Fisher FSAIF-Pro-93AE2 User manual

SERVICE MANUAL
Room Air Conditioner
Split Wall-Mounted Type
FSAIF-Pro-93AE2 / FSOAIF-Pro-93AE2
FSAIF-Pro-123AE2 / FSOAIF-Pro-123AE2
FSAIF-Pro-183AE2 / FSOAIF-Pro-183AE2
FSAIF-Pro-243AE2 / FSOAIF-Pro-243AE2
NOTE:
Before servicing the unit, please read this at first.
Always contact with your service center if meet problem.
FI_SM_FSAIF-PRO-93-123-183-243AE2_150908

CONTENTS
1. Precaution .............................................................................................................................................. 3
1.1 Safety Precaution .......................................................................................................................... 3
1.2 Warning ......................................................................................................................................... 3
2. Function ................................................................................................................................................. 7
3. Dimension .............................................................................................................................................. 9
3.1 Indoor Unit ..................................................................................................................................... 9
3.2 Outdoor Unit ................................................................................................................................. 11
4. Refrigerant Cycle Diagram ...................................................................................................................12
5. Wiring Diagram .....................................................................................................................................13
5.1 Indoor Unit ................................................................................................................................... 13
5.2 Outdoor Unit ................................................................................................................................ 13
6 Installation Details .................................................................................................................................19
6.1 Wrench torque sheet for installation ........................................................................................... 19
6.2 Connecting the cables ................................................................................................................ 19
6.3 Pipe length and the elevation ..................................................................................................... 20
6.4 Installation for the first time ......................................................................................................... 21
6.5 Adding the refrigerant after running the system for many years ................................................ 24
6.6 Re-installation while the indoor unit need to be repaired ........................................................... 25
6.7 Re-installation while the outdoor unit need to be repaired ......................................................... 27
7. Operation Characteristics.....................................................................................................................30
8. Electronic function................................................................................................................................31
8.1 Abbreviation ................................................................................................................................ 31
8.2 Display function ........................................................................................................................... 31
8.3 Main Protection ........................................................................................................................... 32
8.4 Operation Modes and Functions ................................................................................................. 34
9. Troubleshooting ....................................................................................................................................52
9.1 Indoor Unit Error Display............................................................................................................. 52
9.2 Diagnosis and Solution ............................................................................................................... 53

3
1. Precaution
1.1 Safety Precaution
 To prevent injury to the user or other people and property damage, the following
instructions must be followed.
 Incorrect operation due to ignoring instruction will cause harm or damage.
 Before service the unit, be sure to read this service manual at first.
1.2 Warning
 Installation
 Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated
circuit.
There is risk of fire or electric shock.
 For electrical work, contact the dealer, seller, a qualified electrician, or an authorized
service center.
Do not disassemble or repair the product, there is risk of fire or electric shock.
 Always ground the product.
There is risk of fire or electric shock.
 Install the panel and the cover of control box securely.
There is risk of fire of electric shock.
 Always install a dedicated circuit and breaker.
Improper wiring or installation may cause fore or electric shock.
 Use the correctly rated breaker of fuse.
There is risk of fire or electric shock.
 Do not modify or extend the power cable.
There is risk of fire or electric shock.
 Do not install, remove, or reinstall the unit by yourself (customer).
There is risk of fire, electric shock, explosion, or injury.
 Be caution when unpacking and installing the product.
Sharp edges could cause injury, be especially careful of the case edges and the fins on the

