Finlux 16FLY910LVD User manual

colour television
väri-tv
owner’s manual
käyttöohje
16FLY910LVD

English - 1 -
Contents
Features ................................................................. 2
Introduction............................................................. 2
Preparation............................................................. 2
Safety Precautions ................................................. 3
Power.................................................................. 3
Package Contents.................................................. 5
Environmental Information ..................................... 5
Repair Information.............................................. 5
Remote Control Buttons......................................... 6
LED TV and Operating Buttons.............................. 7
Viewing the Back side Connections ....................... 7
Viewing the Connections - Side Connectors.......... 8
Power Connection.................................................. 8
Aerial Connection................................................... 9
Using Digital Multimedia Connectors...................... 9
USB Memory Connection...................................9
Connecting the LED TV to a PC............................. 9
Using Side AV Connectors ..................................... 9
Connecting to a DVD Player via HDMI................. 10
Connecting to a DVD Player via Component
Sockets (YPbPr) or Scart Cable........................... 10
Remote Control Handset...................................... 10
Inserting Batteries............................................. 10
Switching On/Off....................................................11
To Switch the TV On..........................................11
To Switch the TV Off..........................................11
Input Selection.......................................................11
Basic Operations...................................................11
Operation with the Buttons on the TV................11
Volume Setting...............................................11
Programme Selection....................................11
AV Mode ........................................................11
Operation with the Remote Control...................11
Volume Setting...............................................11
Programme Selection
(Previous or Next Programme)......................11
Programme Selection (Direct Access)...........11
Viewing Electronic Programme Guide (EPG)....... 12
First Time Installation............................................ 13
Installation ............................................................ 14
Auto Channel Scan (Retune) Menu Operation.14
Manual Tuning ..................................................... 14
Digital Aerial Manual Search.............................14
Digital Cable Manual Search............................14
Analogue Manual Search.................................15
Analogue Fine Tune.......................................... 15
Network Channel Scan.....................................15
Clear Service List (*).........................................15
Managing Stations: Channel List.......................... 16
Operating the Channel List...............................16
Moving a Channel.............................................16
Deleting a Channel...........................................16
Renaming a Channel........................................16
Locking a Channel............................................16
Managing Stations: Favourites............................. 17
Button Functions............................................... 17
Managing Stations: Sorting Channel List ............. 17
On-Screen Information......................................... 17
Media Playback Using Media Browser................. 17
Viewing Videos via USB .................................. 18
Viewing Photos via USB...................................18
Slideshow Options............................................ 18
Playing Music via USB .....................................18
Media Browser Settings....................................19
Changing Image Size: Picture Formats................ 19
Configuring Picture Settings................................. 20
Operating Picture Settings Menu Items............20
Picture Settings Menu Items.............................20
PC Picture Settings...........................................21
Configuring Sound Settings.................................. 21
Operating Sound Settings Menu Items.............21
Sound Settings Menu Items..............................21
Configuring Your TV’s Settings.............................22
Operating Settings Menu Items........................22
Settings Menu Items.........................................22
Using a Conditional Access Module..................... 22
Viewing ConditionalAccess Menu (*)............... 22
Configuring Language Preferences......................23
Language Settings............................................ 23
Parental Control.................................................... 24
Parental Settings Menu Operation ...................24
Timers................................................................... 24
Setting Sleep Timer .......................................... 24
Setting Programme Timers............................... 24
Configuring Date/Time Settings............................25
Configuring Source Settings................................. 25
Configuring Other Settings................................... 25
Other Features ..................................................... 26
Teletext................................................................. 27
Tips....................................................................... 27
Appendix A: PC Input Typical Display Modes.......28
Appendix B: AV and HDMI Signal
Compatibility (Input Signal Types)........................28
Appendix C: Supported DVI Resolutions..............29
Appendix D: Supported File Formats
for USB Mode....................................................... 29
Appendix E: Software Upgrade............................ 30
Specifications ....................................................... 31
Digital Reception (DVB-T).................................... 31
Digital Reception (DVB-C).................................... 31
MOBIL TV INSTRUCTION MANUAL ................... 32
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 1A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 1 17.03.2011 15:58:0917.03.2011 15:58:09

English - 2 -
Features
Remote controlled colour LED TV.• Fully integrated Terrestrial digital-cable TV (DVB-T• C- MPEG2) (DVB-T-C MPEG4).
HDMI connectors for digital video and audio. This• connection isalsodesignedto accepthighdefinition
signals.
USB input.• 1000 programmes (analogue+digital).• OSD menu system.• Integrated tuner DVB-T-C HD, MPEG2 / MPEG4• compatible.
Scart socket for external devices (such as video,• video games, audio set, etc.).
Stereo sound system. (German+Nicam)• Teletext, fastext, TOP text.• Headphone connection.• Automatic programming system.• Forward or backward manual tuning.• Sleep timer / Child lock.• Automatic sound mute when no transmission.• NTSC playback.• AVL (Automatic Volume Limiting).• Auto power down.• PLL (Frequency Search).• PC input.• Plug&Play for Windows 98, ME, 2000, XP, Vista,• Windows 7.
Game Mode•
Introduction
Please read the corresponding instructions of this
handbook prior to the first usage of the device, even
when the usage of electronic devices is familiar
to you. Notice especially the chapter SAFETY
PRECAUTIONS. Carefully keep the handbook as
future reference. When selling the device or giving it
away, absolutely give these direction for use.
Thank you for choosing this product. This manual will
guide youfortheproper operation of yourTV.
Before operating the TV, please read this
manual thoroughly. Please do keep this
manual in a safe place for future references.
This device is intended to receive and display TV
programs. The different connection options make
an additional expansion of the reception and display
sources possible (receiver, DVD player, DVD
recorder,
VCR, PC etc.). This device is only suitable for the
operation in dry interiors. This appliance is intended
solely for private domestic use and may not be used
for industrial and commercial purposes. We exclude
liability in principle, if the device is not used as
intended, or unauthorized modifications have been
made. To operate your LED TV in extreme ambient
conditions may cause the damage of the device.
Preparation
For ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, please do not place any objects on top of
the set. Use this device in moderate climates.
10 cm
10 cm
10 cm
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 2A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 2 17.03.2011 15:58:1017.03.2011 15:58:10

