Fender 410 PRO User manual

1
BASSMAN® 410 PRO SL LOUDSPEAKER
(This is the model name for warranty claims)
Fender® Musical Instruments Corp. 8860 East Chaparral Road Suite 100 Scottsdale, AZ 85250
p/n 2217000000 (120V)
SERVICE MANUAL
CONTENTS:
Notices .............................. 2
Specifications.................... 3
Service Notes.................... 4
Parts Lists:
PCB Assembly............ 5
Input Assembly........... 5
Cabinet Assembly ...... 5
End Item Assembly .... 5
Service Diagrams.............. 6

2
BASSMAN® 410 PRO SL LOUDSPEAKER
(This is the model name for warranty claims)
June, 2002
IMPORTANT NOTICE
•Copyright © 2002 FMIC. All rights reserved. All
information contained herein is CONFIDENTIAL
and PROPRIETARY and is the property of
Fender® Musical Instruments Corporation. It is
not to be sold or assigned to another party and is
disclosed solely for use by Fender Authorized
Service Centers for purposes of product service
and maintenance. All information is not to be dis-
closed to others without the expressed permission
of Fender® Musical Instruments Corporation. All
specifications are subject to change without no-
tice. This information and any copies produced
electronically or otherwise must be surrendered
upon demand of Fender Musical Instruments Cor-
poration.
•Parts marked with two asterisks (**) indicate the
required use of that specific part. This is neces-
sary for RELIABILITY and SAFETY requirements.
DO NOT USE A SUBSTITUTE!
PARTS LIST CODES
The description codes used in the itemized Parts Lists are defined below:
CAPACITOR CODES
CAP AE = Aluminum Electrolytic
CAP CA = Ceramic Axial
CAP CD = Ceramic Disk
CAP MPF = Metalized Polyester Film
CAP MY = Mylar
CAP PFF = Polyester Film/Foil
RESISTOR CODES
RES CC = Carbon Comp
RES CF = Carbon Film
RES FP = Flame Proof
RES MF = Metal Film
RES WW = Wire Wound
HARDWARE CODES
BLX = Black Oxide
CR = Chrome Plated
HWH = Hex Washer Head
M = Machine Screw
NI = Nickel Plated
OHP = Oval Head Phillips
PB = Particle Board
PHP = Pan Head Phillips
PHPS = Pan Head Phillips Sems
SMA = Sheet Metal "A" Point
SMB = Sheet Metal "B" Point
SS = Stainless Steel
TF = Thread Forming
ZI = Zinc Plated

3
BASSMAN® 410 PRO SL LOUDSPEAKER
(This is the model name for warranty claims)
Product specifications are subject to change without notice.
SPECIFICATIONS
Model Name: Bassman 410 Pro SL
Release Number: PR 523 (Not a model number)
Part Number: 2217000000
Impedance: 8 ohms
Sensitivity: 94 dB, 1 Watt – 1 meter
Power Handling: 300 Watts, Continuous
600 Watts, Program
Drivers: Four 10” (25.4 cm) Fender® Special Design cast frame Woofers,
2” (5.1 cm) Voice Coil, 44 oz. (1.25 kg) Magnet (p/n 057982)
One Horn Tweeter
1” (2.5 cm) Voice Coil, 8 oz. (0.23 kg) Magnet
Connections: Dual, parallel wired, 1/4” (6.35 mm) high current Input Jacks and Binding Posts
Cabinet: 3/4” (1.9 cm) 7-ply Birch-Maple Plywood
Enclosure Volume: VB= 4.4 ft3(125 l)
Dimensions Height: 25 1/2 in (64.8 cm)
Width: 25 1/2 in (64.8 cm)
Depth: 18 1/2 in (47.0 cm)
Weight: 78 lbs (35.5 kg)

4
BASSMAN® 410 PRO SL LOUDSPEAKER
(This is the model name for warranty claims)
SERVICE NOTES
INPUT PANEL removal is required for fuse
replacement and is accomplished by following
these steps:
1. Remove the 4 screws from the input panel cor-
ners.
2. Pull the panel out, then up.
3. Use a small flathead screwdriver to remove the
blown lamp, which is visible through a cutout in
the circuit board.
4. Remove the spare lamp stowed on the side of
the circuit board and install it where the blown
lamp was removed.
5. Install the input jack plate in the reverse of re-
moval.
PCB EXCHANGE POLICY
Parts marked with a single asterisk (*) in the Part
Lists are not field replaceable. If a failure due to
one of these components is detected, please con-
tact the Fender® dealer Customer Service
Department to order the complete PCB Assembly.

