Fisher & Paykel RX256 Mounting instructions

£spahoi P_g 49 _ 95

Introduction
Safety and warnings
Installation instructions
Before use
Temperature controls
RX256DT7X1
RX256DT4X1/RX216DT4X1
Fresh food features
Freezer features
Ice and water
Water filter
Food storage tips
Care and cleaning
Operating sounds
Warranty and service
2
3
5
11
12
16
17
20
21
25
29
32
37
38
45
SAVE THESEINSTRUCTIONS
7h_:,modelsshovvr_ir_thisI)serO;ick_mcJyr_otbec;vc;ilc;bl,<_in _11mc;r_elsc;r_c]c_re
subjed rochonge _: mr_yime.fbr currec_tdelcXDc_boutmodalcod pmdi_cotior7
c_vcXIc_bilityinyour country,plt_osevisitourIocol websit_.,list_.don thebook cover
or contractyourIocc;Ifisher DPc_ykdcJ'_,t_le_

Thank you for buying a Fisher& Paykd side by side refrigerator with chilled water and
ice dispensing through the door,
This refrigerator combines size and storage space with the latest features and functions, Many
hours have been spent researching how you, our customer, use your refrigerator and what we
can do to make life easier for you,
Select refrigerator models have a number of customizable storage zones, such as a Beverage
Chiller with adjustable temperature settings and a fruit and vegetable bin with adjustable
humidity.
Select models also have some special modes, such as Vacation Mode that will help you save
energy, and Speed Ice that will increase ice production.
As your life changes, so can your refrigerator, This book explains the features and functions, and
will help you get the most out of your refrigerator,
We hope you enioy your new refrigerator!
Fig, 1Sid_ kS/sid_ refrigerotor
It is irnportent thet this User Guide shoMd be reteined with your £e & Weter refr@eretor for
future reference° Should the eppfience be sold or trensferred to enother owner, pleese ensure
thet the User Guide is te# with the epplienCeo This wilt ensure thet the new owner cen femilierize
thernsdves with the informetion end wernings conteined within the Guide.

Safety and warnings
Electdc Shock Hazard
Read and follow the SAFETYAND WARNINGSoutlined in this User Guide
before operating this app[ianceo
Failure to do so can result in death, electric shock fire or injury to persons°
Use this appliance only for its intended purpose as described in this User Guide.
When using this appliance always exerdse bas£ safety precautions including the foflowing:
This appJiance is not intended for use by @fldren or infirmed persons without supervision. This is
espedal_y important when using the freezer compartment. Young children should be supervised
to ensure they do not ptay with the appliance.
Risk of chitd entrapment. Before you throw away your oM refrigerator or freezen
-Take off the doors
-Leave the shek_es in place so that children can not easity climb inside.
The plastic packaging may be achoking or suffocation hazard to children. Ensure all plastic is
disposed of properly.
Extreme care must be taken when disposing of your old appliance to avoid hazards. The
refroerant gas must be safdy removed and for the safety of young children, remove doors.
Xour Fisher &Paykel Appliances Authorized Service Center wifl be abte to give advice on
environmentaNy friendly methods of disposing of your old refroerator or freezer
Electrical
This appJiance must be properly instafled in accordance with the installation instructions before
it is used.
Never unplug your refrigerator or freezer by putting on the power cord,
AIwa}t; gro the ptug firmly and puN straoht out from the ouflet socket.
Oo not plug in any other appHance at the same power point outtet socket as your refroerator is
using. Do not use extension cords or doubte adapters with these products.

