FFS FMP-ETP User manual

EVO™200 AND EVO™ 400
FMP-ETP
INSTALLATION GUIDE

The informaon in this publicaon is provided for reference only. While every eort has been made to ensure the
reliability and accuracy of the informaon contained in this manual at the me of prinng, we recommend that
you refer to “franklinfueling.com” for the most current version of this manual. All product specicaons, as well as
the informaon contained in this publicaon, are subject to change without noce. Franklin Fueling Systems does
not assume responsibility and expressly disclaims liability for loss, damage, or expense arising out of, or in any way
connected with, installaon, operaon, use, or maintenance by using this manual. Franklin Fueling Systems assumes
no responsibility for any infringement of patents or other rights of third pares that may result from use of this
manual or the products. We make no warranty of any kind with regard to this material, including, but not limited to,
the implied warranes of merchantability and tness for a parcular purpose.
Copyright © 2019 Franklin Fueling Systems, LLC, Madison, WI 53718. All world rights reserved. No part of this
publicaon may be stored in a retrieval system, transmied, or reproduced in any way, including, but not limited to,
photocopy, photograph, magnec, or other record, without the prior wrien permission of Franklin Fueling Systems.
For technical assistance, please contact:
Franklin Fueling Systems
3760 Marsh Rd.
Madison, WI 53718
USA
Web: franklinfueling.com
Tel: [phone] • Fax: [phone]
Tel: USA & Canada [phone] • Tel: UK [phone]
Tel: Mex 001 800 738 7610 • Tel: DE [phone] • Tel: CN [phone]
EVO is a trademark of Franklin Electric Company, Inc.
228180045 r1

Contents
Introducon ......................................................................................................................................1
Convenons used in this manual ..................................................................................................1
Quesons and concerns ................................................................................................................1
Operang precauons...................................................................................................................2
Installaon.........................................................................................................................................3
Install the printer ...........................................................................................................................3
Congure the console to use with the printer ..............................................................................4

Intenonally Blank

1
Introduction
This guide contains the procedure for connecng the FMP-ETP to the EVO™ 200 or EVO™ 400
automac tank gauge.
IMPORTANT: The FMP-ETP printer is only approved for use with EVO™ 200 or EVO™ 400
automac tank gauges.
Conventions used in this manual
This manual includes safety precauons and other important informaon presented in the
following format:
NOTE: This provides helpful supplementary informaon.
IMPORTANT: This provides instrucons to avoid damaging hardware or a potenal hazard to the
environment, for example: fuel leakage from equipment that could harm the environment.
CAUTION: This indicates a potenally hazardous situaon that could result in minor or
moderate injury if not avoided. This may also be used to alert against unsafe pracces.
WARNING: This indicates a potenally hazardous situaon that could result in severe injury or
death if not avoided.
DANGER: This indicates an imminently hazardous situaon that will result in death if not
avoided.
Questions and concerns
In case of emergency, follow the procedures established by your facility. If you have quesons or
concerns about safety or need assistance, use the informaon below to contact Franklin Fueling
Systems:
franklinfueling.com
3760 Marsh Rd. • Madison, WI 53718, USA
Tel: [phone] • Fax: [phone]
Tel: USA & Canada [phone] • Tel: UK [phone]
Tel: Mex 001 800 738 7610 • Tel: DE [phone] • Tel: CN [phone]

2
Operating precautions
Franklin Fueling Systems (FFS) equipment is designed to be installed in areas where volale
liquids such as gasoline and diesel fuel are present. Working in such a hazardous environment
presents a risk of severe injury or death if you do not follow standard industry pracces and the
instrucons in this manual. Before you work with or install the equipment covered in this manual,
or any related equipment, read this enre manual, parcularly the following precauons:
IMPORTANT: To help prevent spillage from an underground storage tank, make sure the delivery
equipment is well-maintained, that there is a proper connecon, and that the ll adaptor is ght.
Delivery personnel should inspect delivery elbows and hoses for damage and missing parts.
CAUTION: Use only original FFS parts. Substung non-FFS parts could cause the device to
fail, which could create a hazardous condion and/or harm the environment.
WARNING: Follow all codes that govern how you install and service this product and the
enre system. Always lock out and tag electrical circuit breakers while installing or servicing
this equipment and related equipment. A potenally lethal electrical shock hazard and the
possibility of an explosion or re from a spark can result if the electrical circuit breakers are
accidentally turned on while you are installing or servicing this product. Refer to this manual (and
documentaon for related equipment) for complete installaon and safety informaon.
WARNING: Before you enter a containment sump, check for the presence of hydrocarbon
vapors. Inhaling these vapors can make you dizzy or unconscious, and if ignited, they can explode
and cause serious injury or death. Containment sumps are designed to trap hazardous liquid
spills and prevent environmental contaminaon, so they can accumulate dangerous amounts
of hydrocarbon vapors. Check the atmosphere in the sump regularly while you are working in
it. If vapors reach unsafe levels, exit the sump and venlate it with fresh air before you resume
working. Always have another person standing by for assistance.
WARNING: Follow all federal, state, and local laws governing the installaon of this product
and its associated systems. When no other regulaons apply, follow NFPA codes 30, 30A, and 70
from the Naonal Fire Protecon Associaon. Failure to follow these codes could result in severe
injury, death, serious property damage, and/or environmental contaminaon.
WARNING: Always secure the work area from moving vehicles. The equipment in this manual
is usually mounted underground, so reduced visibility puts service personnel working on it in
danger from moving vehicles that enter the work area. To help prevent this safety hazard, secure
the area by using a service truck (or some other vehicle) to block access to the work area.
WARNING: Discharge stac electricity from the splice kit to ground before you install it, and
make sure it is properly grounded while in service.
DANGER: Make sure you check the installaon locaon for potenal ignion sources such as
ames, sparks, radio waves, ionizing radiaon, and ultrasound sonic waves. If you idenfy any
potenal ignion sources, you must make sure safety measure are implemented.

3
Installation
Install the printer
1. Connect the included USB cable from the port in the middle of the printer to the USB port
on the EVO™ 200 or EVO™ 400 automac tank gauge.
FMP-ETP Printer Ports EVO™ 200 and EVO™ 400 USB port
2. Push the cover opening lever and open the rear cover.
Insert the paper roll as pictured. (The paper is thermal and will print on only one side.) Pull
the end of the paper out straight and push down both sides of the printer to close.
3. Connect the included power cable to the power inlet on the back side of the printer, and
then connect the plug of the power cable to the outlet.
4. Turn on the power to the printer and make sure the blue LED lights.

4
Configure the console to use with the printer
1. Connect a computer to the EVO™ 200 or EVO™ 400, and open the FFS PRO® interface. (See
the EVO™ 200 and EVO™ 400 Automac Tank Gauges Programming Guide (part number
228180015) for more informaon.)
2. Choose Printers from the SETTINGS drop-down list.
3. Under Printers, click Search for printers under PRINTERS.
4. Make sure the printer is powered on and properly connected. The informaon for the URL,
Name, and Drivers elds appears in the table under PRINTERS.
5. Click Congure. The Conguraon page appears with the proper parameters populated.

5
6. Click SAVE at the top of the page to save your sengs.
7. Click REPORTS, and print a report to test that the conguraon is successful.

Intenonally Blank

Intenonally Blank

228180045 r1