Firefield SPARTAN FF24122WP User manual

USER MANUAL
Spartain Night Vision
Monocular/Goggles
®
FF24122WP/FF24125/FF24127
*FF24125 shown

www.re-eld.com
Engineered for high intensity, fast-paced situations, from paintball games to tactical training simulations to home
defense, Fireeld products are designed for the next generation shooter and serious gun enthusiast. Our goal
is to provide optimal solutions for demanding tactical, hunting and competitive training situations.
Fireeld products are tested for durability in extreme terrain and extreme climates. Consisting of shooting
accessories compatible with extreme shooting guns, AR-15s, tactical carbines, air guns, shotguns and pistols,
the Fireeld product line includes: riescopes, red dot sights, reex sights, laser sights, magniers, bore sights,
night vision, digital night vision, ashlights, spotting scopes, rails and mounts.
Delivering high quality and exceptional durability to every intense moment, Fireeld is the key to victory.
Transform fear to power, panic to excitement and chaos to glory with Fireeld units—Victory Justies
Everything®
To view this manual in other languages, or for more information
please visit www.re-eld.com.
®
© Sellmark Corporation, all rights reserved
VICTORY JUSTIFIES EVERYTHING®
Manufactured by
Sellmark Corporation
2201 Heritage Parkway
Manseld, TX 76063

Fireeld Spartain
Fireeld Spartan is a new line of night vision monoculars that includes a number of models.
Fireeld Spartan is designed for observation in twilight or complete darkness. This is a passive type
device, i.e. it does not require articial light, however the new high power IR Illuminator enhances
signicantly the picture quality. The device can also accommodate accessories like IR Flashlights.
Fireeld Spartan is equipped with two 1⁄4 inch tripod mounts that allow xing the monocular onto a
head mount and use as goggles. This device features excellent ergonomics, compact dimensions and
handy controls.
The entire unit is rugged enough for extreme eld conditions but damage may occur if the scope
is mishandled. The Fireeld Spartan is entirely self-contained and can operate for up to 20 hours
on a single CR123A battery. Your Fireeld Spartan scope is ideal for a variety of professional and
recreational uses.
1
INCLUDED:
•Carrying case
•User manual
•Cleaning cloth
•Headmount -
(FF24125)
FEATURES:
•High quality gen 1 image and
resolution
•Built-in, high power IR illumination
•Ergonomic design
•Lightweight and durable
•1/4” socket for tripod
mounting
•40 hour battery life
(without IR)

2
DIAGRAM
1) Lens cap (attaches to side of unit)
2) IR button
3) On button
4) Eyepiece
5) Objective lens
4
5
1
2
3

3
TECHNICAL SPECIFICATIONS
*Max detection range of an object measuring 1.7x0.5m in natural night conditions (0.05 lux, quarter moon)
SPECIFICATIONS FF24125 FF24122WP FF24127
Generation 1 1 1
Visual Magnication, x 1 3 4
Objective Lens, mm 24 42 50
Resolution, lines/mm 36 36 36
Angular eld of view, degree 30 20 15
Max detection range*, m 80 150 180
Eyepiece adjustment, dptr ±4 ±4 ±4
Operating voltage, V 3(1xCR123A) 3(1xCR123A) 3(1xCR123A)
Tripod mount, in 1/4 1/4 1/4
Operating time (IR on), hour 20 20 20
Degree of Protection, IP code
(acc. to IEC 60529)
n/a IPX6/IPX7 n/a
Operating temperature -30°C to +40°C -22°F to +104°F
Length, mm/in 142/5.6 162/6.4 191/7.5
Width, mm/in 60/2.4 60/2.4 87/3.4
Height, mm/in 82/3.2 82/3.2 60/2.4
Weight, kg/oz 0.38/13.4 0.5/17.6 0.6/21

4
WARNINGS AND PRECAUTIONS
Your Fireeld Spartan night vision scope was designed to provide many years of reliable service.
To ensure that you get the most enjoyment out of your Fireeld Spartan always obey the following
Warnings and Precautions:
• Do not direct a unit in the “on” position at intense sources of light, such as car’s headlights or
burning re. This may disable the unit for an unknown length of time or cause a dark spot in the
center of the eld of view. Do not turn the unit on in daylight without the protective cap rmly
secured over the objective lens, as this may damage the unit. Any such damage may void your
warranty. Never leave the unit in the “on” position over an extended length of time in an area with
a light level exceeding 1-10 lux (twilight - 10 lux, deep twilight - 1 lux). Please keep the protective
cap on the objective under greater
• light level.
• Your Fireeld Spartan was designed to be self-contained. Do not open the body of the scope or
otherwise attempt to service this device. If such need arises return the unit for replacement or
repair.
• The replacement of eyepiece and objective lenses in the FF24122WP model is prohibited: this
• may cause depressurization of the device.
• Keep the Fireeld Spartan away from dust, moisture and sudden temperature drop.
• Do not subject the unit to water drops and splashes, do not put water reservoirs on the device.

5
• Avoid dropping or otherwise shocking the unit. Fireeld Spartan incorporates a
sophisticated optical system which could be damaged in extreme cases of misuse.
Damage to this device from failure to ob-
serve these warnings may void the Fireeld
Spartan ‘s warranty!
BATTERY INSTALLATION
Your Fireeld Spartan runs on a single CR123A battery. To install, unscrew the battery compartment
cover, insert the battery into the battery compartment observing the marking on the cover of the
battery compartment, replace the battery cover carefully. Do not overtighten.
USE AND TESTING
Make sure the battery has been installed according to instructions found in the battery installation
section of this manual.
• If you wish to test your night vision device in a lighted area, be sure the lens cap is in place prior
to pressing the “ON” button. The lens cap has a pinhole opening to admit a small amount of light
for testing purposes.

