FIBARO Motion Sensor User manual

MOTION SENSOR
MOTION, LIGHT & TEMPERATURE SENSOR
Quick Start Guide

2
If you need help configuring the FIBARO Motion Sensor,
take advantage of our guides and technical manuals available at:
manuals.fibaro.com/en/hk-motion-sensor
Support
Scan the code to
read the manual

3
Package Contents
Quick Start Guide,
Quick Manuals,
Warranty Terms
Holder
DeviceMounting parts
Sticker
Every Motion Sensor has a unique ID, the HomeKit Setup Code.
You will find the setup code on back cover of the Quick Start Guide.
* the mounting screw and a pin are
located under the extrusion apparatus
*

4
FIBARO app
homekit.fibaro.com/app
Download FIBARO application from the App Store.

5
First launch
Open the casing by turning
the cover counter-clockwise
Step 1
Take off the cover
Step 2
Remove the battery blocker
and check if the battery
is placed correctly
Step 3
Close the cover by
turning it clockwise
Step 4
The device will blink red
it is ready to be paired
!
Fig. 1 Fig. 2
Fig. 3 Fig. 4
By default, the sensor stays
breached for 30 seconds
after detecting motion.
!

6
Step 5
First launch
Open the FIBARO app
and tap Add accessory icon
Step 6
Application will guide you
through the pairing process
If you have already set up
another accessory tap icon +
!
Fig. 5

7
First launch
Resetting the Motion Sensor to factory defaults:
1. Open the cover
2. Press and hold the button
3. When the LED glows yellow, release the button
4. Click the button again to confirm
Button
Install the sensor’s holder in desired
location. Motion Sensor can be
mounted using screw or the sticker
Step 7
Insert the Motion Sensor
in its holder
Step 8
After resetting the accessory
will blink red — it is ready
to be paired again.
!
Fig. 6 Fig. 7
Fig. 8

© Fibar Group S.A.
All rights reserved
Made in Poland
www.fibaro.com 105433310101
Room: ..........................................
Write down the location of the device.
HomeKit Setup Code is needed to securely add accessory
to your home. You may need it in case of re-pairing.
Remember to keep it in safe place. Nobody but you has a copy.
FIBARO cannot recover the HomeKit setup code for you.