Safety and warnings
Repair or replace immediately all electric service cords that have become frayed or otherwise
damaged, Do not use acord that shows cracks or abrasion along its tength or at either the plug
or appliance end,
If the power supply cord L5damaged, it must only be replaced by your Fisher & Payket Appliances
Authorized Service Center because special purpose tools are required.
When moving your appliance away from the watl, be careful not to roll over or damage the power
cord.
Unplug your refrigerator before cleaning it or repladng the interior light bulb.
Storing food and drinks
Never store volatile or flammable materiaL_ in your refrigerator or freezer as they may explode.
Never freeze tiquids in glass containers. Liquid expands during freezing, which may cause the
container to exptode.
Never freeze carbonated drinks. They may explode.
Do not consume food ff it is too cold, Food removed from the freezer compartment may be coM
enough to cause damage when brought into contact with bare skin, eg frozen ice cubes.
Power failure - food safety
Do not refreeze frozen foods that have thawed completefyo Follow the recommendations below if
you discover food in your freezer has thawed:
_)Ice crystals still visible -food may be refrozen but should be stored for ashorter period than
recommended.
2) Thawed but refrigerator cold -refreezing generally not recommended, Fruits and some cooked
food can be refrozen but use as soon as possible. Meat, fish, poultry - use immediately or cook
and refreeze. Vegetables -discard as they usually go timp and soggy.
3) Thawed and warmer than 4 _ °F (5 °C) -discard aft foods.
Do not refreeze frozen foods that have thawed completely. The food may be dangerous to eat.
Many commercially available cleaning products contain solvents which may attack plastic
components of your refrigerator or freezer and cause them to crack° Please refer to the Care and
cleaning section of this booklet for further advice.

_nsta_ation instructions
Electdc Shock Hazard
Read and follow the SAFETYAND WARNINGSoutlined in this User'Guide
before operating this appliance, pages 3- 4,
Failure to do so can result in death, e_ectric shock fire or injury to persons°
Location
Do not install refrigerator near an oven, radiator or other heat source. If not possible, shield
refrigerator with cabinet material.
Do not install where temperature faIb below 55° F (13° C) or rises above 110° F (43° C).
Malfunction may occur at these temperatures.
o The refrigerator is designed for indoor household application only.
Measuring the opening
When installing your refrigerator, allow V2"(13 ram) space at thetop and V/'(13 ram) space
behind machine compartment cover (located in the rear) for proper air circulation. If the
refrigerator is placed with the door hinges against a wall, you may want to allow additional space
so the door can be opened wider.
= Subfloor_n_orfloorcoverings/_ecarpet,t_le,woodfloors,ru_s)maymake;,'ouropeningsmaller
than anticipated. _!]'
o Someclearancemaybegainedb;,'usingtheleve,ngprocedureunderLevel_n_,pages.
Im,o to t:
ff_sig_o_o__s_obei_to,e_ i_o o_e_esswhe__he_opo__he_sige_o_o__s_omp/_e_y
Transporting your refrigerator
NEVERtransport refrigerator on its side. If an upright position is not possible, lay refrigerator on
i_sback.Allowrefri_eratortosi_upri_htforappro×ima_ely30minu_esbeforeplu_gin_itinto
ensureoilre_urnstothecompressor.Plu_gingrefri_eratorinimmediatelymaycausedamageto
internalpar_s.
Use an appliance dolly/trolley when moving refrigerator. ALWAYS truck refrigerator from its side i/
or back -NEVER from its front.
Protect the outside finish of the refrigerator during transport by wrapping the cabinet in
blankets or inserting padding between the refrigerator and doll},'.
_ecure refrigerat_rt_ d_[[y_rm[y _ith _trap_ _r bunf_ee c_rds_ Thread straps thr_ugh hand_es
where and when possible. Do not over--tighten. Over--tightening restraints may dent or damage
the outside finish.

