Filmcity FC-05 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Adventure Rig Kit (FC-05)
Assembly Manua l
5 x 300mm Female
Threaded Rods
MB-600 Mae Box Juncon Rod
Adapters
Top Handle
Sleek BMCC Camera
Cage
1 x Handle Set
Front Handle
Bracket Clamps Baery Mounng
Plate
2 x 100mm Male
threaded Rods Straight & Z-Bracket
Shoulder Pad
HS-2 Follow Focus
Gear Ring Set
Speed Crank Tools
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.

2
 Aach the quick release plate of your tripod
head to the boom of the cage and ghten
it using a screwdriver.
 Mount the cage onto any standard tripod
(Not Included) and secure it.
 Insert the camera (Not Included) into the
cage and ghten the top and boom screws
for security.
 Aach the top handle to the cage and
ghten the screws.
Rig Kit Setup
 Insert two 300mm female rods into the
camera cage base and ghten the knobs
properly to secure them.
 Then aach the straight bracket to one end
of the rods and secure it correctly with the
help of the provided knob.

3
 Then aach the shoulder pad and the
baery plate to the rods and ghten them
appropriately.
 Now aach two 100mm male rods at the
front to extend it for mounng your
handles and other accessories.
 Now insert the other two 300mm female
threaded rods into the straight bracket and
ghten the knob to secure them properly.
 Aach the gear ring to the camera lens and
ghten it correctly.
 Aach the follow focus onto the front rods
and secure appropriately with the help of a
provided knob.
 Now aach the mae box onto the same
front rods, align the knicker with the lens
barrel and ghten the knob.

4
YOUR FILMCITY ADVENTURE RIG KIT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
 Now slide in one 300mm female rod
through it to aach the handles and ghten
knobs to secure the adapters and rod
properly.
 Finally, screw both the handles into the
handle clamp and insert them into the rod.
 Aach the Z-Bracket in front of the mae
box and secure it correctly with the help of
the provided knob.

5
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.