Fender TOUR User manual

TRUE WIRELESS IN EAR MONITORS

QUICK START
In the box
Product overview
Pairing
Fit
Charging
Fender® TWS APP
DETAILS
Turning On/Off
Tap Controls – Music & Calls
Troubleshooting
Specifications
Care and maintenance
Safety
Waterproof
Warranty

IN THE BOX

PRODUCT OVERVIEW

PAIRING
To pair to a Bluetooth audio device
1，Start with the TWS inside the charging case with the lid
closed.
2，Open the charging case, press and hold the case button until
the LED on the charging case blinks blue and green，the TWS
LED blinks green.
3，On your Bluetooth audio device, go to Bluetooth settings and
select “Fender Tour L”. Once connected, the TWS LED will turn
off.

FIT
• Your Fender Tour TWS come factory fitted with S/M/L
three sized tips.
• Fit the TWS snugly within your ears so that they are
completely sealed.
• To achieve the most comfortable fit and sound for your
TWS, take time to test out the various tip sizes to find the
best fitting size. It is normal to use differently sized tips in
each ear.

CHARGING – TWS
·The Fender® Tour is capable of 5 hours of playback when
fully charged. The charging case gives you 4 additional
recharge cycles or 20 hours additional playback.*
·The TWS will start charging once they are placed into the
charging case and the lid closed. The charging case LED will
indicate the charging status:
 Charging: Solid red light on case.
 Fully charged: Solid green light on case.
·Quick-charge feature: A 15 minute charge will provide up to
1 hour of playback*. A full charge of the earbuds can take up
to 2 hours when charging from a discharged state.
*The specifications are acquired from laboratory tested data. The playback time,
tested under the laboratory condition of AAC format and 50% volume, may vary with
different device setting, environments, usage and other factors.

CHARGING - CASE
• Close the lid and attach the USB-C charging cable to the
charging case.
• The case LED will indicate the charging status:
• LED is solid red = Charging
• LED is solid green = Fully charged

• Fender® TWS APP
The Fender® TWS App lets you do the following:
• Customize the sound profile of your Tour TWS.
• Update your earbuds when new features and
improvements are available.

DETAILS – Turning ON / OFF
AUTO POWER ON/OFF
· Turn OFF - Placing your earbuds into the charging case will
automatically turn them off.
Turn ON - Opening the charging case will automatically turn
them on.
· The TWS will automatically power off after 15 minutes when
not in use.

DETAILS – Controls: Music & Calls

TROUBLESHOOTING
• Soft reset: If your TWS are not responding or connecting
intermittently, place them in the charging case, close the
lid for at least 5 seconds and plug the case into charge.
This will turn the TWS off and perform a soft reset.
• Factory reset: If that does not resolve the issue, we
recommend resetting the TWS to their original factory
settings. Before starting this process please “FORGET” or
“REMOVE” your Fender® Tour device from the Bluetooth
menu on all your connected audio devices.
• Place both TWS in the charging case and close the lid.
• Open the charging case, press & hold the case button until
the case LED starts blinking green (about 8-12 seconds)
• Release the button,close the case and wait for 5 seconds.
• The Tour has been reset and is ready to pair.

SPECIFICATIONS

CARE AND MAINTENANCE
• Clean TWS regularly of dirt and wax build up. To clean,
remove ear tips from TWS, then gently wipe away dust
and oil with a dry cloth. Check that there is no blockage in
the sound canal before reattaching ear tips.
• Check to make sure the TWS are dry before charging
them.

SAFETY
Warning
·Due to the noise isolating properties of these TWS, do not
use while driving, riding a bike or where vehicular traffic is
present, or in any other activity where failure to hear
surrounding sounds could be dangerous.
·Listening at high volume levels can lead to permanent
hearing damage. Always turn the volume down before use.
·Never disassemble the Fender Tour or replace the batteries.
There are no user-serviceable parts inside.
·Do not expose the Fender Tour to temperatures below 32℉
（0℃） or to temperatures above 113℉（45℃）.
·Do not use the Fender Tour in a thunderstorm storm. This
could prevent the product from working properly, and also
increase your chance of being electrically shocked.
·Do not expose batteries or battery packs to excessive heat
such as sunshine, fire or the like.
·Disposal of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an
explosion.
·Leaving battery in an extremely high temperature
surrounding environment or extremely low air pressure that
may result in an explosion or the leakage of flammable liquid
or gas.

WATERPROOF
· The Fender® Tour features an IPX4 waterproof rating. The
Tour TWS is designed to handle sweat, rain and general
forms of exercise.
· The Fender® Tour TWS are not designed for swimming,
showering or exposure to pool or ocean water.
· The charging case is not water resistant, so please ensure
your earbuds are completely dry before charging.

WEEE
The product bears the selective sorting symblo for Waste
electronic equipment(WEEE).This means that this product must
be handled pursuant to European directive 2014/53/EU in
order to be recycled or dismantled to minimize its impact on
the environment.
User has the choice to give his product to a competent recycling
organization or to the retailer when he buys a new electrical or
electronic equipment.
Electrical and electronic equipment,parts and batteries marked
with this symbol must not be disposed of with normal
household wastage,it must be collected and disposed of
separately to protect the environment.

CE
· Use the Fender Tour TWS is the enviroment with the
temperature between 0℃ and 45℃, otherw ise, it m ay b e
damaged.
· For Battery,risk of explosion battery is replaced by and
incorrect type,dispose of used batteries according to the
instructions.
· To prevent possible hearing damage do not listen at high
volume levels for long periods.

FCC
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions,may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged totry
to correct the interference by one or more of the following

measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
TELEC
You could find out the TELEC certificate information from the
charging case.