nsta ation instructions
Door and hinge remova[
Someinstallations require door removal to get the refrigerator to its final location.
Tools needed:
Phillips screwdriver
%" (9.5ram) hex headdriver
Electdc Shock Hazard
Disconnect power to refrigerator before removing doors° Connect power
only after replacing doors°
Green ground wire must be attached to top hinge while performing door
remova_ and replacement,
Failure to do so may result in death, e_ectric shock, fire, or injury to persons°
To avoid property damag6 observe the fol#owing:
Protect vinyl or other flooring with cardboard, rugs or other protective material prior to moving
the refrigerator,
Tape decorative paneh #ehct modds) securdy in place before removing door handtes,
Do not adjust the refrigerator to be any shorter than 68½" (I 740 ram) taft (minus hinge and cap).
Doing so may damage underside componen%.
'I
2
Unplug power cord from power source.
Removetoe grille (seepage 8).
o Open both doors 180':',or aswide as possible.
Note: for refrigerators in operation, shut off water before removing water line from the door.
To disconnect the water line:
Push in white collar ( a ) and hold.
Pull the dooFside tube from the connector ( b ).
To reconnect the water line:
Firmly push tube _46"(8 ram) into the connector.
Use lines on the tube as a guide for full insertion.
If tube end is damaged, cut off _AG"(8 ram) before
reconnecting.
If leaking occurs, cut and reconnect the line.
Step 2
b

iiilIilIi@_@_@_@_@_@_@_@_@_@_@_@_@_@_@_@_@_@_II i,iliiiIiilliliIiiiilillliiiIiillillillillillillilliliIiiiillillillillillillillillillI¸IIIiiIiillillillillilliliiiiiiiiliiiili
Installation instructions
Closedoors.
Removetop hinge covers by removing
Phillips screws.
Unscrew 546"(8 ram) hex head screwsfrom
top hinges.
Step 4
iiiiiiiiiiii
Step 6
6 Detach main wire connector harness,
Do not remove screw connecting green
ground wire.
To detach main wire harness, use a flat
blade tool or fingernail to press junction
point between two connectors to release.
Step 7
7 Remove top hinges along with doors. J
3
8 Remove bottom hinges witha :Ys"(9.5 ram) Step 8
hexheaddr,vet,
To replace the doors, follow the steps in
doorandh_ngeremova__nreverseorder.
I pon ,t:
i__.,_te_ti_e_be e_ _s_m_e4 _ off

Installation instructions
To protect personal property and refrigerator from damage, observe the foflowing:
Protect vinyl or other flooring with cardboard_ rugs, or other protective material
Do not use power tools when performing levding procedure.
Toenhance the appearance and maintain performance, the refrigerator should be level.
Note:
= Complete any required door reversal, panel installation and/or a water supply connection before
leveling.
Some models only have adjustment front leveling screws ( a ). Step 1
Tools needed;
° %" (9.5 ram) hex head driver
Carpenteds level
1Remove toe grille.
Grasp firmly and pull outward to undip.
Using hex head driver, turn front adjustment screws
( a ) clockwise to raise and counterclockwise to lower
the front of the refrigerator. Steps 2, 3
Select models also have rear adjustment screws
( b ). Using the hex head driver, turn each of these
adjustment screws ( b ) to raise or lower the rear of
the refrigerator. ab ba
Using the carpenter's level, make sure front of refrigerator
is W' (6 ram) or 1/2bubble higher than back of refrigerator
and that the refrigerator is level from side to side.
If required, correct rocking of refrigerator by turning rear
adjustment screw clockwise to raise rocking corner.
If doors are uneven, do the following:
Determine which door needs to be raised.
Turn front roller adjustment screw ( a ) clockwise
to raise front corner of door.
If one refrigerator door has reached the limit of its
adjustment range and doors are still not level,
raise or lower the opposite door by turning roller
adjustment screw clockwise or counterclockwise.
Check with level to verify q" (6 ram) tilt to the back for
proper door closure.
Step 5
&
Fig3 Levelingthe refrigerator
If refrigerator is aligned and stable, replace toe grille and hinge covers.
Align the toe grille mounting dips with the lower cabinet slots.
Push the toe grille firmly until it snaps into place.

