FitAir JHB-18 User manual

Pic1 Pic2 Pic3 Pic4
COMPONENTS OPERATION INSTRUCTION
PACKING LIST
（Mask is NOT included in the product package）
(Wearable soluon is the default form)
USB Charging Plug Cleaning Module
Air Inlet (reusable)
1. Basic Operaon
2.Wearable Opon
ON : Short press to open (Default: low wind speed),(Pic1)
Fan Speed Switch : Short press POWER buon to adjust
Three speeds: Low, Mid, High
OFF : Long press to shut down
Baery : The color of POWER light represents the baery
capacity level
The wearable soluon is suitable for taking a baby out in a stroller,
gardening, heavy work and other outdoor acvies.
1. Put FitAir on your right arm and ghten the velcro strap (Pic1).
2. Install the Air Inlet at the mask and connect with the So Tube (Pic2).
3. Install the Air Outlet of the so tube at the Air Gate of FitAir (Pic3).
4. Adjust the length to your preference (Pic4).
Green
Yellow
Red
: High baery level
: Mid baery level
: Low baery level
So Tube
Air Gate
Air Outlet
Control Module
Wearable Seat
Power
FitAir Portable Air Purifier × 1 H13 HEPA Filter × 2
USB Charge Cable × 1 User Guide x 1
Pic1

97.8%
iOS Version
Scan to Download
or search " airdogpro"
in Apple Store
Android Version
Scan to Download
or search " airdogpro "
in Google Play Store
SPECIFICATION
WARRANTY
3.Stand-alone Opon
4.Mask Full Soluon
(The wearable form can be changed to the stand-alone
form with the following 3 steps.)
1. Disconnect the Cleaning Module and the Control
Module from the Wearable Seat by rotang
counterclockwise (Pic1).
2. Line up the “Arrow Signs” on the Cleaning Module
and the Control Module.
3. Finish the process by rotang clockwise (Pic2).
1. Prepare a new mask, draw a 3cm circle which is
smaller than the size of Air Inlet (Pic1).
2. Cut out the circle that you draw with scissors.
3. Install Air Inlet and so tube (Pic2).
5.Filter Change
Best me for filter replacement :
Change the filter when the filter color changes to dark
gray, or look for a black filter reminder in the FitAir app.
6.App Setup
USER GUIDE
Keep your Bluetooth open before FitAir pairs with
your phone.
YOUR ULTIMATE PERSONAL
AIR PURIFIER
Enter your user name to login/register
(over six characters)
Click "+" to add a device
Model: JHB-18 Voltage: 3W
Baery Life: 2~6h*2Input power: 5V
Purificaon Efficiency:
DO NOT use 9v plug
Baery Life depends on the fan speed you choose
FitAir - Silicon Valley air expert Inc.
Select " FitAir "
Start to pair
We will repair or exchange your FitAir at no cost if it
malfuncons (EXCEPT human factors ) within 1 year of
purchase (Filter, Mask and So Tube excluded). Aer 1
year, the cost of repair or exchange will be based on the
actual cost of parts and labor.
(stand-alone version)
Please contact our customer support via email
[e-mail]
for further assistance.
Success
1. Open the cap of the Cleaning Module by rotang
counterclockwise (Pic1).
2. Take out the dirty filter and put in a new one (Pic2).
3. Close the cap by rotang clockwise.
Control Module
Cleaning Module
Pic1 Pic2
Pic1 Pic2
Pic1 Pic2