Filmcity FC-02 User manual

All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied
by the applicable copyright statutes or in wring by the Publisher.
DSLR Camera Cage
Shoulder Rig Kit
I N S T R U C T I O N M A N U A L

Filmcity SHOULDER RIG KIT 2
INTRODUCTION
Our Filmcity Shoulder Rig kit meets and exceeds the requirement of DSLR users by providing
professional look and producon value at an aordable price.
IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is pic-
tured and listed below.
Matte Box MB-600
Straight & Z-
Bracket
Shoulder Pad
Junction rod adapter
French and Side Flags Front Handle Set
Camera Base with
Quick Release
Counter Weight
2x 150mm Male
threaded Rods
Top handle
2x 200mm Female
threaded Rods
3x 300mm Female
threaded Rods
9” Cage Brackets
2x 300mm male
threaded Rods
Accessories
Tripod Mounting
plate
Note: If you have purchased (FC-03) kit, then only you will receive the following along with the
above menoned parts:
Note: If you have purchased (FC-02) kit, then you will receive the following:
1x 300mm Female
threaded knurling Rod
2x 100mm Male
threaded Rods
Clamps For Handle Set
Top Handle
Bracket
Front Handle
Bracket
HS-2 Follow Focus Speed Crank Gear Belt

Filmcity SHOULDER RIG KIT 3
ASSEMBLING YOUR MB-600 MATTE BOX
 Insert the french ag in to the mae box and ghten the screws. Using the same approach,
insert the side ags into the (big) slots provided in the hinges and secure with the screws.
Note: If the french ag (top) remains
loose even aer ghtening the knob you
have to slightly ghten the allen bolt as
shown in the image.
 Aach knicker on conversion ring.

Filmcity SHOULDER RIG KIT 4
ASSEMBLING YOUR SHOULDER RIG KIT
 Insert the 300mm female threaded rods into the camera base with quick release and
ghten the bolt with the help of provided allen key to secure it properly.
 Now aach the quick release of your uid head with the camera base with quick release
and ghten the bolt with screw driver.
 Now mount it on uid head and
secure it properly by ghtening the
knob.

Filmcity SHOULDER RIG KIT 5
MOUNTING THE CAMERA
 Loosen the ratchet knob and remove
the quick release plate by pressing the
quick release pin.
 Aach the camera on quick release plate and ghten the bolt with screw driver.
 Now mount the camera on the camera base and tighten the knob to secure .

Filmcity SHOULDER RIG KIT 6
 Aach both the brackets with rods and
ghten the knobs to secure it properly.
 Insert the 2x200mm female threaded rods into cage brackets on the top . Then aach the
top handle with 200mm rods and ghten the knobs to secure it properly.
 Aach the straight bracket to the end of the rods and secure it properly with the help of
provided knob.

Filmcity SHOULDER RIG KIT 7
 Now insert the 300mm male threaded rods into the straight bracket and ghten the knob to
secure properly.
 Aach the shoulder pad and counterweight into the rods and secure it properly with
the help of provided knob.
 Aach the 150mm male rods at the
front to extend it for mounng your
mae box and handles.

Filmcity SHOULDER RIG KIT 8
 Aach gear ring to camera lens and ghten properly. Insert HS-2 follow focus to front of
rods and secure it properly with the help of provided knob.
 Now aach the mae box to the front of rods, align the knicker with the lens barrel and
ghten the knot.
Note: If you have purchased (FC-03) kit, follow the below steps as well:
ATTACHING THE FOLLOW FOCUS
NOTE: You can aach speed crank to follow
focus as per your requirement.

Filmcity SHOULDER RIG KIT 9
Note: The front handle bracket clamps are
the ones with allen bolts.
 Aach the front handle bracket clamps with bracket, aach it with the rods and secure it
properly with the help of allen key.
 Now insert 300mm knurling rod into the
front bracket and secure it properly with the
help of allen key.

Filmcity SHOULDER RIG KIT
Note: The front handle bracket clamps
are the ones without allen bolts
 Insert the handle clamp into the rods and screw the handle into the handle clamp.
 Insert the matte box in front side of rods barrel properly and tighten the knot.

Filmcity SHOULDER RIG KIT
YOUR FILMCITY DSLR CAMERA CAGE SHOULDER RIG KIT
ALL DRESSED UP AND GOOD TO GO
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import
dues are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
best to help you out.
For any other assistance you can reach us via email.
Shown with oponal accessories