Fisher & Paykel WB24SDEB1 User manual

Prior to Installation
• The cavity is square and level, and of the required dimensions.
• The installation will comply with all clearance requirements and applicable standards and regulations.
• The power switch will be easily accessible to the customer when the warming drawer is installed.
• The warming drawer (and any product on top of it) will rest on a surface that can support its weight.
• The height from the floor suits the customer.
• You consult local building authorities and by-laws if in doubt regarding installation.
If Installing with a Companion Product
• If installing with a companion product please refer to the installation instructions of that product
to ensure the installation requirements of BOTH products are met.
• When installing products on top of the warming drawer, the weight of the product should be
distributed across the edges of the warming drawer.
• Products above which rest on ‘feet’ may only be installed if the feet of the product lie within 2 3/
4” (70mm) of the sides of the warming drawer, as this area is reinforced. Failure to do this may
result in damage to the warming drawer and companion product.
https://producthelp.fisherpaykel.com/us/Cook/Companion_Products/Warming_Drawers/WB24SDEB1/Installation_Guide_WB2…
Updated: Tue, 06 Jun 2023 17:41:54 GMT
Powered by
1

Warming Drawer can withstand a maximum weight of 132lb (60kg)
https://producthelp.fisherpaykel.com/us/Cook/Companion_Products/Warming_Drawers/WB24SDEB1/Installation_Guide_WB2…
Updated: Tue, 06 Jun 2023 17:41:54 GMT
Powered by
2