manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Fishman
  6. •
  7. Music Equipment
  8. •
  9. Fishman RARE EARTH - User manual

Fishman RARE EARTH - User manual

Other manuals for RARE EARTH -

4

This manual suits for next models

1

Other Fishman Music Equipment manuals

Fishman M-300 - INSTALLATION GUIDE REV C User manual

Fishman

Fishman M-300 - INSTALLATION GUIDE REV C User manual

Fishman ELLIPSE VT - User manual

Fishman

Fishman ELLIPSE VT - User manual

Fishman POWERJACK User manual

Fishman

Fishman POWERJACK User manual

Fishman VT POWERBRIDGE - ROUTING User manual

Fishman

Fishman VT POWERBRIDGE - ROUTING User manual

Fishman C-100 User manual

Fishman

Fishman C-100 User manual

Fishman M-200 PRO MANDOLIN PICKUP User manual

Fishman

Fishman M-200 PRO MANDOLIN PICKUP User manual

Fishman VTB User manual

Fishman

Fishman VTB User manual

Fishman ELLIPSE BLEND - User manual

Fishman

Fishman ELLIPSE BLEND - User manual

Fishman M-100 MANDOLIN PICKUP User manual

Fishman

Fishman M-100 MANDOLIN PICKUP User manual

Fishman NASHVILLE M-300 User manual

Fishman

Fishman NASHVILLE M-300 User manual

Fishman INK PLUS User manual

Fishman

Fishman INK PLUS User manual

Fishman VTB - DRILLING User manual

Fishman

Fishman VTB - DRILLING User manual

Fishman Greg Koch Gristle-Tone User manual

Fishman

Fishman Greg Koch Gristle-Tone User manual

Fishman ELLIPSE AURA - User manual

Fishman

Fishman ELLIPSE AURA - User manual

Fishman SWITCHJACK User manual

Fishman

Fishman SWITCHJACK User manual

Fishman RARE EARTH BLEND User manual

Fishman

Fishman RARE EARTH BLEND User manual

Fishman ELLIPSE BLEND - User manual

Fishman

Fishman ELLIPSE BLEND - User manual

Fishman ELLIPSE BLEND - Dimensions

Fishman

Fishman ELLIPSE BLEND - Dimensions

Fishman ELLIPSE BLEND - User manual

Fishman

Fishman ELLIPSE BLEND - User manual

Fishman ELLIPSE BLEND - User manual

Fishman

Fishman ELLIPSE BLEND - User manual

Fishman NEO-D - ANNEXE 282 User manual

Fishman

Fishman NEO-D - ANNEXE 282 User manual

Fishman RESONATOR GUITAR PICKUP User manual

Fishman

Fishman RESONATOR GUITAR PICKUP User manual

Fishman BP-100 User manual

Fishman

Fishman BP-100 User manual

Fishman RARE EARTH - User manual

Fishman

Fishman RARE EARTH - User manual

Popular Music Equipment manuals by other brands

Aguilar CHORUSAURUS user guide

Aguilar

Aguilar CHORUSAURUS user guide

HEXDEVICES Tama 12 user manual

HEXDEVICES

HEXDEVICES Tama 12 user manual

Mesa/Boogie Flux-drive owner's manual

Mesa/Boogie

Mesa/Boogie Flux-drive owner's manual

DOLFINOS The CARBON Edition user manual

DOLFINOS

DOLFINOS The CARBON Edition user manual

DAPAudio IPS-PT user guide

DAPAudio

DAPAudio IPS-PT user guide

Dynacord DPM 8016 owner's manual

Dynacord

Dynacord DPM 8016 owner's manual

Moen GEC8 Live owner's manual

Moen

Moen GEC8 Live owner's manual

Fender 1 brochure

Fender

Fender 1 brochure

Yamaha MLC-16 operating manual

Yamaha

Yamaha MLC-16 operating manual

Sonuscore TIME TEXTURES manual

Sonuscore

Sonuscore TIME TEXTURES manual

flight of harmony V'Amp user guide

flight of harmony

flight of harmony V'Amp user guide

NANO PERFORMANCE MIXER quick guide

NANO

NANO PERFORMANCE MIXER quick guide

BHI NEIM 1031 MKII user guide

BHI

BHI NEIM 1031 MKII user guide

Befaco KICKALL user manual

Befaco

Befaco KICKALL user manual

Paia 9720 Assembly and using manual

Paia

Paia 9720 Assembly and using manual

limex ALPIN MASTER 128 user manual

limex

limex ALPIN MASTER 128 user manual

nord Electro 3 user manual

nord

nord Electro 3 user manual

CARVIN 500W STEREO POWER MODULE - SCHEMA REV G manual

CARVIN

CARVIN 500W STEREO POWER MODULE - SCHEMA REV G manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