English - 3 -
Safety Precautions
Read the following recommended safety
precautions carefully for your safety.
Power
• Always use the provided AC adaptor.
Operate only from the power source specified on• the AC adaptor.
The power adaptor may become hot during normal• operation. This is not a malfunction.
Please make sure that the adaptor is not covered• while in operation. Leave a space of 15 cm
(minimum) around the AC adaptor.
The rating information and safety caution of theAC• adaptor are provided on the adaptor.
WARNING:When the set is not inusefora long time,
disconnect from the power.
Power Cord
Do not place the set, a piece of furniture, etc. on the
power cord (mains lead) or pinch the cord. Handle the
power cord by the plug. Do not unplug the appliance by
pulling from the power cord and never touch the power
cordwithwethandsasthiscouldcausea shortcircuitor
electricshock.Nevermakea knotinthecordor tieitwith
othercords.Thepowercordsshouldbeplacedin sucha
waythattheyarenotlikelytobesteppedon.Adamaged
powercordcan cause fire orgive you anelectric shock.
When itis damaged andneeds to bereplaced, it should
be done by qualified personnel.
Moisture and Water
Do not use this device in a humid and
damp place (avoid the bathroom, the
sinkin thekitchen,and nearthewashing
machine). Do not expose this device to
rain or water, as this may be dangerous
and do not place objects filled with
liquids, such as flower vases, on top.
Avoid from dripping or splashing.
Ifanysolid objectorliquid fallsintothe cabinet, unplug
the TV and have it checked by qualified personnel
before operating it any further.
Cleaning
Before cleaning, unplug the TV set
from the wall outlet. Do not use liquid
or aerosol cleaners. Use soft and dry
cloth.
Ventilation
Theslotsand openings on theTV set areintendedfor
ventilationandto ensurereliableoperation.To prevent
overheating, these openings must not be blocked or
covered in anyway.
Heat and Flames
The set should not be placed near to
open flames and sources of intense heat
such as an electric heater. Ensure that
no open flame sources, such as lighted
candles,areplacedon top of theTV.Batteries should
not be exposed to excessive heat such as sunshine,
fire or the like.
Lightning
In case of storm and lightning or when
going on holiday, disconnect the power
cord from the wall outlet.
Replacement Parts
Whenreplacementparts are required,makesure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
samespecificationsas the originalone.Unauthorized
substitutions may result in fire, electrical shock or
other hazards.
Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover
yourselfasthismay result in anelectric
shock.
Waste Disposal
Instructions for waste disposal:•
Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
Batteries,includingthose which areheavymetal-free,
should not be disposed of with household waste.
Please dispose of used battery in an environment
friendly manner. Find out about the legal regulations
which apply in your area.
Don’ttryto recharge batteries. Dangerofexplosion.• Replace batteries only with the same or equivalent
type.
Thissymbolon the productoron itspackagingmeans
that your electrical and electronic device
should be disposed at the end of its
servicelifeseparatelyfromyourhousehold
wastes. There are separate collection
systems for recycling in EU. For more
information, please contact the local
authority or the dealer where you
purchased the product.
Disconnecting the Device
The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 3A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 3 17.03.2011 15:58:1017.03.2011 15:58:10

