Fisher-Price Stow ‘n Go Booster Seat 79463 User manual

Model Number 79463 WARNING
To prevent falls, always secure
booster seat with safety belt. Never
leave child unattended.
Adjusting the Strap
Please keep these instructions for future reference
No assembly is required.
Remove the strap from inside
Stow ‘n Go Booster Seat™before use.
Stow ‘n Go Booster Seat™
Backpack
Carry Pack
Surprise!
A booster seat
that converts to
a backpack
or carry pack.
IMPORTANT! Before each use or assembly, inspect this
product for damage. DO NOT use if any parts are missing or
broken. Contact Fisher-Price®for replacement parts and
instructions if needed. Never substitute parts.
• Place the booster
seat upright on
a chair.
• Unfasten the seat
back and lift.
• Wrap the strap
around the bottom
of the chair .
• Fasten both straps .
Make sure you hear
a “click”.
• Tighten the strap .
• Pull down on the
strap to be sure it
is secure around
the chair bottom.
• Turn the booster seat upside down.
• Unfasten the fasteners on the sides of the booster seat
to locate the attachment rings.
• Fasten the strap hooks to the booster seat attachment
rings. Pull up on each hook to be sure it is secure to each
attachment ring.
• Fasten the fasteners on the sides of the booster seat.
Strap
Booster
Seat
Attached End Attached End
Attaching to a Chair
To loosen the strap:
• Feed the free end of the
strap up through the
buckle to form a loop .
• Enlarge the loop by
pulling on the end of the
loop toward the buckle.
• Pull the attached end of
the strap to shorten the
free end of the strap .
To tighten the strap:
• Feed the attached end of
the strap up through the
buckle to form a loop .
• Pull the free end of the
strap .
1
2Seat
Back
Booster Seat
Free End Free End
B
A
B
A
Hook
Attachment
Ring
Attachment
Ring
Fastener
Fastener
Hook
A
C
B
A
A
B
A
C
B
Consumer Information
Occasionally a consumer may experience a problem with
one of our products. If this should happen, please call us,
toll-free, rather than return this product to the store. Usually
we can solve the problem on the telephone or by sending
you replacement parts. Please call Fisher-Price®Consumer
Affairs, toll-free at 1-800-432-KIDS, 8 AM - 5 PM EST
Monday through Friday. Hearing-impaired consumers using
TTY/TDD equipment, please call 1-800-382-7470. Or, write
to: Fisher-Price®Consumer Affairs, 636 Girard Avenue,
East Aurora, New York 14052.
B

• Place the booster seat upright on a bench.
• Unfasten the seat back and lift.
• Wrap the strap around the bottom of the bench .
• Fasten both straps . Make sure you hear a “click”.
• Tighten the strap .
• Pull down on the strap to be sure it is secure around the
bench bottom.
• Lower the seat back and fasten the fastener.
• Unfasten the zipper on the large pocket.
• Remove the plastic seat insert from the booster seat
liner. Wipe the plastic seat insert and booster seat
liner with a mild cleaning agent and damp cloth. Rinse
with clean water to remove residue.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2000 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Printed in China 79463a-0920
1
2Seat Back Strap
• Turn the booster seat upside down.
• Fasten the strap hooks to the booster seat attachment
rings. Pull up on each hook to be sure it is secure to each
attachment ring.
For Backpack:
• Fit the strap through the loop on the booster seat.
• Fasten both straps. Make sure you hear a “click”.
• Tighten or loosen the strap, as needed.
For Carry Pack:
• Fasten both straps. Make sure you hear a “click”.
• Tighten or loosen the strap, as needed.
• Turn the booster seat upside down.
• Unfasten the fasteners on the sides of the booster seat to
locate the attachment rings.
• Fasten the strap hooks to the booster seat attachment rings.
Pull up on each hook to be sure it is secure to each
attachment ring.
• Fasten the fasteners on the sides of the booster seat.
• Position the plastic
seat insert with the
seat back facing up.
• Position the booster
seat liner with the outer
fastener tabs upright.
Unfasten the zipper on
the large pocket.
• Fit the plastic seat insert
into the large pocket in
the booster seat liner,
so that the seat back fits
into the upper pocket.
• Make sure the inner
fastener tabs on the
booster seat liner are
through the openings in
the plastic seat insert.
• Turn the booster seat
over with the Fisher-Price®
logo down.
• Fasten the outer fastener
tabs to the inner fastener
tabs.
• Fasten the zipper closed.
Care
IMPORTANT! Before each use or assembly, inspect this
product for damage. DO NOT use if any parts are missing or
broken. Contact Fisher-Price®for replacement parts and
instructions if needed. Never substitute parts.
Attaching to a Bench
1
2Loop
Strap
Hook
Attachment
Ring
Hook
Attachment
Ring
Hook
Attachment
Ring
Fastener
Hook
Attachment
Ring
Fastener
Upper
Pocket
Outer
Fastener
Tabs
Large
Pocket
Seat
Back
Plastic Seat Insert
Outer Fastener Tabs
Inner Fastener Tabs
A
C
B
C
A
B
Backpack
Carry Pack
Using as a Backpack
or Carry Pack