Thank you choosing the Rare Earth™ Banjo Pickup. It is our wish that you are
completely satisfied with this product. If you have any questions or comments, we
would like to hear from you. You may reach our customer service department at 978-
988-9665 or [email protected]
With key input (and ears) from several top players, we spent over a year refining and
dialing in this pickup's performance until we were confident that we got it right.
To achieve noise-free, microphone-like reproduction, this pickup takes full advantage
of cutting-edge active transducer technology borrowed from our acclaimed Rare
Earth™ magnetic soundhole acoustic guitar pickups.
Like its guitar-pickup cousin, this new banjo pickup features a quiet humbucking coil
design that dutifully rejects noise and hum. A powerful neodymium magnet focuses
the banjo's sound through a small steel shim that attaches to the head (not the
player's head, the banjo’s). Hidden in the pickup's case is a stealthy preamplifier,
which strengthens the signal and preserves the natural sound of the instrument. The
pickup can mount on either dual or single coordinator rod banjos (single rod
instruments require a special fitting). With a battery life of well over 5,000 hours, you
can expect years of use between battery changes.
Parts List
Banjo Pickup
Jack Assembly with:
• Switchjack™
• Curved Bracket
• 3/8" Nut
• 3/8" Dress Washer
• 15/23" Dress Washer
• Plastic Spacer for Jack
• 2 Plastic Spacers
• 2 Off-center Washers
• 2 Flat Washers
• 2 10-32 x 3/4" Screws
• 2 Locknuts
• Blue Steel Shim
(sensing element)
Tools Required
• 1/8" Hex Wrench
• 3/8" Wrench
• 1/2” Wrench
• Soldering Iron
Note: If you do not feel confident with a
soldering iron, please have the pickup installed
by a professional repair person.
Specifications
Pickup Coil: Stacked Humbucking
Preamp: Low Noise, Discrete,
0 Feedback Circuit
Nominal Output: -10dBu
Noise: -94dBu, A Weighted
Output Impedance: 3k Ohm
Minimum Recommended Load Impedance:
>10 k Ohm
Power: 9 V Alkaline Battery
Battery Life: Over 5000 Hours
The FISHMAN RARE EARTH™ BANJO PICKUP is warranted to function for a
period of One (1) Year from the date of purchase. If the unit fails to function
properly within the warranty period, free repair and the option of replacement or
refund in the event that FISHMAN is unable to make repair are FISHMAN’s only
obligations. This warranty does not cover any consequential damages or damage to
the unit due to misuse, accident, or neglect. FISHMAN retains the right to make
such determination on the basis of factory inspection. Products returned to
FISHMAN for repair or replacement must be shipped in accordance with the Return
Policy, as follows. This warranty remains valid only if repairs are performed by
FISHMAN. This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state.
RETURN POLICY
To return products to FISHMAN TRANSDUCERS, you must follow these steps...
1. Call FISHMAN TRANSDUCERS at 978-988-9199 for a Return Authorization
Number (“RAN”).
2. Enclose a copy of the original Bill of Sale as evidence of the date of purchase,
with the product in its original packaging and a protective carton or mailer.
3. FISHMAN TRANSDUCERS’ technicians will determine whether the item is
covered by warranty or if it instead has been damaged by improper customer
installation or other causes not related to defects in material or workmanship.
4. Warranty repairs or replacements will be sent automatically free of charge.
5. If FISHMAN TRANSDUCERS determines the item is not covered by warranty, we
will notify you of the repair or replacement cost and wait for your authorization to
proceed.
FISHMAN TRANSDUCERS
®
340-D Fordham Road Wilmington MA 01887 USA
Phone 978-988-9199 • Fax 978-988-0770
www.fishman.com
009-035-002 • 8-01
Limited
Limited W
Warranty
arranty
®
Installation Guide
Installation Guide
f
for Coor