English - 4 -
Licence Notification (optional)
is a trademark of SRS Labs, Inc.
TruSurroundtechnologyis incorporated underlicense
from SRS Labs, Inc.
Licence Notification (Optional)
Manufactured under license from Dolby
Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
The Standby Off/On button doesn´t separate this
device completely from mains. Moreover the device
consumespowerinthe standby operation. Inorderto
separatethedevice completelyfrommains, themains
plughastobe pulled fromthemainssocket. Because
of that the device should be set up in a way, that an
unobstructed access to mains socket is guaranteed,
so that in case of emergency the mains plug can be
pulled immediately.To exclude the danger of fire, the
power cord should principally be separated from the
mains socket prior to a longer period of non-usage,
i.e. during vacations.
Electrical device not in the hands of children
Neverletchildren use electrical deviceunsupervised.
Children can´t always recognize properly the
possible dangers. Batteries / accumulators can be
life threatening when swallowed. Store batteries
unreachable for small children. In case of swallowing
a battery medical aid has to be sought immediately.
Also keep the packaging foils away from children.
There is danger of suffocation.
Note: The HDMI connection between PC and TV
may cause radio interference in which case it is
recommended to use VGA(DSUB-15) connection.
Headphone Volume
Excessivesoundpressurefrom earphones
and headphones can cause hearing loss.
Installation
To prevent injury, this device must be securely
attachedtothe wall inaccordancewith the installation
instructions when mounted to the wall (if the option
is available).
LED Screen
TheLEDpanelisa very high technology product with
about a million thin film transistors, giving you fine
picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed blue, green or
red point. Please note that this does not affect the
performance of your product.
Warning!Donot leave yourTV instandbyor operating
mode when you leave your house.
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Device connected to the protective earthing of the
building installation through the mains connection or
throughotherapparatuswithaconnectiontoprotective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a
fire hazard.
Connection to a cable distribution system has
therefore to be provided through a device providing
electrical isolation below a certain frequency range
(galvanic isolator, see EN 60728-11).
Be sure to ground the connection properly.
Connect the ground terminal of the AC adaptor with the ground
terminal provided at the power outlet using the enclosed power cord.
If the provided plug does not fit your outlet, consult an electrician for
replacement of the obsolete outlet.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 4A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 4 17.03.2011 15:58:1217.03.2011 15:58:12

English - 5 -
Package Contents
REPEAT
ZOOM TITLE
ROOT
TEXT SWAP
123
456
789
SCREEN
0
LANG SUBTITLE
OK
MENU
SOURCE
RETURN
INFO
FAV SLEEP EPG
SEARCH DISPLAY
MODE
P+
PRESETS
P-
V+
V-
Remote Control
LED TV
Batteries: 2 X AAA
Instruction Book
1 X Video &Audio Connection Cable
Note: You should check the accessories after
purchasing. Make sure that each accessory is
included.
Environmental Information
This television is designed to consume less energy• to save environment.
You not only help to save the environment but also
you can save money by reducing electricity bills
thanks to the energy efficiency feauture of this TV.
To reduce energy consumption, you should take the
following steps:
You can use Power Save Mode setting, located in• the Feature menu. If you set Power Save Mode
as On, the TV will switch to energy-saving mode
and luminance level of TV set will be decreased to
optimum level. Note that some picture settings will
be unavailable to be changed when the TV is in
Power Save Mode.
When the TV is not in use, please switch off or• disconnect the TV from the mains plug. This will
also reduce energy consumption.
Disconnect power when going away for longer• time.
Note that annually, using the TV set in Power Save• Modehasmore power efficiencythan disconnecting
the TV from the mains plug instead of keeping
stand-bymode.Therefore itishighlyrecommended
to activate Power Save Mode setting to reduce
your annual power consumption.And also it is
recommended to disconnect the TV from the mains
plug to save energy more when you do not use.
• Please helps us to save environment by following
these steps.
Repair Information
Please refer all servicing to qualified personnel. Only
qualifiedpersonnel must repairtheTV. Pleasecontact
your local dealer, where you have purchased this TV
for further information.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 5A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 5 17.03.2011 15:58:1217.03.2011 15:58:12

English - 6 -
Remote Control Buttons
No function1. Play (in Media Browser mode)2. No function3. Rapid reverse (in Media Browser mode)4. No function5. Mono/Stereo - Dual I-II / Current Language6. Expand (in TXT mode) / Image size /7. Green button8. Red button / Zooms Photos (in Media Browser9. video mode)
Numeric buttons10. Teletext / Mix11. Info / Reveal (in TXT mode)12. Programme Down - Page up / Programme Up -13. Page down
Mute14. Favourite mode selection15. Exit (in DTV mode) / Return / Index page (in16. TXT mode)
No function17. No function18. Exit USB menu19. Picture mode selection / Changes picture mode20. (in Media Browser video mode)
Electronic Programme Guide21. Sleep timer22. Menu on/off23. OK / Select / Hold (in TXT mode) / Channel List24. Volume up / down25. Navigation buttons26. AV / Source27. Previous programme28. Blue button29. No function30. No function31. Subtitle on-off / TXT subtitle (analogue TV32. mode) / Subtitle (in Media Browser mode).
No function33. Rapid advance (in Media Browser mode)34. Stop (in Media Browser mode)35. Pause (in Media Browser mode)36. Standby37. Operation LED light38.
REPEAT
ZOOM TITLE
ROOT
TEXT SWAP
123
456
789
SCREEN
0
LANG SUBTITLE
OK
MENU
SOURCE
RETURN
INFO
FAV SLEEP EPG
SEARCH DISPLAY
MODE
P+
PRESETS
P-
V+
V-
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 6A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 6 17.03.2011 15:58:1417.03.2011 15:58:14

English - 7 -
LED TV and Operating Buttons
FRONT and REAR VIEW Control buttons VIEW Control Buttons
P\V-AV
1. Standby Off/On button
2. TV/AV button
3. Programme Up/Down buttons-
Volume Up/Down buttons
Note:You can use +/- buttons
to change volume. If you want
to change channels, press P/V/
AV button once and then use
+/- buttons. If you hold the P/V/
AV button about a few seconds,
source OSD will be displayed.
Main menu OSD cannot be
displayed via control buttons.
Viewing the Back side Connections
HDMI 1
SPDIF
Coax.OUT
12V
DC IN
HDMI 1: HDMI Input1. HDMI Inputs are for connecting a device that has an HDMI socket. Your LED TV is capable of
displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI
connection.
RF Input2. connects to an aerial antenna system or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
SCART3. input or output for external devices. Connect the SCART cable between SCART socket onTV and
SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch toAV mode.
PC Input4. is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
Note: You can use YPbPr to VGA cable(not supplied) to enable YPbPr signal via PC input.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 7A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 7 17.03.2011 15:58:1417.03.2011 15:58:14

