Fishman ELLIPSE VT - User manual

USER GUIDE
MATRIX VT

2
Controls
Plug In • Connect the Matrix VT to your amplifier or PA with a ¼-inch
instrument cable. To conserve battery life, remove the instrument cable from the
guitar when the system is not in use.
Volume • For the cleanest noise-free sound, set the volume as high as possible
without causing your amp or mixer to distort.
Tone • Turning the Tone control counter-clockwise reduces the amount of treble
in your sound.
Battery Replacement
You can expect approximately 250 hours of continuous use between battery
changes. To replace the battery in most systems, remove the fabric battery bag
that is mounted inside the instrument. 9 Volt alkaline or lithium batteries are
suggested for optimal performance.

3
Tone
Volume
Tone

www.fishman.com
Fishman and Fishman Transducers are trademarks or tradenames of Fishman Transducers Inc. 513-300-172 Rev A 7-10