Fine Life Audio NV-03304 User manual

1
Bluetooth Water Resistant Speaker
Model #: NV-03304
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE USE

2
Getting started
•Remove the Bluetooth speaker & accessories from the box.
•Remove all packaging from the Bluetooth speaker.
•Retain instructions for future reference
•Place the packaging inside the box to either store or dispose of safely.
In the Package
•Bluetooth Wireless Speaker
•AUX Cable
•USB Charging Cord
•Instruction Manual
Features
•Enjoy music wirelessly
•IPX4 water resistant
•Easy to switch between calls and music
•Answer and end a call at click of a button.
•Volume Control
•Every time the speaker is turned on, it connects to last connected device automatically
•Built-in rechargeable battery
•Clear sound with bass effect
•Work Time up to 10 hours
•Standby time up to 230 hours
Safety Instructions
Keep the unit away from heat sources, direct sunlight.
Do not use the unit if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified electrician.
Improper repairs may place the user at serious risk.
Do not put objects into any of the openings.
Keep the unit free from dust, lint etc.
Do not use this unit for anything other than its intended use.
Keep the unit out of reach of children.
This product is not a toy.

3
Description of Parts
INSTRUCTIONS FOR USE
Charging Instructions
The speaker comes with a built in rechargeable battery. Before using it for the first time it is
recommended you charge the battery fully.
Connect the USB cable to a computer USB port and the Micro USB plug to the charging slot of
the speaker. The Red LED illuminates while the speaker is being charged. It takes around 4-5
hours for the unit to fully charge. When the battery is fully charged the red LED will turn off.
When the battery is low, you can hear “No battery, please re-charge” form speaker every 1
minutes. When this occurs, please charge the speaker.
1 Micro USB charging slot
2 Battery Charging Indicator
3 on/off switch
4 Line in 3.5mm jack
5 Bluetooth LED Indicator
6 “-” button: Decrease Volume
7 “+“ button: Increase Volume
8 Previous track button
9 Next track button
10 Multi-function button (MFB): answer a call/end a call/reject a call/Pause/Play
11 Built-in Microphone

4
Turning on/off the speaker
There is an on/off switch at the bottom of the speaker. You can turn on/off the speaker with this
switch. In order to save power, put the switch to off position when the speaker is not in use.
Pairing the speaker with Bluetooth devices (phone or music device)
Switch on the speaker, you can hear “Bluetooth model has been open” from Speaker
Place the speaker and Bluetooth device (phone or music device) so that they are no further
than 3 feet apart;
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer
to the manufacturer’s instructions for instructions on enabling Bluetooth on your device.
Once you have activated Bluetooth on your device, select the speaker “NV-03304” from the list
of available Bluetooth devices.
If required, enter the password ‘0000’ to confirm & finalize pairing.
Once paired successfully, the blue LED flashes one times every one seconds, and you can
hear “Paired” from speaker. You can now start to use the speaker.
If pairing is unsuccessful, turn off the speaker first and then re-pair following the above steps.
Once you have paired the speaker with a device, the speaker will remember this device and
will pair automatically when the device’s Bluetooth is activated and in range. You do not need
to re-pair any previously connected devices.
The speaker will attempt to automatically connect to the last device it was paired with when
switched on. If you want to pair it with a new device please a long press on the MFB button and
you can hear “waiting for a Pair” from Speaker.
Once the speaker is paired with your device the music will transmit directly to the speaker.
Please refer to your device’s user manual for further information.
Function Summary
Listening to Music
Once the speakers are paired with your device you can stream music wirelessly through the
speaker. Select the track you wish to listen to and it will be streamed to your Bluetooth speaker.
Should you encounter any problems while streaming please refer your device’s user manual
for further information.
Control Function
If your Bluetooth device supports AVCRP (Audio/Video Remote Control Profile) you can use
the Bluetooth speakers to perform basic remote functions once paired while listening to music.
The functions in the below table may differ depending on your device. Please refer to your
device’s user manual for further information.

5
Function Operation Button
Increase Volume Playing music A short press on the +button once will increase the
volume
Decrease Volume Playing music A short press on the -button once will decrease the
volume
Previous track Playing music A short press on the << button once will turn to the
Previous track
Next track Playing music A short press on the >> button once will turn to the
next track
Please note that your Bluetooth device must support AVCRP (Audio/Video Remote
Control Profile) in order to operate the above functions.
Making a call with the speaker
Basic operation
Function Operation Button
Answer ACall Incoming Call Press the MFB once to answer an incoming call.
Cancel calling Calling A short press on the MFB button
Reject a call Incoming Call Press and hold the MFB button for 2-3 seconds
End a call Incoming Call Short press the MFB button
Increase Volume During a call A short press on the +button once will increase the
volume
Decrease Volume During a call A short press on the -button once will decrease the
volume
Please Note
•Not all mobile phones support all the functions listed above. Please refer to your cell
phone’s user’s manual for further information.
•Certain functions and indication tones maybe vary depending on your mobile phone.
•When the volume is adjusted to max, you will hear an indication tone.
Aux Input
Make sure the Speaker is turned ON, connect the AUX cable to the audio port and the other
plug to the speaker’s AUX input, and you can enjoy the music form the speaker. In this case,
the previous track and Next track button can not control the AUX model.
(Note: Once connect the AUX cable, the Bluetooth model will disconnected)