4
condenser and evaporator.
 For installation, always contact the dealer or an authorized service center.
 Do not install the product on a defective installation stand.
 Be sure the installation area does not deteriorate with age.
If the base collapses, the air conditioner could fall with it, causing property damage, product failure,
and personal injury.
 Do not let the air conditioner run for a long time when the humidity is very high and a
door or a window is left open.
 Take care to ensure that power cable could not be pulled out or damaged during
operation.
There is risk of fire or electric shock.
 Do not place anything on the power cable.
There is risk of fire or electric shock.
 Do not plug or unplug the power supply plug during operation.
There is risk of fire or electric shock.
 Do not touch (operation) the product with wet hands.
 Do not place a heater or other appliance near the power cable.
There is risk of fire and electric shock.
 Do not allow water to run into electrical parts.
It may cause fire, failure of the product, or electric shock.
 Do not store or use flammable gas or combustible near the product.
There is risk of fire or failure of product.
 Do not use the product in a tightly closed space for a long time.
Oxygen deficiency could occur.
 When flammable gas leaks, turn off the gas and open a window for ventilation before
turn the product on.
 If strange sounds or smoke comes from product, turn the breaker off or disconnect the
power supply cable.
There is risk of electric shock or fire.
 Stop operation and close the window in storm or hurricane. If possible, remove the
product from the window before the hurricane arrives.

5
There is risk of property damage, failure of product, or electric shock.
 Do not open the inlet grill of the product during operation. (Do not touch the electrostatic
filter, if the unit is so equipped.)
There is risk of physical injury, electric shock, or product failure.
 When the product is soaked, contact an authorized service center.
There is risk of fire or electric shock.
 Be caution that water could not enter the product.
There is risk of fire, electric shock, or product damage.
 Ventilate the product from time to time when operating it together with a stove etc.
There is risk of fire or electric shock.
 Turn the main power off when cleaning or maintaining the product.
There is risk of electric shock.
 When the product is not be used for a long time, disconnect the power supply plug or
turn off the breaker.
There is risk of product damage or failure, or unintended operation.
 Take care to ensure that nobody could step on or fall onto the outdoor unit.
This could result in personal injury and product damage.
 CAUTION
 Always check for gas (refrigerant) leakage after installation or repair of product.
Low refrigerant levels may cause failure of product.
 Install the drain hose to ensure that water is drained away properly.
A bad connection may cause water leakage.
 Keep level even when installing the product.
It can avoid vibration of water leakage.
 Do not install the product where the noise or hot air from the outdoor unit could damage
the neighborhoods.
It may cause a problem for your neighbors.
 Use two or more people to lift and transport the product.
 Do not install the product where it will be exposed to sea wind (salt spray) directly.
It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins,

6
could cause product malfunction or inefficient operation.
 Operational
 Do not expose the skin directly to cool air for long time. (Do not sit in the draft).
 Do not use the product for special purposes, such as preserving foods, works of art etc.
It is a consumer air conditioner, not a precision refrigerant system.
There is risk of damage or loss of property.
 Do not block the inlet or outlet of air flow.
 Use a soft cloth to clean. Do not use harsh detergents, solvents, etc.
There is risk of fire, electric shock, or damage to the plastic parts of the product.
 Do not touch the metal parts of the product when removing the air filter. They are very
sharp.
 Do not step on or put anything on the product. (outdoor units)
 Always insert the filter securely. Clean the filter every two weeks or more often if
necessary.
A dirty filter reduces the efficiency of the air conditioner and could cause product malfunction or
damage.
 Do not insert hands or other objects through air inlet or outlet while the product is
operated.
 Do not drink the water drained from the product.
 Use a firm stool or ladder when cleaning or maintaining the product.
Be careful and avoid personal injury.
 Replace the all batteries in the remote control with new ones of the same type. Do not
mix old and new batteries or different types of batteries.
There is risk of fire or explosion.
 Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire.
They may burn of explode.
 If the liquid from the batteries gets onto your skin or clothes, wash it well with clean
water. Do not use the remote of the batteries have leaked.

