Fishman SWITCHJACK - ANNEXE 827 User manual

STEREO SWITCHING ENDPIN JACK
Our new SWITCHJACK
TM T•R•S•S (Tip/Ring/Sleeve/Switch) Stereo Switching
Endpin Jack allows simultaneous stereo operation and battery switching. This
new configuration now simplifies stereo wiring with many pickup combinations
that were previously incompatible.
• Fishman-designed, industry standard endpin jack.
• New internal contact geometry for reliable, noiseless operation and better plug retention.
• Manufactured exclusively for Fishman by Switchcraft®Inc.
Shield Tip
(Short Terminal)
Ring
TipGuitar Sleeve
1/4" Stereo Plug
Switch
(Long Terminal)
Ring
(Medium Terminal)
FISHMAN TRANSDUCERS, INC. 340-D FORDHAM ROAD, WILMINGTON, MASSACHUSETTS 01887 U.S.A.
PHONE: [phone] • FAX: [phone] • www.fishman.com
Wiring
To gain better access to the Tip, Ring and
Switch terminals, gently bend back the Strain
Relief/Sleeve tab, before you begin to solder.
TM

FISHMAN TRANSDUCERS, INC. 340-D FORDHAM ROAD, WILMINGTON, MASSACHUSETTS 01887 U.S.A.
PHONE: [phone] • FAX: [phone] • www.fishman.com
Page 2
TM
STEREO SWITCHING ENDPIN JACK
Pickup Signal
to Tip
Shield to
Sleeve
Mono Wiring a Passive Pickup
Shield to
Sleeve
Pickup Signal
to Tip
2nd Pickup
to Ring
Stereo Wiring a Second Pickup to a Passive Pickup
Shield to
Sleeve
Pickup Signal
to Tip
Microphone to Ring
Zener Diode
between Ring & Sleeve
Stereo Wiring a Passive Pickup & Microphone
Negative Battery Wire
to Switch
Shield to
Sleeve
Pickup Signal
to Tip
2nd Pickup
to Ring
Stereo Wiring a Second Pickup to an Active Pickup
Shield to
Sleeve
Pickup Signal
to Tip
Negative Battery Wire
to Switch Microphone to Ring
Zener Diode
between Ring & Sleeve
Stereo Wiring an Active Pickup & Microphone
Shield to
Sleeve
Pickup Signal
to Tip
Negative Battery Wire
to Switch
Mono Wiring an Active Pickup