English - 8 -
SPDIF Coaxial Out5. outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has SPDIF input.
DC 12 V Input6. is used for connecting the supplied power adaptor.
V+ V+
V- V-
.
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that1. you subscribe to. For more information, see “Conditional Access” section.
Side USB input.2. TV control buttons.3. Side audio-video connection4. input is used for connecting video and audio signals
of external devices. To make a video connection, you must use the suppliedAV
connection cable for enabling connection. First, plug singular jack of the cable to the
TV’s SideAV socket. Afterwards, insert your video cable’s (not supplied) connector into
the YELLOW input (located on the plural side) of the suppliedAV connection cable.
Colours of the connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV
connection cable. Afterwards, insert your device’s audio cable’s connectors into
the RED and WHITE jack of the supplied side AV connection cable. Colours of the
connected jacks should match.
Note: You should use audio inputs of side AV connection cable (RED & WHITE)
to enable sound connection when connecting a device to your TV by using PC or
COMPONENT VIDEO input.
Headphone jack is used for connecting an external headphone to the system. Connect5. to the HEADPHONE jack to listen to the TV from headphones (optional).
Power Connection
IMPORTANT: The TV set is designed to operate on 12 V DC. For this, an adaptor is used which gives
12 V voltage. Connect this adaptor to a system that supplies 110-240V AC, 50/60Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the• mains.
To POWER
INPUT DC 12 V
terminal
AC adapter
HDMI 1
SPDIF
Coax.OUT
12V
DC IN
USB
5Vdc
Max:500mA
P\V-AV
SIDE AV
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 8A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 8 17.03.2011 15:58:1617.03.2011 15:58:16

English - 9 -
Aerial Connection
Connect the aerial ,cable TV plug to the AERIAL• INPUT socket located at the rear of the TV.
HDMI 1
SPDIF
Coax.OUT
12V
DC IN
Aerial or Cable
Using Digital Multimedia
Connectors
You can connect USB devices to your TV by using• the USB input of the TV. This feature allows you to
display/play JPG, MP3 and video files stored in a
USB stick.
It is possible that certain types of USB devices (e.g.• MP3 Players) may not be compatible with this TV.
You may back up your files before making any• connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not
be responsible for any file damage or data loss.
Do not pull out USB module while playing a file.•
CAUTION: Quickly plugging and unplugging USB
devices, is a veryhazardous operation. Especially,
do not repeatedly quickly plug and unplug the
drive. This maycause physical damage tothe USB
player and especially the USB device itself.
SIDE VIEW USB MEMORY
5Vdc
Max:500mA
USB
USB Memory Connection
IMPORTANT: The TV should be switched off while
plugging or unplugging a USB device. Plug your
USB devices to the USB input of the TV. You can
connect a usb device to your TV by using the USB
input of the TV.
Note: It is possible certain types of hard disk drives
are not supported.
Connecting the LED TV to a
PC
Fordisplayingyourcomputer’sscreenimage on your
LEDTV,you canconnectyour computertotheTVset.
Power off both computer and display before making
any connections. Use 15-pin D-sub display cable to
connect a PC to the LED TV. When the connection
is made, switch to PC source. See “Input selection”
section. Set the resolution that suits your viewing
requirements. Resolution information can be found
in the appendix parts
.
PC Input
(back)
Side AV Input
PC VGA Cable
(Not supplied)
PC Audio Cable
(Not supplied)
Side Audio/Video
Connection Cable
(Supplied)
Or
SIDE AV
Using Side AV Connectors
You can connect a range of optional equipment to your
LED TV using side connectors of the TV.
For connecting a camcorder or camera , you should• use AV socket (side). To do this, you must use the
suppliedvideo/audio connection cable.First, plug
single jack of the cable to the TV’s AV IN socket
(side). Afterwards, insert your camera cable’s (not
supplied)connectorsinto theplural partofthe video/
audio connection cable.Coloursof the connected
jacks should match. See illustration below.
Afterwards,you shouldswitchto• SideAV source.See
the section Input selection in the following sections
for more information.
Camera
AV Connection
Cable (supplied)
AV Cable
(not supplied)
Headphone
SIDE AV
To listen the TV sound from headphones, you• should connect headphones to your TV by using the
HEADPHONE jack as illustrated above.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 9A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 9 17.03.2011 15:58:1717.03.2011 15:58:17

