Filmcity FC-GR-H User manual

I NS TR UC TI O N MA N UA L
All rights reserved
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied
by the applicable copyright statutes or in wring by the publisher.
DSLR Gear Head
(FC-GR-H)
Fo r d e mons trat ion p ur p o s e onl y

Filmcity DSLR Gear Head 2
INTRODUCTION
We understand that every professional camera needs a lot of accessories to capture exact-
ly the desired shot. But somemes with bigger set ups, it becomes dicult for operator to
achieve even, controlled and precise pan and lt movements on a tradional uid head.
Filmcity’s DSLR Geared head makes it possible for you to mount a heavy camera setup
without compromising on the precision and control on your pan and lts.”
Please inspect the contents of your shipped package to ensure you have received all that is
pictured and listed below.
 Filmcity DSLR Gear Head
 Half Bowl Adapter
 Storage Bag
Storage Bag
What’s In The Box
Filmcity DSLR Gear Head
Half Bowl Adapter AGS SG-2 Sil-Glyde Lubricant, 1 1/2 oz

Filmcity DSLR Gear Head 3
 Aach half bowl adapter into gear head as shown in the image.
ASSEMBLING YOUR FILMCITY DSLR GEAR HEAD
 Mount the gear head on your tripod stand (Not included). Then ghten the boom clamp to secure it
properly.
 Loosen the knob and remove the quick release
plate to mount your camera setup.

Filmcity DSLR Gear Head 4
NOTE: 1. The lng crank rotates to give lng
movement of 35° each side.
2. The panning cranks rotates to give panning
movement of 360 degree both side.
 Aach the quick release plate with the camera and ghten with the help of screw driver, then mount
the camera setup onto the gear head.
NOTE: The Gear Head features a fricon knob
that controls the pan rotaon speed & locking
knob that allows keeping the panning crank on
stac posion for gear head. Locking and
fricon
Panning
Panning
Tilng

Filmcity DSLR Gear Head 5
YOUR FILMCITY DSLR GEAR HEAD ALL DRESSED UP AND GOOD TO GO
(SHOWN WITH OTPIONAL ACCESSORIES)
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note that we will
not cover any shipping costs for returning the product to us. If any VAT or import dues are applied to
the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do not supply
or from mishandling in transit, accident, misuse, neglect, lack of care of the product , or service by anyone
other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or occurring
due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover the
complete cost of sending replacement parts within the warranty period. Aer that, Nominal cost of the
product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
Best to help you out. For any other assistance you can reach us via email.
For any other assistance you can reach us via email.