Filmcity FC-02 User manual

1
Instruction Manual
Camera Cage Shoulder
Rig Kit (FC-02)

2
Subject Page
Foreword 3
Introducon 4
Assembling 6-11
Warranty 12
At Filmcity, our goal is to ensure 100% Customer Sasfacon in all that we do.
We back our sales with a 1 year warranty from the date of purchase and work hard
to resolve any problems in the unlikely event one should arise.
With our commitment to connuous improvement and your Feedback, building on
our reputaon of providing aordable, quality products is
PRIORITY #1.
Table of Contents

3
Dear Client,
On behalf of all the people that work so hard to provide you with the most
up-to-date, exible and cost-ecient producon gear, we would like to welcome
you into the Filmcity family.
By purchasing your Camera Cage Shoulder Rig Kit, you have just joined a host of
designers, engineers, machinists, assembly, customer service and oce sta that
take great pride in all that they do. Our mantra of connuous improvement has
been the guiding principle of how we conduct our business since day one.
Once you have the opportunity to experience your new Camera Cage Shoulder Rig
Kit, we hope you will agree that we cra quality products at a compeve price.
Products designed to meet and exceed the standards of today’s real producon
world.
Standards set by our valued clients and standards we strive to maintain.
With Best Wishes,
Filmcity Team
Welcome To Filmcity!

4
A shoulder rig becomes invaluable equipment when you want to put the audience
into the heart of the acon. It lets you move with the subject maer while keeping
the camera stable, thus increasing the eciency of the producon.
Introducon
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received
everything that is listed below.
Mae Box MB-600
Clamps For
Handle Set
French and Side Flags
Front Handle Set Top handle
9” Cage Brackets
Accessories
Front Handle Bracket
3 x 300mm Female
threaded Rods
1x 300mm Female
threaded knurling Rod
2x 100mm Male
threaded Rods
2x 300mm male
threaded Rods
2x 200mm Female
threaded Rods
2x 150mm Male
threaded Rods
Top Handle
Bracket
Shoulder Pad Tripod Mounng
plate
Straight & Z Brackets
Front handle
bracket clamps
Camera Base with
Quick Release Counter Weight
Juncon Rod
Adapters

5
 Insert French Flag into Mae Box and ghten the screws. In the same way, insert Side Flags
into (big) slots provided and secure with the screws.
 Then aach Knicker on Conversion Ring.
NOTE: If the French Flag remains loose even
aer ghtening the knob, then slightly
ghten the allen bolt as shown.
Assembling MB-600 Mae Box

6
 Insert 300mm Female threaded Rods into Camera Base with Quick Release. Tighten bolts with
the help of provided allen key to secure them properly.
Assembling the Shoulder Kit
 Fix the Quick Release of your uid head to the boom of Camera Base and ghten bolts with
screw driver.
 Now mount it on uid head and secure
properly by ghtening the knob.

7
Mounng Camera
 Loosen Ratchet Knob and remove Quick
Release Plate by pressing the Quick
Release Pin.
Quick Release
Pin
Ratchet
Knob
 Fix the quick release plate with camera and ghten bolts using screw driver.
 Now mount camera with Quick Release Plate on the Camera Base and ghten knob properly
to secure it.

8
 Aach both Cage Brackets with rods
and ghten the knobs to secure them
appropriately.
 Insert 2x200mm female threaded rods into Cage Brackets on the top. Aach Top Handle
with 200mm Rods and ghten the knobs to secure it properly.
 Now aach Straight Bracket at the end of Rods and lock it ghtly with the help of provided
knob.

9
 Then insert 300mm male threaded rods into the Straight Bracket and ghten knob to
properly lock them.
 Aach Shoulder Pad and insert Counterweight into the rods and secure them properly.
 Then aach 150mm male rods
towards the front to extend it for
mounng other accessories

10
 Aach Juncon Rod Adapters with Front Handle Bracket. Then aach it with rods and
secure it properly with the help of allen key.
 Now slide-in 300mm Knurling Rod
through the Front Bracket and ghten
the knobs to secure properly.
Aaching Accessories
 Insert Clamps for Handle Set into the Rod and screw Handle into the Clamp.

 Finally mount Mae Box to the front of rods, align Knicker with Lens Barrel and ghten its
knot.
YOUR FILMCITY CAMERA CAGE SHOULDER RIG KIT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)

12
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import
dues are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
Best to help you out. For any other assistance you can reach us via email.
For any other assistance you can reach us via email.