5
BASSMAN® 410 PRO SL LOUDSPEAKER
(This is the model name for warranty claims)
*Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY on page 4.
Unique Fender® part. Order directly from the Fender® dealer Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
** Both a unique Fender® part and a Safety Requirement part as defined above.
PARTS LIST: PCB ASSEMBLY
QTY. PART # DESCRIPTION REFERENCE DESIGNATION
10057979000 **PCB ASSEMBLY BASSMAN 410 PRO
10057978000 PCB FABRICATION BASSMAN 410 PRO
20051861000 CAP MPF RDL 3.3 UF 250V 10%
40012555000 EYELET-ROLLED FLANGE G.S. 3-4
10051858000 INDUCTOR AIR CORE .18 MH
20029175000 JACK PHONE ¼” HI CURRENT PC
40053475000 **LAMP CLIP
20051857000 **LAMP TYPE 561
10059613000 WIRE SET PCB BASSMAN 410 PRO
PARTS LIST: INPUT ASSEMBLY
QTY. PART # DESCRIPTION REFERENCE DESIGNATION
10057983000 INPUT ASSY BASSMAN 410 PRO
10049348000 CONTROL L PAD 8 OHM 50W
10059612000 FIVE WAY BINDING POST
10029531000 KNOB KNURL BLK SUNN 1272/1275
20016352000 NUT HEX 3/8-32 X 3/32 TK NI
10057976000 PLATE INPUT BASSMAN 410 PRO
20031153000 WSHR FLAT 3/8 X .614 NI
20016436000 WSHR LCK INTL 3/8 X .687 X .035 NI
PARTS LIST: CABINET ASSEMBLY
QTY. PART # DESCRIPTION REFERENCE DESIGNATION
80057945000 CABINET CORNER, PLASTIC
2.745 0040046000 CARPET BLACK SY
20057946000 HANDLE, SPRING LOADED
40056482000 MOUNTING PLATE EL COM
32 0021972000 NUT T 10-32 X ¾ STR 3 PRNG BLX
32 0016627000 SCRW SMA 8 X ¾ OHP BLX
16 0027199000 SCRW SMAB 10 X ¾ PHP NI
20 0033380000 SCRW SMAB 8 X 1 THP BLX
PARTS LIST: END ITEM ASSEMBLY
QTY. PART # DESCRIPTION REFERENCE DESIGNATION
10057933000 CABINET ASSEMBLY BASSMAN 410 PRO SL
40056483000 CASTER SWIVEL EL COM 2-12 CABS
10055831000 GASKET, HORN BASSMAN AMPS
10057931000 GRILLE BASSMAN 410 PRO SL
10048847000 HORN FOSTER 8 OHM
10054212000 INPUT MOUNTING PLATE SUNN 410H
10055731000 LOGO BADGE BASSMAN AMPS
10057981000 MANUAL OWNERS BASSMAN 410 PRO
10047600000 NAMEPLATE FENDER BLACK
40050311000 NUT 2-56 NYLON INSERT 2CNME-Z
40050312000 SCRW 2-56 X 3/8 FHP NI
80030858000 SCRW 8 X 5/8 PHP NI
32 0057975000 SCRW M10-32 X 1-1/4 FLHP STL BLX
40026553000 SCRW M8-32 X 3/8 PHP BLX
80036112000 SCRW SMAB 6 X 1-1/4 OHP BLX W/WS
40033380000 SCRW SMAB 8 X 1 THP BLX
40057982000 SPEAKER 10 INCH 8 OHM CAST FRAME

6
BASSMAN® 410 PRO SL LOUDSPEAKER
(This is the model name for warranty claims)
*Non-serviceable part. Replace complete parent assembly. See PCB EXCHANGE POLICY on page 4.
Unique Fender® part. Order directly from the Fender® dealer Customer Service Department.
** Safety Requirement part. Replacement must match Safety Agency…–Value, if specified –Type, if specified –Approval Mark(s) if on part.
** Both a unique Fender® part and a Safety Requirement part as defined above.
PARTS LIST: END ITEM ASSEMBLY
QTY. PART # DESCRIPTION REFERENCE DESIGNATION
30057971000 SPEAKER PORT 3.00 DIA
80050317000 STANDOFF RUBBER .75 DIA X .77
10053489000 **WIRE SET FINAL SUNN 410H
Schematics and Drawings
Service Diagram (Schematic) ............Bassman 410 Pro SL
End Item Assembly ............Bassman 410 Pro SL

D