FitAir JHB-18 User manual

USER GUIDE
YOUR ULTIMATE PERSONAL
AIR PURIFIER
(stand-alone version)
Silicon Valley Air Expert
Follow and like us on facebook Follow us on twier
Official Website : hp://airdogusa.com/
Customer Service : [email protected]
Scan QR code for more Video Instrucons
(Airdog Youtube channels)
Please Recycle

FitAir is a smart personal air system that improves
your health by freeing your air of viruses, smoke,
bacteria, allergens and other harmful microbes. By
cleaning within 25 square feet of your personal space
at a rate of 3x per hour, this personal shield helps to
prevent everyday intake of harmful contaminants and
allergens both indoor and outdoor. With the
one-of-kind wearable soluon, FitAir could be
aached to your tote, baby stroller, car seat etc. It is
an ideal travel companion for shared spaces and
polluted areas.
High porous inlets with 290 ports, allowing maximum
air flow of 130 L/min (average adult breathing
capacity is 10-20 L/min). It offers connuous cleaning
of 25 square feet of space surrounding you. There are
three-level of air flow adjustments.
FitAir
Your Ulmate Personal Air Purifier
High Volume Air Flow
A full charge lasts up to 6 hours (Standard Version)
/10 hours on max (Booster Version) of connuous
operaon. Different colored lights indicate remaining
baery life.
Long baery life
Normal use while charging
Easy USB Charging
Three-Level Air Volume
Hight Medium Low

Pic2
OPERATION INSTRUCTION
(Wearable soluon is the default form)
1. Basic Operaon
2. Wearable Opon
ON :Short press to open
(Default: low wind speed),(Pic1)
Fan Speed Switch : Short press POWER buon to
adjust
Three speeds: Low, Mid, High
OFF : Long press to shut down
Baery : The color of POWER light
represents the baery
capacity level
Green
Yellow
Red
: High baery level
: Mid baery level
: Low baery level
Pic1
The wearable soluon is suitable for taking a baby
out in a stroller, gardening, heavy work and other
outdoor acvies.
Put FitAir on your arm and ghten the velcro strap
(Pic2).
COMPONENTS
PACKING LIST
USB Charging Plug
Cleaning Module
Air Gate
Air Outlet
Control Module
Wearable Seat
Power
FitAir Portable Air Purifier × 1
H13/H11 HEPA Filter × 2
USB Charge Cable × 1
User Guide x 1

Best me for filter replacement:
Change the filter when the filter color changes to dark
gray.
1. Open the cap of the cleaning module by rotang
counterclockwise (Pic1).
2. Take out the dirty filter and put in a new one (Pic2).
3. Close the cap by rotang clockwise.
4. Yellow light blinks: need to change the filter.
5. Cleaning reset: long press power buon for 5
seconds unl unit is on.
6. Filter replacement is available on Airdog official
website: www.airdogusa.com.
1. You may use the mask we provide, or prepare a new
mask by drawing a 3cm circle which is slightly smaller
than the size of the air Inlet (Pic1). Cut out the circle
that you draw with scissors.
2. Install the air inlet at the mask and connect with the
so tube (Pic2).
3. Install the air outlet of the so tube at the air gate of
FitAir (Pic3).
4. Adjust the length to your preference (Pic4).
5. Accessory pack* can be purchased separately.
* Accessory pack includes 1 long silicon tube, 1 short silicon
tube, 1 connector piece, and 2 masks.
3. Stand-Alone Opon
4. Mask Full Soluon (oponal)
5. Filter Change
Pic1
Control Module
Cleaning Module
Pic2
Pic1 Pic2
Pic1 Pic2
Pic3
Pic4 Mask Full Soluon is oponal.
(The wearable form can be changed to the stand-alone
form with the following 3 steps.)
1. Disconnect the cleaning module and the control
module from the wearable seat by rotang counter-
clockwise (Pic1).
2. Line up the "arrow signs" on the cleaning module
and control module.
3. Finish the process by rotang clockwise (Pic2).

iOS Version
Scan to Download
or search " airdogpro "
in Apple Store
Android Version
Scan to Download
or search " airdogpro "
in Google Play Store
SPECIFICATION
WARRANTY
6. App Setup(oponal)
Turn on the Bluetooth in device.
Keep the Bluetooth on when pairing with FitAir.
Enter your user name to login/register
(over six characters)
Click "+" to add a device
Model: JHB-18 Input Power: 3W
Purificaon Efficiency: 97.8%Input Voltage: 5V
Baery Life: 2~6h(Standard Version)/10h on max(Booster Version)*2
DO NOT use 9v plug.
Baery Life depends on the fan speed you choose.
Select " FitAir "
Start to pair
Please contact our customer support via email [email protected]
for further assistance.
Success
Lightweight
Design
H13/H11
HEPA Filter
Wearable
Opon
Ultra
Portable
USB
Charge
High
Airflow Long
Baery Life
App
Controlled
The company warrants this product to the original purchaser
to be free from defects in workmanship and materials under
normal use and service (all except human maers) for 1 year
from date of receiving.
* This is a posive pressure mask. It helps add some protecon to you from all kinds
of pollutants outside of your breathing zone. However, if you are sick or known to
carry any virus, using FitAir will not prevent you from spreading your sickness or
viruses to others.
* Please charge it before first use and recharge it in me when power is
low to avoid baery failure.
Designed by Silicon Valley air expert Inc.
Manufactured by BeiAng Air Tech Ltd.