6
• Move into a dark area before activating the Fireeld Spartan light amplier.
• Remove the lens cap (1) and fasten it to the body as shown in the picture.
• Activate the device by pushing the “ON” button (3).
• If the subject is to be viewed in a completely dark area, including lowlight shadow areas, activate
the infrared illuminator by pressing the “IR” Button (2) located next to the “ON” button.
• Direct the turned on unit at an object at a distance of around 30m. Rotating the eyepiece (4), focus
on the tube’s screen — rough surface or tiny dark dots are visible. Rotate the objective lens (5)
until the image quality is optimal. Re-focus the eyepiece, if necessary. After this adjustment you may
not rotate the eyepiece irrespective of the distance and objective lens.
• Direct your Fireeld Spartan at an object to be viewed and adjust the nal focus by rotating the
objective lens focusing ring until the image is optimal. When screwing the objective lens into the
housing, it focuses on farther objects, when screwing out - on closer ones.
• When you are nished using your Fireeld Spartan put the cap back on the objective lens, turn
off the unit and put
• it into the carrying case.
• Push of the “ON” button when the IR is on will make both green and red LEDs go out (IR will
be off as well).

7
CAUTION
Your Fireeld Spartan can be used in extreme cold. However, when the unit is brought back into a warm
environment, you MUST wait approximately 2-3 HOURS before using the unit again. Failure to do so
may result in damage as a result of condensation accumulating on the internal circuitry of the unit.
COMPACT HEAD MOUNT INSTRUCTIONS
* Included with FF24125
The Compact Head Mount allows hands-free operation of the night vision device in partial and complete
darkness. The Head Mount ensures stable positioning of a night vision device in front of the user’s eyes,
even while in fast motion (pacing, running, abrupt movements). The Head Mount is simple and convenient
to use. All adjustments, such as 90° raise of the unit, set the night vision device’s position in the “forward-
backward” and “right-left” directions relative to the eyes are made by one hand.

8
OPERATION
1. Adjust the size of the mask to t your head using the straps. The mount must closely t your head.
2. Afx the night vision device to the adapter (2) using the screw (1) (or two screws - depending on the
adapter).
3. To adjust the position of the unit relative to the eyes, loosen the knobs (3), (4) and move the unit
longitudinally, upwards and downwards adjusting its inclination angle. As you nd the most comfortable
1) Mounting screw
2) Adapter plate
3) Horizontal adjustment knob
4) Vertical adjustment knob
5) Release Button
45
1
2
3
HEAD MOUNT DIAGRAM

9
MAINTENANCE
• Clean the lens with professional lens cleaning supplies intended for use with multicoated optics.
• Blow any dust or dirt off the lenses using dry, compressed air.
• Clean the Fireeld Spartan housing with a soft, clean cloth coated in some synthetic cleaning
means.
STORAGE
Always store the Fireeld Spartan in its case in a dry well-ventilated and well-heated room away
from heating/air conditioning vents. Remove the battery if the device is to be stored longer than 2
months.
position tighten the knobs (3), (4) to x the setting.
4. To watch objects without the unit, place the unit vertically by pressing and holding the button (5).
5. When you are nished using the unit, remove the night vision device from the head mount by simply
unfastening the screws (1).
STORAGE
Always store the Head Mount in its case in a dry well-ventilated and well-heated room away from
heating/air conditioning vents.

10
TROUBLESHOOTING
The scope will not turn on...
Check that the battery is installed properly. Install the battery according to the (+) and (-) polarity,
ensuring that the markings on the battery and battery compartment correspond with one another.
Check the battery contact to ensure it is clean and free of corrosion; if necessary, clean the contact.
Make sure that the external contact lug is not bent.
If necessary, replace the battery as it may be depleted. Also, be sure that the power is in the “ON”
position when trying to turn on the scope.
Distinct black dots appear on the screen...
These dots are minor cosmetic blemishes resulting from tube production processes and do not
interfere with the reliability or performance of the scope.
The scope ickers, ashes or “snows”...
The scope may icker or ash when used in a bright environment; to correct this, place the cap over
the objective lens and enter a dark environment. The scope will restore itself to a natural functioning
state in several minutes or hours, depending on how long the scope had been exposed to the light.
The scope may icker for the rst several seconds of use, even when in a dark environment, before
the scope corrects itself and functions properly.

11
The scope may “snow” for several minutes after being exposed to a bright light source (daylight, a
car’s headlights, re, etc.) even if being operated in complete darkness.
The image is not focused...
Adjust the focus of the eyepiece and the objective (see Use and Testing). Check that the lenses are
not foggy or dusty; if they are, carefully clean the external surfaces of lenses with a soft cotton fabric.
Replace the battery if the total battery charge is less than 2.0 V.
When the unit is brought into a warm environment from a cold one, condensation may appear on
the internal lenses; you must wait two hours before using the unit.
Visibility decreases or disappears...
Bright light sources, such as headlights, may cause visibility to decrease or disappear and the image to
icker. Turn the power off and turn the scope away from the light source; visibility will restore itself
in several minutes.
FIREFIELD WARRANTY
Please visit www.re-eld.com for warranty details and information.

www.re-eld.com