack, you can not select the positive and negative poles of the two battery packs
at the same time). After confirming the correct connection of the inverter, controller and battery, you can turn on any of the
switches and use the battery group happily.
Note: One group of LPBF48V can be stacked up to 2 layers, and up to 6 in parallel connection.
48V Front view
Step 3: The schematic diagram of the parallel connection of six battery packs is shown in Figure 3.
Schematic diagram of parallel connection of battery packs(LPBF48200-M&LPBF24200-M)
The eStrong LPBF series battery support to be connected in parallel for expansion. If you need one more
battery bank work in parallel mode, connect the battery as shown in PIC 2
3.3 Connection for Parallel Mode
Step 1: The batteries are placed
as shown in Figure 1
Step 2: The schematic diagram of the parallel
connection of two battery packs is shown in
Figure 2.
Schematic diagram of parallel connection of battery packs(LPBF48200-P)

LiFePO4 Battery System for Households LiFePO4 Battery System for Households
For pure off grid system ,the PV awake wire need to be connected with MPPT charge controller if the battery
pack is charged by solar panels only . The connection diagram as below :
4. OPERATION
Once the batteries are connected well, simply press On/Off button to enable the output of the battery pack.
1.Switch on: press On/Off button to switch on the battery, then the battery will do self-inspection before
enable output. The LED will show the SOC.
2.Switch off: press and hold On/Off button for 3 seconds, the battery will shut down directly.
Description for Communication port
4.1 Switch On / Off
Picture PIN Description
1
2
3
4
5
6
7
8
Trigger-GND
Trigger-VCC
NC
COMM-GND
RS485-B
RS485-A
CANL
CANH
The SOC of the battery is shown by the LED
4.2 Description for LED
DIP SWITCH
1-4
5
Communication Address
Termination Resister
Note: The battery need to be fully charged for at least once in one month to ensure the accurate SOC
calculation.
100% 75% 50% 25% Flashing SOC<10%
48V Front view
1009

11 12
LiFePO4 Battery System for Households LiFePO4 Battery System for Households
4.3 ON / OFF or SOC Led (Mode or SOC)
BATTERY
MODE ON/OFF SOC REMARK
GREEN
LED RED LED LED1 LED2 LED3 LED4
POWER
OFF OFF OFF OFF OFF OFF OFF
POWER
ON OFF ON ON ON ON ON
STANDBY OFF OFF SOC SOC<10%(DEFAULT ):
LED1 FLASH
NORMAL ON OFF RUNNING/SOC SOC<10%(DEFAULT ):
LED1 FLASH
DISCHARGE ON OFF SOC SOC<10%(DEFAULT ):
LED1 FLASH
CHARGE FLASH OFF RUNNING
LOW POWER FLASH OFF OFF
FAULT OFF ON
ON OFF OFF OFF BATTERY VOLTAGE HIGH
OFF ON OFF OFF BATTERY VOLTAGE LOW
ON ON OFF OFF CELL VOLTAGE HIGH
OFF OFF ON OFF CELL VOLTAGE LOW
ON OFF ON OFF CHARGING CURRENT HIGH
OFF ON ON OFF DISCHARGING CURRENT HIGH
ON ON ON OFF BMS TEMPERATURE HIGH
OFF OFF OFF ON BMS TEMPERATURE LOW
ON OFF OFF ON CELL TEMPERATURE HIGH
OFF ON OFF ON CELL TEMPERATURE LOW
ON ON OFF ON CURRENT SENSOR ABNOMAL
Sw1 SW2 SW3 SW4 Remarks
0 0 0 0 means ID=0,communication address is0x00/0x10③
1 0 0 0 means ID=1,communication address is0x01④
0 1 0 0 means ID=2,communication address is0x02
1 1 0 0 means ID=3,communication address is0x03
0 0 1 0 means ID=4,communication address is0x04
1 0 1 0 means ID=5,communication address is0x05
0 1 1 0 means ID=6,communication address is0x06
1 1 1 0 means ID=7,communication address is0x07
0 0 0 1 means ID=8,communication address is0x08
1 0 0 1 means ID=9,communication address is0x09
0 1 0 1 means ID=10,communication address is0x0A
1 1 0 1 means ID=11,communication address is0x0B
0 0 1 1 means ID=12,communication address is0x0C
1 0 1 1 means ID=13,communication address is0x0D
0 1 1 1 means ID=14,communication address is0x0E
1 1 1 1 means ID=15,communication address is0x0F
DIP switch SW5 Description②
SW5
1
0
Remarks
means disconnect
120Ω resistor
means connect
120Ω resistor
Remark①: 1 in SW1-SW5 indicates ON status, and 0 indicates OFF status.
Remark②: When multiple battery packs communicate, the last battery pack SW5 needs to be in the ON
status, otherwise the communication may have interference.
Remark③: When the battery pack ID is set to 0, it means stand-alone operation, and it is not necessary to
detect whether the parallel condition is satisfied ⑤
Remark④: When the battery pack ID is set to 1-15, it means that the parallel operation is required, and it is
necessary to detect whether the parallel condition is satisfied ⑤
Remark⑤: The parallel condition is that the difference between the battery voltage of the local battery and
all the battery pack voltages is <3V, otherwise wait until the condition is satisfied
DIP switch SW1-SW4 Description ①
4.4 DIP switch SW1-SW4 Description
5. EMERGENCY SITUATIONS
Felicity cannot guarantee eStrong battery absolute safety.
5.1 Fire
In case of fires, make sure that the following equipment is available near the system.
• SCBA (self-contained breathing apparatus) and protective gear in compliance with the Directive on Personal
Protective Equipment 89/686/EEC.
• NOVEC 1230, FM-200, or dioxide extinguisher
Batteries may explode when heated above 150°C. KEEP FAR AWAY from the battery if it catches fire.
If the battery pack leaks electrolyte, avoid contact with the leaking liquid or gas. If one is exposed the leaked
substance, immediately perform the cations described below.
• Inhalation: Evacuate the contaminated area, and seek medical attention.
• Contact with eyes: Rinse eyes with running water for 5 minutes, and seek medical attention.
• Contact with skin: Wash the affected area thoroughly with soap and water, and seek medical attention.
• Ingestion: Induce vomiting, and seek medical attention.
If the battery pack is wet or submerged in water, do not let people access it, and contact your supplier for help.
Damaged Batteries
Damaged batteries are not fit for use and are dangerous and must be handled with the utmost care. It may
leak electrolyte or produce flammable gas. If the battery pack seems to be damaged, pack it in its original
container, and then return it to your supplier.
Products that are operated strictly in accordance with the user manual are covered by the warranty. Any
violation of this manual may void the warranty.
Limitation of Liability
Any product damage or property loss caused by the following conditions, Felicity does not assume any direct
or indirect liability.
• Product modified, design changed or parts replaced.
• Changed, or attempted repairs and erasing of series number or seals;
• System design and installation are not in compliance with standards and regulations;
• The product has been improperly stored in end user’s premises;
• Transport damage (including painting scratch caused by movement inside packaging during shipping). A
claim should be made directly to shipping or insurance company.
5.2 Leaking Batteries
5.3 Wet Batteries
5.4 Warranty