Fisher & Paykel DW60FC1 User manual

Make sure the installer has removed all packaging and
completed the ‘Final checklist’ in the Installation instructions.
AB
E
F
GHI
K
J
CD
Keylock
● Keylock disables all the buttons so
that a wash cannot accidentally be
started.
● Keylock can be activated or canceled
at any stage, including while a wash
programme is running.
To activate:
Press and hold and together
for a second until you hear a beep.
The keylock indicator will come
on and remain lit until keylock is
canceled.
To cancel:
Press and hold and together
for four seconds until you hear a
beep. The keylock indicator will flash
and then go out.
Wash program indicators
These show which programme is
selected.
Display
This shows:
- the time remaining (minutes)
- the delay start time (hours)
- Fault code numbers
(see section ‘If there is a fault code’)
Wash progress indicators
Shows the stage of the wash cycle
currently in progress.
Keylock indicator
If lit: keylock is activated.
Rinse aid indicator
If lit: Rinse aid dispenser requires
filling.
Delay start indicator
If lit: start is delayed.
Off/On
Press to turn the dishwasher on or off.
Wash programme selector
Press to scroll through the wash
programmes.
Delay start
Press to enter delay start.
(See ‘Setting delay start’)
Start
Press to start the wash.
To pause:
Press again or open door.
PRODUCT OVERVIEW
CONTROLS OVERVIEW
Controls Description
Upper basket
Lower basket
Door seal
Detergent
and rinse aid
dispensers
Centre spray arm
Upper spray head
Lower spray arm
Filters
A
EG
H
J
K
I
F
B
C
D
For detailed information on the
features of your dishwasher
For warranty information
If you…
● have any questions or comments
● need a Fisher & Paykel authorized
technician to service your product
● need replacement parts or accessories
● want to register your product
see your ‘User guide’
see your ‘Service and warranty’ booklet
see your ‘Service and warranty’ booklet or contact us
NZ toll-free, 24/7 0800 372 273
AU toll-free, 24/7 1300 650 590
www.fisherpaykel.com
USING YOUR DISHWASHER – QUICK REFERENCE
continued >
1Discard food scraps and load dishes
carefully
● Scrape large food particles off (e.g.
bones, fruit stones) and remove any
foreign objects (e.g. toothpicks, strings,
paper).
● To help with wash performance, arrange
dishes so they are evenly spaced and
not nesting.
For more detail, see user guide:
‘Caring for your dinnerware’
‘Loading’
Starting a wash
2Add detergent
● Fill the detergent dispenser with
powdered detergent and close the
dispenser door or place a dishwasher
tablet in the cutlery basket.
For more detail, see user guide:
‘Water hardness and dishwashing’
‘Wash programmes and detergent
quantities’
‘Adding detergent’
3Turn power on
(also check water is turned on)
For more detail, see user guide:
‘Controls and starting a wash’
4Check rinse aid level, refill if necessary
● If the rinse aid level is low, the rinse aid
indicator on the display will light up.
● Press the button to snap the
dispenser cover open
● Pour rinse aid into the circular
opening (up to the MAX marking)
● Wipe up any spills and click shut the
cover.
For more detail, see user guide:
‘Using rinse aid’
7Start wash
● Press to start the wash programme
OR set Delay start
● Press to enter delay start. Press
again to increase the time (in hours).
For more detail, see user guide:
‘Setting Delay start’
To cancel a wash once it has started
● Press to cancel the programme.
--- will show in the display, then the
wash progress indicators will go out and
the display will turn off.
● If you wish, you can start a different
programme.
Note: you may need to refill the
detergent dispenser.
To pause and restart a wash
programme
● Press to pause the programme.
● The programme status (eg Wash) will
flash while the dishwasher is paused.
Open the door very slowly.
IMPORTANT!
There is a risk of being sprayed with
hot water. Do not fully open the door
until the spray arms have stopped
rotating.
● Load, remove, or rearrange any dishes
if needed.
● Press to restart the programme.
If the dishwasher is not restarted
within 7 minutes, it will then beep
until the cycle is restarted.
After the wash has ended
8The dishwasher will beep. The display
will show 0. After 30 seconds the
display will turn off.
9Open the door slightly and leave ajar to
help drying. Once cooled, unload dishes
carefully
For more detail, see user guide:
‘After the wash’
● Check condition of dishwasher, clean if
necessary
5Check that nothing obstructs the spray
arms, then close the door firmly
6Select wash programme
● Press to scroll through the wash
programmes.
Rinse aid level indicator
Spray arm
Auto Senses the optimal wash programme for
your dishes
Normal
(Default)
Dishes with normal soils for optimum
wash and dry performance
Normal
Eco
Dishes with normal soils for optimum
energy and water usage
Fast A fast wash for lightly soiled dishes
Heavy Heavily soiled pots, pans and dishes
Rinse Prevents odours and soils from drying
on dishes
rned on)
n
se a
id
l
eve
l
i
n
di
ca
to
Serial label
NZ AU
DISHWASHER - DW60FC1 MODELS
QUICK START GUIDE

Utensil tray
Removable
anti-nesting grid
CUTLERY BASKET
Removable anti-nesting grid
● The anti-nesting grid clips onto the top
of the cutlery basket.
● Use the grid to separate cutlery items
and stop them nesting together.
Loading
● To reduce the risk of injury, we
recommend loading knives and sharp
utensils with handles facing up.
● Mix spoons, knives and forks within
each section to stop cutlery nesting
together and to ensure the water
circulates freely. Alternatively, use
the clip-on anti-nesting grids to keep
cutlery items apart.
● Keep stainless steel from touching
silver cutlery to avoid staining.
LOWER BASKET
Fixed tine racks
● Use the lower basket for your largest dishes:
pots, pans, lids, serving dishes and bowls.
● Ensure dishware items do not block the spray
arm above from rotating.
● Place larger plates between the longer tines to
maximise stability.
● The tine spacing has been optimized for
maximum wash performance of plates and
bowls.
● If you need more height for tall items, you can
raise the upper basket.
See instructions opposite.
Fixed tine
plate rack
Adjusting the height of the Upper Basket
IMPORTANT!
Before you adjust its height, make sure the basket is empty.
1Turn the front safety stops on either side outwards.
2Slide the empty basket out of the runners.
3Reinsert the higher or lower set of rollers in the runners and slide the
basket all the way back in.
4Turn the front safety stops inwards.
UPPER BASKET
● The upper basket is designed to hold items like glasses, cups, saucers,
plates, small bowls and shallow pans.
● You can adjust the height of the upper basket to create more space for tall
items in the lower basket. See instructions below.
Utensil tray
● Use the utensil tray to securely hold long or sharp items like knives,
chopsticks, or ladles. Ensure that knife blades are facing down and that
lightweight items are weighted down.
● Slide or remove the utensil tray if you need the space for other items
below.
Fixed tine plate rack
● Use the fixed tine plate rack to support saucers, small plates
and bowls.
● The tine spacing has been optimized for maximum wash performance of
plates and bowls.
● The fixed tine plate rack is not removable.
Foldaway Cup Racks
● Use the cup racks to support mugs, cups and
glassware, and to secure large utensils and knives.
● Fold the racks away if you need to make space for
taller items.
You can adjust these independently of each other:
1Fold the racks up if you need the space.
3Fold down to lock in position.
Stemware notches
These notches help
support long-stemmed
glassware.
Fold up to make room for items below
Slide or remove the utensil tray if you
need the space for other items below.
Ensure the utensil tray is hooked
correctly onto the upper basket
Front safety stop
Rollers
591225 B / 0120501370 10.17