iilii+I+IIII+ ilii+iii+liilii+is+iliill¸Iii¸liiiliiliiliiilll¸IiliIii¸IiIii¸IiIii¸IiIii¸II iiiiiiiiiIii¸IiIii¸IiIii¸II;+lliili+I+i+ii!iill!
Installation instru<tions
Con n ecti n g t he wa t e rs u p ply
+codthe+struct+nsbeforeconnection,onddonotor+rantif+structionsorenotunders+od
or_rebeyondpersona/ski//+vet+ i:
/t_srecommended+atanau+on=edlumber+yourstateor++,,nisusedto+staltthev++r
connect+n,+ensurealnocalcod+sandordinancesarefot+_ed+Consulta/umber++nnect
_" (6+35 ram) OD copper tubing to household plumbing to assure compliance with local codes
andcomi+nce+
+= ++,p+ +,++,+,+9= i!
CONn+Mwaterpressuretowatervatv++between+Sand++Opoundspersquareinch,+0 I+iii
poun+persquareinchwithoutliter+ +iilliili!
WAIT two to three hours be+re pladng re#@erator in final position to check and correct any +;!
waterleaks+++check+rleaksa+er+4hours+Waterdama++toanimproperlaterconnection Ii/1+
may cause mold/mildew growth+ Clean up spilts or leakage immediatelyo ++++++II
DolOTusewithwaterthatismicrobiolo+icat+unsafeorofunknown+uati+withoutade+uat+ ii,!
d+in+ctionhe+reorafterthesystem+ i1!!;
DO NOT use a setf pierdn+ or H+'(4+7 ram) saddte valveo Both reduce the water flow, can become ++++++++++
dogged over tim¢ and may cause leaks if repair + attempted+ ++++
DO NOT service ice maker untess spedficat+ recommended in User Guide or published user= ii+i++++....
i
repairinstructions°
CHECK the copper tubing under the sleeve + smooth and #ee from defects+ Do not reuse an old {
sleeve+
Tools needed: ii/
= < l+.3s++1outer+a+eterfIexiUecoppertubin+
Shut-of[ valve (requires a W' (6.35 ram) hole to be drilled into water supply line before valve
attachment).
+ Adjustable wrench (2). i1
+¼"(6.35 ram) hex nut driver, t :
Note:
+ Use copper tubing only for installation. Plastic is less durable and car+ cause damage.
+Add 8' (2440 ram)to tubing length needed to reach water supply for creation of service loop. +++++i]i[!i+
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++....

Installation instructions Step 1
Water connection
Note: ensure refrigerator is not plugged into a power supply.
Create service loop with copper tubing (minimum 2' (610 ram) diameter).
Avoid kinks in the copper tubing when bending the service loop. Do not use
plastic tubing. Step 2
2 Remove plastic cap from water valve inlet port,
S Place brass nut ( a ) and sleeve ( b ) on copper tube end as illustrated.
Reminder: Do not use an old sleeve. The nut and sleeve are provided in the
Use and Care packet,
4 Place end of copper tubing into water valve inlet port. Shape tubing slightly
- do not kink - so that tubing feeds straight into inlet port. Step 3
5 Slide brass nut ( a ) over sleeve ( b ) and screw nut into inlet port,
Place adjustable wrench on nut ( 1 ) attached to plastic waterline and
maintain position. Using second adjustable wrench, turn the lower nut ( 2 )
counterclockwise and fully tighten while holding the upper nut in place.
........................Impor tan t!
Do not over-t@hten. Cro.ssthreading mey occur° Step 5a
/ i i I
5 Pu on tub ng to conf rm connect on s secure Connect tub ng to frame ii [_/_
/i/y;
with water tubing clamp ( _ ) and turn on water supply. Check for leaks and /¢_i b 'iit
I['1{i_i_ a .....correctnecessary.Continuetoobservethewa ersupplyconnectionfor ' ii i!iili
two to three hours prior to moving the refrigerator to its permanent location, i_ _ fiiiiiii/
i / ,4 £(
7 Monitor water connection for 24 hours.
Correct leaks, if necessary. StePi5b
,'ill i
//i Z ._ f
Handle removal //ii 41 1
Handles are installed at the factor],'. /_'//.,;_71,.
//
:%-/,-
Toolsneeded; ii
,%2"(4ram) Allen wrench ii 1,
Step 6
t0 remove: ...... }
oRemovecap-screwfrom handle mounting postusing%£'(4ram)Allen // I:;_
i i _Jr< iJ7i i
wrench / i /i <,.,; ii{t!ii'{
Repeat the procedure on all poststo remove the handle. /',/ // i i
.......i / 7 ¢_ F C
Toreplace: ii7 ii' i
"ANgn handIe with the mounting posts. /// ';
Fully tighten all cap-screws to secure handle in place, il .f:h t"\