English - 10 -
HDMI 1
SPDIF
Coax.OUT
12V
DC IN
Scart Cable
(not supplied)
External device
Note:Thesethree methods ofconnectionperform the
same function but in different levels of quality. It is not
necessary to connect by all three methods.
Remote Control Handset
Inserting Batteries
Remove the battery cover located on the back of• the handset by gently pulling backwards from the
indicated part.
Insert two• AAA/R3 or equivalent type batteries
inside. Observe the correct polarity (+/-) when
inserting batteries and replace the battery cover.
Note: Remove the battery from remote control
handset when it is not to be used for a long period.
Otherwise it can be damaged due to any leakage of
batteries. Remote range is approximately 7m/23ft.
Connecting to a DVD Player via
HDMI
Please refer to your DVD player’s instruction book
for additionalinformation.Power off boththe TVand
the device before making any connections.
Note: Not all cables shown in the illustration are
supplied.
If your DVD player has an• HDMI socket, you can
connect via HDMI for better video and audio quality.
HDMI 1
SPDIF
Coax.OUT
12V
DC IN
External device
(not supplied)
HDMI Cable
WhenyouconnecttoDVDplayerasillustratedabove,• switch to the connected HDMI source. See, Input
Selection section for more information on changing
sources.
Connecting to a DVD Player via
Component Sockets (YPbPr) or
Scart Cable
Some DVD players are connected through• COMPONENT SOCKETS (YPbPr). YPbPr can be
used only when you connect a device that has a
YPbPr output through the PC input with YPbPr to
PC cable (YPbPr cable is not supplied).
When the connection is made, switch to YPbPr• source. See, “Input selection” section.
To enable audio connection, use the• VGA/
Component Audio cable. First, plug single jack
of the cable to the TV. Afterwards, insert your DVD
player’s audiocable’sconnectors intotheplural part
of the VGA/Component audio connection cable
(see illustration below). Colours of the connected
jacks should match ( RED & WHITE).
AV Connection
Cable (supplied)
Audio Cable
(not supplied)
To DVD Player's
Audio Outputs.
SIDE AV
Whentheconnectionismade,switchto• YPbPrsource.
See, Input selection section.
You may also connect through the• SCART input.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 10A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 10 17.03.2011 15:58:1817.03.2011 15:58:18

English - 11 -
Switching On/Off
To Switch the TV On
Connect the power cord to the 110-240VAC, 50/60• Hz. Then the standby LED lights up.(The led will
blink during the standby On/Off)
To switch on the TV from standby mode either:•
Press the “• ” button, P+ / P- or a numeric button
on the remote control.
Press the “• ” button, -or +button on the TV. The
TV will then switch on.
Note: If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
By either method the TV will switch on.
To Switch the TV Off
Pressthe“• ” button ontheremotecontrol or press
the “ ” switch on the TV, so the TV will switch to
standby mode.
To power down the TV completely, unplug the• power cord from the mains socket.
Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
Input Selection
Once you have connected external systems to
your TV, you can switch to different input sources.
Press “SOURCE” button on your remote control
consecutively for directly changing sources.
Note: YPbPr mode can be used only when you
connectadevicethat has aYPbPr output through the
PC input with YPbPr to PC cable (not supplied).
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Main menu OSD cannot be displayed via control
buttons.“+/-”buttons will functionasvolumeup/down
as default. Even if you set other functions for these
buttons, “+/-” buttons will perform as default after a
short while.
Volume Setting
Press “• P/V/AV” button once and then use “+/-”
buttonstoincreaseordecrease volume,soa volume
level scale (slider) will be displayed on the screen.
While Tv is on, +/- button can use as volume + or
volume - as default.
Programme Selection
Press“• P/V/AV”button onceandthenuse“+/-”buttons
to change channel. By pressing “+/-” button,you can
select the next or previous programme.
AV Mode
Hold the “• P/V/AV” button, source OSD will be
displayed in a few second.
Operation with the Remote Control
Theremotecontrolof yourTVis designed to control• all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
Press“• V+”buttonto increase thevolume.Press “V-”
buttontodecrease the volume.Avolumelevel scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
Press “• P-” button to select the previous
programme.
Press “• P+” button to select the next programme.
Programme Selection (Direct Access)
Pressnumeric buttonson theremote controltoselect• programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between, press the numeric buttons consecutively.
When the pressing time is due for the second
numeric button, only the first digit programme will
bedisplayed. Pressdirectly theprogrammenumber
to reselect single digit programmes.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 11A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 11 17.03.2011 15:58:1917.03.2011 15:58:19

English - 12 -
Viewing Electronic Programme
Guide (EPG)
You can view the electronic programme guide (EPG)
to view information about available programmes.To
view the EPG menu please press EPG button on the
remote control.
Press “• ”/“ ” buttons to navigate through channels.
Press “• ”/“ ” buttons to navigate through the
programme list.
EPG menu displays available information on all• channels.
Please note that event information is updated• automatically. If there are no event information
data available for channels, EPG will be displayed
with blanks.
OK (Options): Displaysprogrammeoptions including
“Select Channel” option.
INFO (Event Details): Displays the programmes in
detail.
Green button: Programme schedule will be listed
Yellow button: Display EPG data in accordane with
timeline schedule
Blue button (Filter): Views filtering options.
Red button (Prev Time Slice): Displays the
programmes of previous time slice.
Green button (Next Time Slice): Displays the
programmes of the next time slice.
Yellow button (Prev Day): Displays the programmes
of previous day.
Blue button (Next day): Displays the programmes
of the next day.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
OK (Options): Displaysprogrammeoptions including
“Select Channel” option.
Text button (Filter): Views filtering options.
INFO (Details): Displays the programmes in detail.
Red button (Prev Day): Displays the programmes
of previous day.
Green button (Next day): Displays the programmes
of the next day.
Yellow button (Zoom): Expands programme
information.
Blue button (Filter): Views filtering options.
INFO (Details): Displays the programmes in detail.
Numeric buttons (Jump): Jumps to the preferred
channel directly via numeric buttons.
OK (Options): Displaysprogrammeoptions including
“Select Channel” option.
Text (Search): Displays “Guide Search” menu.
SUBTTL: Press SUBTITLE button to view Select
Genre menu. Using this feature, you can search the
programme guide database in accordance with the
genre. Info available in the programme guide will
be searched and results matching your criteria will
be listed.
(Now) : Shows the current programme.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 12A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 12 17.03.2011 15:58:1917.03.2011 15:58:19