or Coordinator
dinator-r
-rod Banjos
od Banjos
®
ACTIVE MAGNETIC BANJO PICKUP
TM
2
2
Rare Ear
Rare Earth™ Banjo
th™ Banjo
Remove the shielding barrel from the jack, run the wire through it, then solder:
• Red wire to tip (shortest terminal)
• White wire to switch (longest terminal)
• Shield to ground (hooked terminal)
Attach a 9 Volt Alkaline battery to the battery clip.
Slip the battery into the holder on the backside of the pickup.
Plug It In
Once everything is buttoned up, plug in the banjo and if necessary, adjust the position of
the pickup along the rods for best sound. Make sure the pickup is spaced 1/16" from the
underside of the head. Very small adjustments will make noticeable changes. Experiment
until you find the Sweet Spot - the loudest and clearest position.
Adapter for Banjos with a Single Coordinator Rod
Two adapter blocks can be made to fit the pickup to a banjo with a single coordinator rod. A hard wood
such as maple is suitable for the blocks.
11..A split block can be made by first drilling a hole one drill size larger than the diameter of the
coordinator rod through one of the blocks. Trim the block as thin as possible on the pickup side to
minimize offset, and cut in half as per the illustration.
22..To provide friction between the clamping surfaces
and the rod, take a fine grit open mesh sanding
sheet and wrap it around the rod's circumference.
Fit the split block around the sanding sheet. If
sanding sheet isn't available, glue pieces of 220
grit sandpaper to the drilled surfaces of the block,
and fit it around the coordinator rods.
Now cut a solid block, equal in width to the split block
fitted in place. This will fit in the other half of the clamp
assembly. Note that the rubber strips should be
removed from the inside of the clamps when fitting the
pickup in this manner. There will now be a small offset
between the ideal center of the pickup and the center of
the middle foot of the bridge, but the pickup should
still function properly. Follow the rest of the
instructions for pickup installation.
55..Re-assemble the jack assembly. Wind the pickup wire several times around the
coordinator rod, then route the wire through an opening in the flange.
Solder the Wire to the Jack
BANJO HEAD
1
FLANGE
CURVED BRACKET
2
3
5
4
OROR
Mount the Pickup
11..Remove the backing paper from the small rectangular blue shim to expose the
sticky-back adhesive. Attach the shim to the head (inside the instrument) so that the
shim is centered under the coordinator rods, perpendicular to the rods and about
1/2" (12.7 mm) from the edge of the middle bridge foot.
22..Loosen the wing nut and position the pickup directly over the blue shim. The
magnet will self-locate the pickup over the shim. For a darker response, leave the
pickup positioned directly over the shim. For brighter response, move the pickup
1/4" away from the shim, towards the neck.
33..Set the pickup about 1/16" from the surface of the head. You can make a 1/16"
spacer cut from the box for this pickup and use it to set the gap between the head
and the face of the pickup.
44..After the pickup is secured to the coordinator rods, disassemble the jack then attach
the curved bracket to the flange. To accommodate different styles of flanges, we
provide two types of washers (a set of standard and off-center washers).
3
3
Rare Ear
Rare Earth™ Banjo
th™ Banjo
4
4
Rare Ear
Rare Earth™ Banjo
th™ Banjo
5
5
Rare Ear
Rare Earth™ Banjo
th™ Banjo
1 - Screws
2 - Plastic Spacers
3 - Off-Center Washers
OORR
4 - #10 Washers
5 - Locknuts
BRIDGE FEET
BLUE SHIM
TAILPIECE
NECK
1/2"
RODS
23 5461
Negative Battery Wire
(white) to Switch
Shield to
Sleeve
Pickup Signal
(red) to Tip
1 - 15/32”Dress Nut
2 - 15/32”Dress Washer
3 - Plastic Spacer
4 - Curved Bracket
5 - 3/8”Dress Washer
6 - 3/8”Dress Nut
CENTER
OFFSET
SOLID
BLOCK
COORDINATOR
ROD
SANDPAPER
SPLIT
BLOCK
BODY OF
PICKUP