Before use
Before you start using your refrigerator
o Check refrigerator is switched on and has been allowed to cool for three to four hours before
loading with food.
Check the water is connected correctly.
Turn icemaker on (see page 23).
Fit filter if desired (see page 25).
Dispense 5 qt (5 L) of water and discard. There may be a 1 minute delay as the tank fills from the
dispenser.
Discard the first 24 hours worth of ice.
Now you can enjoy the ease and simplicity of ice and water being dispensed out the front of
your refrigerator.

] mperature controB (RX256©T7X1)
There are two control panels on your refrigerator, one on the outside of the door and one inside
the fresh food compartment, Temperature is controlled through the panel located at the inside
top of the fresh food compartment,
The temperatures are preset at 38°F (3°C) in the fresh food compartment and 0°F (-18_'C) in the
freezer compartment, After being initially switched on the refrigerator will take several hours to
cool, depending on the environment it is placed in, You can start to store food in it 3 - 4 hours
after it was turned on,
After placing food in the refrigerator, leave it to stabilize for 24 hours, After this time you may
wish to after the temperature. The fresh food and the freezer compartment temperatures are set
individually.
Before any buttons have been pushed, the display shows the current temperature of both
compartments.
The first touch of an A or _ button shows the current temperature setting in that
compartment
Further touches of the A or _ button will change the temperature setting in 1°F increments.
The display will show the new setting for three seconds, and then return to the actual
temperature currently within that compartment,
Do not change the temperature more than one degree at a time. Allow the temperature to
stabilize for 24 hours before making another temperature adjustment
tf either compartment is too cold
Adjust the compartment temperature up I°F by pressing the appropriate A button for the
compartment If display set to degrees Cekius, temperature will go up 1°C at a time (see page 15).
If either compartment is too warm
Adjust the compartment temperature down I_'F by pressing the appropriate _ button for the
compartment. If display set to degrees Celcius, temperature will go down 1_'Cat a time (see
page 15).
To turn the refrigerator off
Press either of the _ buttons repeatedly, until the numbers disappear from the disphy. THIS
WILL TURN THE WHOLE REFRIGERA:_ORUNIT (both fresh food and freezer compartments) OFF,
although the compartment lights remain on.
To turn back on, press the _ button until the desired temperature is reached.
Note: if turning the refrigerator off, ensure ALL food and ice is removed.

l%mperature controls (RX256©TTX1 }
Speed Ice
Sometimes you need more ice than normal. Speed Ice will solve this problem by dropping
the freezer compartment temperature, increasing ice production by up to a third over normal
production.
To activate Speed Ice simply press the SPEED ICE button
The indicator fight wi[[ illuminate, and the Speed Ice function wi[[ be activated for 24 hours.
After this time the indicator fight will turn off and the freezer compartment temperature will
return to the previously selected temperature.
When Speed ke is activated the freezer compartment temperature can not be adjusted.
Vacation Mode
If you are going on vacation, there is an easy way to save energy and money. Vacation Mode
makes defrosts occur less frequently, consuming less energy.
To activate Vacation Mode simply press the VACATION MODE button
The indicator fight will illuminate, and Vacation Mode will remain on until deactivated. To
deactivate the mode, open either door or press the MACAHON MODE button. Opening a door in
the first hour after activation will not deactiwste this mode. The indicator light will go out when
deactivated.
See Preparing for vacation (page 35) for more details.
Max Cool
Having the door open for a long time, or loading the refrigerator full of warm food (such as after
a trip to the supermarket) will raise the temperature of the refrigerator. The Max Cool function
will drop the fresh food and freezer compartments to their minimum temperatures for 12 hours,
and allow maximum cooling to take place.
To activate Max Cool simply press the MAX COOL button
The indicator light will illuminate, and the Max Cool function will be activated for 12 hours. After
this time the indicator light will turn off, and both compartments will return to their previously
selected temperatures.Tb deactivate Max Cool in less than 12 hours, press the MAX COOL button.
When the Max Cool feature is activated neither of the temperature adjustments will operate.

