Festool KAL User manual

702483_003
Originalbedienungsanleitung/Ersatzteilliste 5
Original operating manual/Spare parts list 11
Notice d’utilisation d’origine/Liste de pièces de rechange 17
Manual de instrucciones original/Lista de piezas de repuesto 23
Istruzioni per l'uso originali/Elenco parti di ricambio 29
Originele gebruiksaanwijzing/Lijst met reserveonderdelen 35
Originalbruksanvisning/Reservdelslista 41
Alkuperäiset käyttöohjeet/Varaosaluettelo 46
Original brugsanvisning/Reservedelsliste 52
Originalbruksanvisning/Reservedelsliste 58
Manual de instruções original/Lista de peças sobresselentes 63
   /
  69
Originál návodu k obsluze/Seznam náhradních díl 76
Oryginalna instrukcja eksploatacji/Lista czci zamiennych 82
S Y S L I T E
KAL

1-2
1-3
1-1
1
1-4
1-5 1-6 1-7

PRESS
1
2
2
1
2-1
2A
2B

3
10°
15°
30°

11
KAL GB
Original operating manual
The specified illustrations appear at
the beginning of the Operating In-
structions.
1Symbols
2 Intended use
The compact working light was spe-
cifically designed for illuminating dry
areas in interior spaces.
The user bears the respon-
sibility for damage and ac-
cidents caused by improper
use.
3 Technical data
1Symbols 11
2 Intended use 11
3Technicaldata 11
4 Machine features 12
5 Safety instructions 12
6Operation 13
7 Service and maintenance 14
8 Accessories 15
9Disposal 15
10 Transport 15
11 Warranty 16
Warning of general danger
Risk of electric shock
Read the Operating
Instructions/Notes!
Warning against harmful
light radiation.
Do not look directly into
the light beam!
Do not throw in the house-
hold waste.
>0.25s
Compact working light KAL
Rated voltage / capacity of integral battery (LiIon) 7,2 V = / 2,2 Ah
Rated voltage with external Festool battery pack (BPC/
BPS)
10,8 - 18 V =

GB KAL
12
4 Machine features
* not on all versions included in the
scope of delivery
5 Safety instructions
Warning! Read all safety
warnings and all instructions.
Failure to follow the warnings and in-
structions may result in electric
shock, fire and/or serious injury.
Save all warnings and instruc-
tions for future reference.
– Handle the working light
with care.
The working light
may generate heat that increas-
es the risk of fire and explosions.
–
Never use the working light
in potentially explosive envi-
ronments.
– Do not cover the working
light when switched on.
The
working light heats up during
Charging socket voltage range 10,8 - 30 V =
Lighting device 6x 3W Power LED
Light duration (integral battery) Max. light: stage 1
(100%)
90 min.
Min. light: stage 2
(30%)
240 min.
Integral battery charging time 80%/ 100% 100 / 180 min.
Permitted operating temperature range -5 °C to +55 °C
Permitted battery temperature for charging 0 °C to +45 °C
Weight (without external battery pack) 0,7 kg
Compact working light KAL
- +
[1-1] Charging state indicator
[1-2] On/off switch with 3 settings
[1-3] Folding attachment handle
[1-4] Connecting socket for
charging adapter
[1-5] Mains charging adapter*
[1-6] Vehicle charging adapter
[1-7] Specific charging adapter
for country*
[2-1] Threaded socket for tripod
UNC 1/4"-20

13
KAL GB
operation and can burn the sur-
face of the skin.
–
Warning against
harmful light radia-
tion. Do not look
into the light beam
for long periods. Do not di-
rect the light beam towards
other people or animals.
Op-
tical radiation can damage the
eyes.
–
Do not use the working light
for road lighting applica-
tions.
The working light is not
approved for illuminating the
road.
–
Always use compatible Fes-
tool battery packs in the
working light.
Using other bat-
tery packs poses a fire hazard
and may cause personal injury.
–
Have your device repaired by
qualified specialist staff and
always use original spare
parts
to ensure that your device
operates reliably.
–
Always use original Festool
parts for repair and mainte-
nance.
The use of incompatible
accessories or spare parts can
result in electric shocks or other
injuries.
–
When charging the working
light, do not use charging
adapters from other manu-
facturers.
Otherwise there is a
danger of fire and explosion.
–
The device is not intended
for use by persons (including
children) with limited physi-
cal, sensory or mental ability
or without sufficient experi-
ence and/or knowledge, un-
less they are supervised by a
person responsible for their
safety or have been instruct-
ed on how to use the device.
Children should always be su-
pervised to ensure that they do
not play with the device.
– Protect the battery pack from
excessive heat or constant heat
sources such as sunlight or na-
ked flames. There is a risk of ex-
plosion.
– Never use water to extinguish
burning LiIon battery packs, al-
ways use sand or a fire blanket.
6Operation
6.1 Charging the integral bat-
tery pack
X Insert the mains or vehicle
charging adapter into the con-
necting socket
[1-4] .
When the light is switched off, the
charging state indicator
[1-1] dis-
plays the operating state of the inte-
gral battery for the duration of the
charging process:
Charging state indicator green -
flashing
Integral battery is charged at maxi-
mum capacity.