English - 13 -
First Time Installation
IMPORTANT: Ensure that the aerial or cable is
connected and a Common Interface module is not
inserted before switching on the TV for the first
time installation.
WhentheTVisoperated forthe firsttime,installation• wizard will guide you through the process. First,
language selection screen will be displayed:
Use “• ” or “ ” buttons to select your language
and press OK button to set selected language and
continue.
Afterselectingthe language,“• Welcome!”screen will
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.
By pressing “• ” or “ ” button, select the country
you want to set and press “ ” button to highlight
Teletext Language option. Use “ ” or “ ” button
to select desired Teletext Language.
Press “• ” button after setting Teletext Language
option. Scan Encrypted will be then highlighted.
You can set Scan Encrypted as Yes if you want to
scan coded stations.Afterwards select the desired
Teletext Language.
Press• OK button on the remote control to continue
and the following message will be displayed on the
screen:
Toselectthe “Yes” or “No”option,highlight theitemby
using “ ” or “ ” buttons and press OK button.
Afterwards, the following OSD will be displayed on
the screen:
If you select CABLE option, the following screen will
be displayed:
You canselectfrequency rangesfromthisscreen. For
highlighting lines you see, use “ ” or “ ” button.You
can enter the frequency range manually by using the
numeric buttons on the remote control. Set Start and
Stop Frequency as desired by using numeric buttons
ontheremote control.Afterthis operation, youcanset
Search Step as 8000 KHz or 1000 KHz. If you select
1000 KHz, the Tv will perform search process in a
detailed way. Searching duration will thus increase
accordingly. When finished, press OK button to start
automatic search.
If you select AERIAL option from the Search Type
screen, the television will search for digital terrestrial
TV broadcasts.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 13A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 13 17.03.2011 15:58:1917.03.2011 15:58:19

English - 14 -
Note:Youcan press• “MENU” buttontocancel.After
all the available stations are stored, Channel List
will be displayed on the screen. If you like the sort
channels, according to the LCN,please select “Yes”
and than press “OK”.
Press• OK button to quit channel list and watch TV.
Installation
Press “MENU” button on the remote control and
select Installation by using “ ” or “ ” button. Press
OK button and the following menu screen will be
displayed.
SelectAutomaticChannelScan (Retune) byusing“
”/“ ”buttonand press OK button.AutomaticChannel
Scan (Retune) options will be displayed. You can
select options by using “ ”/“ ” and OK buttons.
Auto Channel Scan (Retune) Menu
Operation
Digital Aerial: Searches and stores aerial DVB
stations.
Digital Cable: Searches and stores cable DVB
stations.
Analogue: Searches and stores analogue stations.
DigitalAerial &Analogue: Searchesandstores both
analogue and aerial DVB stations.
Digital Cable &Analogue: Searchesandstores both
analogue and cable DVB stations.
Whenever you select an automatic search type and• press OK button, a confirmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using .“ ” or “ ” and
OK button.
After auto channel scan type is set and selected• and confirmed, installation process will start and
progressbarwill movealong.Press “MENU” button
to cancel process. In such a case, located channels
are not stored.
Manual Tuning
HINT: This feature can be used for direct broadcast
entry.
Select• Manual Channel Scan from the Installation
menu by using “ ”/“ ” and OK buttons. Manual
Scan options screen will be displayed.
Select the desired• Search Type using “ ” or “
” button. Manual search options will change
accordingly.Use “ ”/“ ” buttontohighlightan item
and then press “ ” or “ ” button to set an option.
You can press “MENU” button to cancel.
Digital Aerial Manual Search
In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplexorfrequencyare searched for thechannels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.
Digital Cable Manual Search
In cable manual scan, you can enter frequency,
modulation, symbol rate and network channel scan
options. After selecting search type as Digital Cable,
you can set the desired options and press OK button
to search.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 14A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 14 17.03.2011 15:58:2017.03.2011 15:58:20