]%mperature controls (RX256©T7XS }
Reset Filter
The water filter needs to be replaced every 12 months, or after 750 gallons (2838 liters) of
water has been dispensed (whkh ever is sooner). To remind you of this, the orange Order light
will illuminate after 11 months or once 90% of the volume of water has been dispensed. The
red Re@ace light will illuminate after 12 months, or once 750 gallons (2838 liters) have flowed
through. Install a new filter immediately when the red light shows up (see page 25).
After replacing the filter, reset the filter by pressing and holding the RESETFI[i[ER button for two
seconds. Both lights will go off.
The Temp Alarm system will tell you if compartment temperatures exceed normal operating
temperatures due to a power outage (or other event). When activated, the ]%mp Alarm light will
illuminate.
If the temperatures exceed operating limits, the display will show the highest compartment
temperatures reached when the power was out. Once the refrigerator starts to cool, the display
will alternate between the current compartment temperature and the highest temperature
reached. An audible alarm will sound repeatedly.
Press the TEMP ALARM button once to stop the audible alarm. The ]%mp Alarm light will
continue to flash and the temperatures will alternate.
To turn offTemp Alarm, press and hold theTEMP ALARM button for three seconds. The indicator
light will go off.
Door Alarm
The Door Alarm will alert you when one of the doors has been left open for five continuous
minutes. This is to ensure your food will not spoil accidentally. When this happens, an audible
alarm will sounds every few seconds until the door is closed, or the DOOR ALARM button is
pressed.

]%mperature controls (BX256©TTX1 }
Your refrigerator has a User Preference menu, in which you can alter settings to suit you.
To access the User Preferences menu, press and hold the DOOR ALARM button for three seconds.
When in the User Preferences menu, a short title for the feature will appear in the freezer
temperature display and the feature status will appear in the refrigerator display.
Use the freezer _ or _ buttons to scroll through the features.
When the desired feature is displayed, use the refrigerator _:::s or V buttons to change the
status.
When changes are complete close the fresh food door.
The following features can be accessedthrough the User Preferencesmenu.
Display (F_C)
Changethe displayto showthetemperaturein degreesFahrenheit(F)ordegreesCelsius(C).
Alarm (AL)
When the Alarm Mode is OFBno audible alarms will sound,
Auto Light Level Selection (LL)
When Auto Light is activated, it controls the level at which the dispenser light will illuminate
when the sensor detects the light leveb in the room are low (see page 21). Setting 1 is the
darkest light level setting, setting 9is the lightest light level setting,
Sabbath Mode (SAg)
When the Sabbath Mode is ON, a[[ control and exterior lights wi[[ be disabled until the feature
is turned OFF.This feature does not disable the interior lights. Press any button to restore the
control lights, and turn off Sabbath Mode.
Note: Warm cabinet surfaces
At times the front of the refrigerator cabinet may be warm to the touch,This is a normal
occurrence that helps prevent moisture from condensing on the cabinet. This condition will be
more noticeable when the refrigerator is first started, during hot weather and after excessive or
lengthy door openings.