7
2. Function
Model Names of Indoor/Outdoor Units
DC
Inverter
Capacity Indoor units Outdoor units
9k FSAIF-Pro-93AE2 FSOAIF-Pro-93AE2
12k FSAIF-Pro-123AE2 FSOAIF-Pro-123AE2
18k FSAIF-Pro-183AE2 FSOAIF-Pro-183AE2
24k FSAIF-Pro-243AE2 FSOAIF-Pro-243AE2

8
O: optional function

9
3. Dimension
3.1 Indoor Unit
WD
H
Model W D H
FSAIF-Pro-93AE2 800 188 275
FSAIF-Pro-123AE2 800 188 275
FSAIF-Pro-183AE2 940 205 275
FSAIF-Pro-243AE2 1045 235 315

10
Model L(mm) R(mm) H(mm) Dimension of installation
hole(mm)
FSAIF-Pro-93AE2
100 95 45
￠65 FSAIF-Pro-123AE2
FSAIF-Pro-183AE2 110 100 45
Model L(mm) R(mm) H(mm) Dimension of installation hole(mm)
FSAIF-Pro-243AE2 293 163 45 ￠65
H
L R

11
3.2 Outdoor Unit
More than 30cm
More than 60cm
More than 200cm
More than 30cm
More than 60cm
(Service space)
Fence or
obstacles
Model W D H W1 A B
FSOAIF-Pro-93AE2 780 250 540 843 549 276
FSOAIF-Pro-123AE2 780 250 540 843 549 276
FSOAIF-Pro-183AE2 810 310 558 874 549 325
FSOAIF-Pro-243AE2 845 320 700 908 560 335

12
4. Refrigerant Cycle Diagram
CHECK VALVE
(Heating Model only)
CAPILIARY TUBE
LIQUID SIDE
GAS SIDE
HEAT
EXCHANGE
(EVAPORATOR) HEAT
EXCHANGE
(CONDENSER)
Compressor
2-WAY VALVE
3-WAY VALVE
4-WAY VALVE
COOLING
HEATING
T2 Evaporator
temp. sensor
T1 Room temp.
sensor
T3 Condenser
temp. sensor
Accumulator T5 Discharge temp. sensor
T4 Ambient
temp. sensor
INDOOR OUTDOOR

13
5. Wiring Diagram
FSAIF-Pro-93AE2
FSAIF-Pro-183AE2
FSAIF-Pro-243AE2

14
FSAIF-Pro-123AE2

15
5.2 Outdoor Unit
FSOAIF-Pro-93AE2

16
FSOAIF-Pro-123AE2

17
FSOAIF-Pro-183AE2

18
FSOAIF-Pro-243AE2

19
6 Installation Details
6.1 Wrench torque sheet for installation
Outside diameter Torque Additional tightening torque
mm inch N.cm N.cm
Ф6.35 1/4 1500(153kgf.cm) 1600(163kgf.cm)
Ф9.52 3/8 2500(255kgf.cm) 2600(265kgf.cm)
Ф12.7 1/2 3500(357kgf.cm) 3600(367kgf.cm)
Ф15.9 5/8 4500(459kgf.cm) 4700(479kgf.cm)
Ф19 3/4 6500(663kgf.cm) 6700(683kgf.cm)
6.2 Connecting the cables
The power cord of connect should be selected according to the following specifications sheet.
Capacity kBTU/h Nominal cross-sectional area (mm²)
9 3x2,5
12 3x2,5
18 3x2,5
24 3x2,5
The cable size and the current of the fuse or switch are determined by the maximum current indicated
on the nameplate which located on the side panel of the unit. Please refer to the nameplate before
selecting the cable, fuse and switch.

20
6.3 Pipe length and the elevation
The pipe length and refrigerant amount:
Model
Pipe size Standard
length
(m)
Max.
Elevation
B (m)
Max.
Length
A (m)
Additional
refrigerant
(g/m)
Gas Liquid
9k 3/8’’
(Ф9.52)
1/4’’
(Ф6.35)
5 10 25 15
12k 5 10 25 15
18k 1/2’’
(Ф12.7)
1/4’’
(Ф6.35) 5 20 30 15
24k 3/5’’
(Ф15.9)
3/8’’
(Ф9.52) 5 25 50 30
Caution:
The capacity test is based on the standard length and the maximum permissive length is based on the
system reliability.
The oil trap should be installed per 5-7 meters.