English - 15 -
Analogue Manual Search
After selecting search type as analogue, you can use
“”/“ ” button to highlight an item and then press “
” or “ ” button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Analogue Fine Tune
Select• Analogue Fine Tune from the Installation
menubyusing “ ”or “ ” andOK buttons.Analogue
fine tune screen will be displayed. Analogue Fine
Tune feature will not be available if there are no
analog channels, digital channels and external
sources stored.
Press• OK button to proceed. Use “ ” or “ ” button
to set Fine Tune. When finished, press OK button
again.
Network Channel Scan
Select Network Channel Scan from the installation
menu by using “ ” or “ ” and OK buttons. Network
Channel Scan selection screen will be displayed.
Select Digital Aerial or Digital Cable and press
OK button to continue. The following message will
be asked. Select Yes to continue or select No to
cancel.
If you start Digital Aerial scan process, automatic
scanning will start. You can press “MENU” button
to cancel.
If you start Digital Cable scan process, the following
screen will be displayed.
You canselectfrequency rangesfromthisscreen. For
highlighting lines you see, use “ ” or “ ” button.You
can enter the frequency range manually by using the
numeric buttons on the remote control. Set Start and
Stop Frequency as desired by using numeric buttons
ontheremote control.Afterthis operation, youcanset
Search Step as 8000 KHz or 1000 KHz. If you select
1000 KHz, the Tv will perform search process in a
detailed way. Searching duration will thus increase
accordingly. When finished, press OK button to start
automaticsearch.Automatic searching screen willbe
displayed during the process.
Note: If you select an extended gap between Start
and Stop frequency rate, automatic search duration
will take a longer time.
Clear Service List (*)
(*)Thissettingis visible onlywhentheCountry option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press “
” or “ ” button to select Clear Service List and then
press OK. The following OSD will be displayed on
the screen:
Select YES and press OK to continue or select NO
and press OK button to cancel.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 15A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 15 17.03.2011 15:58:2117.03.2011 15:58:21

English - 16 -
Managing Stations: Channel
List
The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.
Press• “MENU” button to view main menu. Select
Channel List item by using “ ” or “ ” button. Press
OK to view menu contents.
Select Edit Channel List to manage all stored
channels. Use “ ” or “ ” and OK buttons to select
Edit Channel List.
Operating the Channel List
Press “• ” or “ ” button to select the channel that
will be processed. Press “ ” or “ ” button to select
a function on Channel List menu.
Use• P+/P- buttons to move page up or down.
Press• BLUE button to view filtering options.
Press• “MENU” button to exit.
Moving a Channel
Firstselectthe desired channel. SelectMoveoption• in the channel list and press OK button.
Edit Number screen will be displayed. Enter the• desired channel number by using the numeric
buttonsonthe remotecontrol.If there isapreviously
stored channel on that number, a warning screen
willbedisplayed.Select Yes ifyouwantto move the
channel and press OK.
Press• OK button to process. Selected channel is
now moved.
Deleting a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag channel.
Selectthechannel thatyouwant todeleteand select• Delete option. Press OK button to continue.
Awarning screen will appear. Select• YES to delete,
select No to cancel. Press OK button to continue.
Renaming a Channel
Select the channel that you want to rename and• select Edit Name option. Press OK button to
continue.
Pressing “• ” or “ ” button moves to the previous/
next character. Pressing “ ” or “ ” button toggles
the current character, i.e., ‘b’character becomes ‘a’
by “ ” and ‘c’ by “ ”. Pressing the numeric buttons
‘0...9’ replaces the highlighted character with the
characters printed above the button one by one as
the button is pressed.
When finished, press• OK button to save. Press
“MENU” to cancel.
Locking a Channel
You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag a single
channel.
Select the channel that you want to lock and select• Lock option. Press OK button to continue.
You will be asked to enter parental control PIN.• Default PIN is set as 0000. Enter the PIN number.
Press• OK button when the desired channel is
highlightedtolock/unlockthe channel. Lock symbol
will be displayed next to the selected channel.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 16A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 16 17.03.2011 15:58:2217.03.2011 15:58:22

English - 17 -
Managing Stations: Favourites
You can create a list of favourite programmes.
Press• “MENU” button to view main menu. Select
Channel List item by using “ ” or “ ” button. Press
OK to view menu contents.
Select• Favourites to manage favourite list. Use “
”/“ ” and OK buttons to select Favourites.
You can set various channels as favourites so that• only the favourite channels are navigated.
Select a channel by using “• ” or “ ” button. Press
OK buttontoaddselected channel to favouriteslist.
Press OK button again to remove.
Button Functions
OK• : Add/remove a station.
YELLOW• : Tag/untag a channel.
GREEN• : Tag/untag all channels.
BLUE• : Displays filtering options.
Managing Stations: Sorting
Channel List
You can select broadcasts to be listed in the channel
list.To displayspecifictypes of broadcast,youshould
use Active channel list setting.
Select Active channel list from the Channel list
menu by using “ ” or “ ” button. Press OK button
to continue.
You can select a broadcast type option from the list
by using “ ” /“ ” and OK buttons.
On-Screen Information
You can press “INFO” button to display on-screen
information. Details of the station and current
programme will be displayed on the information
banner.
The information banner gives information on the
channel selected and the programmes on it. The
name of the channel is displayed, along with its
channel list number. Hint: Not all channels broadcast
the programme data. If the name and time of the
programmearenot available,theninformation banner
will be displayed with blanks.
If the selected channel is locked, you must enter the
correct four-digit numeric code to view the channel
(default code is 0000). “Enter PIN” will be displayed
on the screen in such a case:
Media Playback Using Media
Browser
If the USB stick is not recognized after power off/on
or First Time Installation, first, plug the USB device
out and power off/on the TV set. Plug the USB device
in again.
To display Media Browser window, press either
“MENU” buttononthe remote controlandthen select
Media Browser by pressing “ ” or “ ” button. Press
OK button to continue. Media Browser menu options
will be displayed.
Also, when you plug USB devices, media browser
screen will be displayed automatically:
You can play music, picture and video files from the
connected USB memory stick. Use “ ” or “ ” button
to select Videos, Photos, Music or Settings.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 17A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 17 17.03.2011 15:58:2317.03.2011 15:58:23