GB KAL
14
Charging state indicator green -
permanently lit
Integral battery is charged to 80%
and then charged fully with a re-
duced current.
Charging state indicator red -
flashing
General fault indication, e.g. incom-
plete contact, short circuit, battery
faulty.
Charging state indicator red -
permanently lit
Battery temperature is outside the
permitted range.
6.2 On/Off switch [1-2]
The on/off switch [1-2] has three
settings:
– Press once -> activate LED with
max. luminosity (stage 1:
100%)
– Press twice -> reduce the lumi-
nosity (stage 2: 30%)
– Press three times -> switch off
6.3 Setup options
Attachment handle [1-3]
The folding attachment handle al-
lows you to hang the working light
from scaffolding or similar struc-
tures.
L If you decide to operate the
light with an external Festool
battery pack, the attachment
handle must be detached be-
forehand
[2A] .
Setup angle
The working light can be positioned
at three different angles [3] .
Tripod
A standard photographic tripod with
UNC 1/4"-20 thread can be attached
to the threaded tripod socket
[2-1] .
6.4 Temperature monitoring
If the temperature of the light ex-
ceeds the maximum or minimum
permitted operating temperature,
the working light switches to emer-
gency power mode with reduced lu-
minosity and then switches off after
30 seconds.
6.5 Operating with external
Festool battery pack [2A]
+ [2B]
The working light can operate with
any Festool battery pack from the
BPC or BPS series. When connected
to the external Festool battery pack,
the working light only consumes
power from this battery pack.
L Only compatible Festool charg-
ers can charge the Festool bat-
tery pack.
7 Service and maintenance
– Always clean the plastic cover on
the working light using a soft,
dry cloth to prevent any dam-
age. Do not use solvents.
– Keep the contacts on the work-
ing light and battery pack clean.
– Always appoint an authorised
service workshop to replace
damaged integral batteries.

15
KAL GB
8 Accessories
Use only original Festool accessories
and Festool consumable material in-
tended for this machine because
these components are designed spe-
cifically for the machine. Using ac-
cessories and consumable material
from other suppliers will most likely
affect the quality of your working re-
sults and limit any warranty claims.
Machine wear or your own personal
workload may increase depending on
the application. Protect yourself and
your machine, and preserve your
warranty claims by always using
original Festool accessories and Fes-
tool consumable material!
The order numbers of the accesso-
ries and tools can be found in the
Festool catalogue or on the Internet
under "www.festool.com".
9Disposal
Prior to disposal
Remove the integral
battery from the de-
vice
! Dismantle the
housing components and
remove the battery. Dis-
pose of the battery using
our return service.
Do not throw the tool in your
household waste!!
Dispose of ma-
chines, accessories and packaging at
an environmentally responsible recy-
cling centre. Observe the valid na-
tional regulations.
EU only: European Directive 2002/
96/EC stipulates that used electric
tools must be collected separately
and disposed of at an environmental-
ly responsible recycling centre.
Return used or faulty battery packs
to your local specialist retailer, Fes-
tool after-sales service or a designat-
ed public waste management facility.
The battery packs will then be recy-
cled. (Observe the regulations appli-
cable in your country). The batteries
must be discharged on return.
EU only: European Directive 91/
157/EEC stipulates that faulty or
used battery packs/batteries must
be recycled.
REACh for Festool products, its
accessories and consumable
materials:
REACh is a European Chemical Direc-
tive that came into effect in 2007. As
"downstream users" and product
manufacturers, we are aware of our
duty to provide our customers with
information. We have set up the fol-
lowing website to keep you updated
with all the latest news and provide
you with information on all the mate-
rials used in our existing products:
www.festool.com/reach
10 Transport
The equivalent amount of lithium in
the LiIon battery pack is less than
the applicable limit value and certi-
fied as per UN manual ST/SG/
AC.10/11/rev. 3 part III, subsection
38.3. The LiIon battery pack is there-

GB KAL
16
fore not subject to national and in-
ternational dangerous goods regula-
tions, neither as an individual com-
ponent nor as a fitted machine
component. However, dangerous
goods regulations may apply when
several battery packs are transport-
ed, in which case you may have to
fulfil special conditions. Refer to ADR
special regulation 230 for more infor-
mation relevant for the EU.
11 Warranty
We offer a warranty for material and
production defects for all our tools in
accordance with the locally applica-
ble legal provisions, but for a mini-
mum of 12 months. Within the EU
member states, the warranty period
is 24 months (verification through in-
voice or delivery note). Damage
caused by the operator, natural wear,
overloading, incorrect handling or
through the use of the equipment
not specified in the operating manu-
al, or damage which was known at
the time of purchase, is not covered
by the warranty. Furthermore, dam-
age caused by the use of non-origi-
nal accessories and consumable ma-
terials (e.g. sanding pads) is also ex-
cluded.
Complaints can only be accepted if
the tool is returned while still assem-
bled to the supplier or an authorised
Festool Customer Service workshop.
Keep the operating manual, safety
instructions, spare parts list and pur-
chase receipt in a safe place. Other-
wise the current warranty conditions
of the manufacturer shall apply.
Note
Due to continuous research and de-
velopment work, we reserve the
right to make changes to the techni-
cal content of this documentation.