]%mperature centreB (RX256DT4X1 /RX216DT4Xl }
There are two control panels on your refrigerator, one on outside of the door and one inside the
fresh food compartment Temperature is controlled through the panel located at the inside top
on the fresh food compartment
The temperatures are preset to setting 4 in both the fresh food and freezer compartments,
After being switched on, the refrigerator will take several hours to cool, depending on the
environment it is placed in, 'fbu can start to store food in it 3 -4 hours after it was turned on,
After placing food in the refrigerator, leave it to stabilize for 24 hours, After this time you may
wish to alter the temperature. The fresh food and the freezer compartments are independent of
each other, and their temperatures are set individually.
There are seven possiNe settings for each compartment:
1 2 3 4 5
Warmest Recommended
7
Coldest
Do not change the temperature more than one setting at a time. Allow the temperature to
stabilize for 24 hours before making another temperature adjustment
If either compartment is too co_d
Adjust the compartment temperature down one setting by pressing the appropriate V button
for the compartment
If either compartment is too warm
Adjust the compartment temperature up one setting by pressing the appropriate S button for
the compartment
To turn the refrigerator off
Press either of the _ buttons repeatedly, until the numbers disappear from the display. THIS
WILL TURN THE WHOLE REFRIGERATORUNIT OFF (both fresh food and freezer compartments),
akhough the compartment lights remain on.
To turn back on, press the V button until the desired temperature is reached.
Note: if turning the refrigerator off, ensure ALL food and ice is removed.
The water filter needs to be replaced regularly. This is monitored through the control panel on
the front of the refrigerator door (see page 21).

Fresh food features
The fresh food compartment is designed to keep your fresh food as fresh, chilled, heakhy, and
tasty as possible,
Fruit and vegetaHe storage
The fruit and vegetable storage bin provides an environment in which you control the humidity,
Fruit and vegetables stored in the normal refrigerator environment will lose moisture very
qukkly to the cold, dry air. This means they will shdvel and lose flavor very quickly. By
controlling the humidity in the bin, the air is kept moist, and fruit and vegetables retain
significantly more moisture. This keeps them more flavorsome, fresher and heakhier, for longer.
Fruit needs slightly lower humidity than vegetables, so the storage bin has an adjustable slide
with three settings,
..... Low
SuitaMe for: VegetaMes Mixed fruit Fruit with
Lettuce and vegetables skin/peel
Spinach _ Oranges
Broccoli _ Lemons
Carrots _ Grapes
Plums
Fig5 Humidity Control Settings
To remove
Pull drawer out to full ex[ension.
Tilt up front of drawer and pull straight out
To install
Insert drawer into frame rails and push back into place.
Meat drawer Ng d Fruit _;nd veg_*.r_s,ble bin
The temperature controlled meat drawer at the bottom of the fresh food compartment provides
an environment perfect for storing a range of items. It has two settings - cold setting and
coldest setting,
The coldest setting is tightly colder than the rest of the fresh food compartment, and is perfect
for storing meat The cold setting is a similar temperature as the fresh food compartment, and is
great for other fresh foods. To change between settings slide the control to the desired setting.

Fresh food features
There are a number of customizable storage options throughout the compartment.
Shelves
To avoM personal fnjury or property damag6 observe the following:
Never attempt to adjust a sheff that fs loaded wfth food°
Confirm sheff Lssecure before pfadng ftems on sheff°
Handle tempered glass shrives carefutlyo Shrives may break suddeMy ffnkke4 scratche4 or
exposed to sudden temperature changes°
Your refrigerator is fitted with shelves specially designed to retain spills, making clean up easier.
To remove a shelf s/ghUy tilt up the front and lift up the rear of the shelf, then pull the shelf
straight out.
To install a shelf flit the front edge up and insert the [looks into the desired frame openings and
let the shelf settle into place. Be sure the shelf is securely locked at the rear.
The top of each bin serves as the shelf above it. To remove the bin top place hand under the
frame to push the glass up. Lift glass out. To install, reverse the instructions.
Covered storage bucket (select models)
The storage bucket has a lid and removable egg tray. When the
tray is removed the bucket will fit other items, such as a standard
egg carton.
Wine bottle holder (select models)
The wine bottle holder will hold a single bottle.lb install slide the
upper lip of the holder along the top left side of any shelf, so tile
holder sits underneath the shelf.
Fig,7 Covered storcTge bucket
Door buckets (for fresh food and freezer compartments)
Door buckets can be moved to meet individual storage needs.
To remove lift the bucket up and pull straight out.
To install place bucket in desired door liner retainer, push down
gently until bucket stops.
Fig.8 Door bucket