English - 18 -
Viewing Videos via USB
When you select Videos from the main options,
available video files will be filtered and listed on this
screen.You canuse“ ” or“ ” buttontoselect avideo
file and press OK button to play a video. If you select
a subtitle file and press OK button, you can select or
deselect that subtitle file. The following menu will be
displayed while playing a video file:
Jump (Numeric buttons): The TV will jump to the
file starting with the letter you input via the numeric
buttons on your remote control.
Play This (OK button):Plays the selected file.
Play (GREEN button): Plays all media files starting
with the selected one.
Lang (Play Preview):Displaysselected fileinasmall
preview screen.
INFO: Changes filter options.
FAV: Sorts files by name.
Play ( button): Starts the video playback.
Stop ( button): Stops the video playback.
Pause ( button): Pause the video playback.
Rewind ( button): Goes backward.
Forward ( button): Goes forward.
Subtitle/Audio (LANG. button): Sets subtitle/Audio.
Yellow: Opens subtitle time correction menu
Press RETURN button to switch back to previous
menu.
Viewing Photos via USB
When you select Photos from the main options,
available image files will be filtered and listed on this
screen.
Jump (Numeric buttons):Jumptoselected file using
the numeric buttons.
OK: Views the selected picture in full screen.
Slideshow ( button): Starts the slideshow using
all images.
GREEN button: Views images in thumbnails.
RED button: Sorts files by date.
YELLOW button: Toggles viewing style.
BLUE button: Changes media type.
Slideshow Options
Pause ( button): Pauses the slideshow.
Continue ( button): Continues the slideshow.
Loop/Shuffle(GREEN button):Press onceto disable
Loop. Press again to disable both Loop and Shuffle.
Press once more to enable only Shuffle. Press again
to enable all. You can follow the disabled functions
with the change of the icons.
Previous/Next (Left/Right buttons): Jumps to
previous or next file on slideshow.
Rotate (Up/Down buttons):Rotatesthe image using
up/down buttons.
RETURN: Back to file list.
INFO: Displays help screen.
Playing Music via USB
When you select Music from the main options,
available audio files will be filtered and listed on this
screen.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 18A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 18 17.03.2011 15:58:2417.03.2011 15:58:24

English - 19 -
0..9 (Numeric buttons): The TV will jump to the
file starting with the letter you input via the numeric
buttons on your remote control.
Play This (OK button): Plays the selected file.
Play ( button): Plays all media files starting with
the selected one.
Stop ( button): Stops playback.
Pause ( button): Pauses the selected playback.
Previous/Next (Left/Right buttons): Jumps to
previous or next file to play.
FAV: Sorts files by Title,Artist orAlbum..
Note: If the Viewing Style is set to Folder in Media
Browser Settings, Music folder will be displayed as
sorted and there is no need to sort files again by
pressing FAV button.
INFO: Changes filter options.
Loop/Shuffle (Blue button): Press once to disable
Loop. Press again to disable both Loop and Shuffle.
Press once more to enable only Shuffle. Press again
to enable all. You can follow the disabled functions
with the change of the icons.
Media Browser Settings
You can set your Media Browser preferences by
using the Settings dialog. Press “ ” or “ ” button to
highlight an item and use “ ” or “ ” button to set.
View Style:Sets default browsing mode.
Slide Show Interval:Sets slide show interval time.
Show Subtitle: Sets subtitle enabling preference.
Subtitle Language:Sets supported subtitle
language.
Subtitle Position:Sets subtitle position as up or
down.
Subtitle Font Size: Sets subtitle font size (max.
54pt).
Changing Image Size: Picture
Formats
You can change the aspect ratio (image size) of• the TV for viewing the picture in different zoom
modes.
Press• “SCREEN” button repeatedly to change
the image size. Available zoom modes are listed
below.
Auto
WhenAUTO isselected, the aspectratioof thescreen
isadjustedby theinformation provided bythe selected
source(if available).
The format being displayed in AUTO mode is
completely independent of WSS information which
couldbeincluded in the broadcastsignalor the signal
from an external device.
Note:Automodeonly willbe availableinHDMI,YPbPr
and DTV sources.
16:9
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the wide TV
screen.
For 16:9 aspect ratio pictures that have been• squeezed into a normal picture (4:3 aspect ratio),
use the 16:9 mode to restore the picture to its
original shape.
Subtitle
This zooms up the wide picture (16:9 aspect ratio)
with subtitles to the full screen.
Note: You can shift to screen up or down by pressing
“” / “ ” buttons while picture zoom is selected as
panaromic, 14:9 Zoom, Cinema or Subtitle.
14:9
This zooms up the wide picture (14:9 aspect ratio) to
the upper and lower limits of the screen.
A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 19A01_MB60_[GB]_(01-TV)_5110UK_IDTV_TC_BRONZE17_22905WLED_woypbpr_MOBIL_10072162_50184228.indd 19 17.03.2011 15:58:2517.03.2011 15:58:25