FITKIT FT300M User manual

Model No: FT300M
USER’S MANUAL
Note: Following the principles of sustainable development, we may modify machines
when necessary and will not notify again. It all depends on the actual product.
Always choose a treadmill that can support at least 20 more kilograms of weight than your
current weight increases during running and walking

Contents
1. Product Brief ............................................................................................................. 1
2. Security Precautions and Warnings........................................................................... 2
3. Installation Instructions............................................................................................. 5
4. Using Instructions...................................................................................................... 9
5. Routine Maintenance and Instructions.................................................................... 12

1. Product Brief
Product Name: Fitkit FT300M Motorized Treadmill
Main technical parameters
NO.
Parameter Names
Description
1
Input power voltage
220-240V(50~60Hz)
2
Motor power
5HP Peak
3
Speed
0.8-14Km/h
4
Running surface
1200*420 mm
5
Max user weight
110KG
6
Expand dimension
1710*720*1360mm
7
Function
Running (sit up, massager, dumbbells and twister)
Packing list
NO.
Name
Units
QTY
1
Complete machine
set
1
2
Accessory bag
set
1
3
Side cover
set
1
4
Display console
set
1
1

2
Accessory bag
NO.
Name
QTY
NO.
Name
QTY
1
Inner hexagon wrench 6mm
1
7
Silicon oil
1
2
Inner hexagon wrench 5mm
1
8
User manual
1
3
Wrench
1
9
MP3 Cable
1
4
Screw M8*42
2
10
Sticker
2
5
Screw M8*25
4
11
Screw M8*15
3
6
Safety key
1
12
Multi-functional model accessory
NO.
Name
QTY
NO.
Name
QTY
1
Screw M8*50
2
7
Massager
1
2
Screw M8*35
4
8
Massager frame
1
3
Screw M8*25
2
9
U-shaped tube
2
4
Lock nut M8
6
10
Dumbbell
2
5
Decorative covers
4
11
Twister
1
6
Foam
4
12
2. Security Precautions and Warning
Please read the instructions carefully before use.
◆Indoor using and storing the treadmill, avoid dampness, and cannot be spilled by water.
◆Please wear suitable clothes and sneakers before exercise. Prohibited to exercise on the
treadmill barefoot.
◆High power plug must be grounded, electric outlet should have a dedicated circuit, do not share
with other electrical equipment.
◆Keep children away from the machine to avoid accidents.
◆Avoid too long time and overloading operation, otherwise it will cause damage to motor and
controller, and will accelerate the deterioration of bearing, running belt and running board.
Should maintain machine on a regular basis.
◆Keep machine away from dust to avoid strong static.
◆Please cut electric power off after using.
Notice
Tips: Before folding the treadmill, make sure that the gradient is "zero".

3
◆Please maintain good ventilation when running.
◆Please clamp security lock cable on your clothing to make sure the machine stops at emergency
condition.
◆If you feel not very well when using this machine, please stop and consult a doctor.
◆Silicone oil must be kept away from children after use.
◆If power cord is damaged, please contact our qualified maintenance personnel for service rather
than disassemble it at your own discretion.
Forbidden
◆Don't use the machine in the status of the shell break in or break off （the internal structure
exposed）or under the condition of welding-parts may fall off.
---- Otherwise, an accident or injury may happen.
◆Don't jump up and down in the process of movement.
---- may cause injury by the fall.
◆Don't keep machine in or near moisture space, such as the bathroom.
◆Don’t place machine in places with direct sunlight, or high temperature, such as near a stove or
a heating appliance.
----Otherwise, may cause the leakage and burst into flames.
◆Don't use when the power cord is damaged or power plug pin is loose,
----otherwise, will lead to electric shock, short circuit or fire.
◆Don't damage or bent by force or reverse the power cord. Don’t place heavy objects on the
machine, don't clamp the power line.
----otherwise, will cause fire or get an electric shock.
◆People who can’t express their consciousness or operate the machine by themselves cannot use
the treadmill.
----accident or injury may occur.
Avoid drinking water or pouring water when operating.
---- may cause electric shock and fire. Forbidden!
◆People who seldom do exercise shouldn't suddenly do intense exercise.
◆After eating or when feel tired, do not use the machine.

4
---- may lead to damage to your health.
◆This product is suitable for domestic use, does not apply to schools, gymnasium and so on.
---- Warranty voids incase the product is used apart from domestic use.
◆Don’t use when hard objects are in clothes’ pockets.
----may cause accident or injury.
◆Don’t use when the power plug is on the needle, garbage, or water.
----may cause electric shock, short circuit or fire. Do not use with wet hands!
◆when not in use, pull out the power plug from the socket.
----The dust and moisture can age the insulation which may lead to leakage and fire.
! Ground protection system!
◆This product must be grounded. If the machine is dysfunctional, grounding will provide a good
channel for electric current in order to reduce the risk of electric shock.
◆This product is equipped with power plug with grounding conductor and plug. Complete insert
the plug to standard socket.
◆If the equipment’s grounding conductor connection is improper, it will cause electric shock. If
you have doubts about whether your product is grounded correct or not, please entrust
professional to check.
◆Please use the socket with the same shape with the grounding plug. Don’t use plug adapter.

5
3. Installation Instructions
When installing, simple fix all screws first, then tighten screws when the installation of frame is
done.
Step 1. Put the machine on the flat ground, cut the nylon cable on the base and set the upright
column and console up with the direction shown as below.
Step 2. Use 5# inner hexagon wrench and screw M8*42 to lock the base, and then use the 6# inner
hexagon wrench to fix the upright column to the base with screw M8*25.
Step 3. Hold left& right columns, use 6# inner hexagon wrench to lock the console frame on the
columns with screw M8*25.
Base
Frame
M8*25
M8*42
Screw M8*25

6
M8*35
Step 4. Take the display console out, and use combination wrench to remove the screws on the back
cover. Keep the screws aside to use later.
Above are steps of single function installation,multifunctional machine needs to be installed after
you complete the steps above and then continue with the following installation.
Step 5. Put two foams and four massager’s decorative covers on the U-shaped tubes.
Step 6. Use 5# inner hexagon wrench, screw M8*35 and lock nut M8 to lock the massage pipe on
the upright column (A), and then put the decorative covers to cover the screws(B).
M5x20

7
Step 7. Use 5# inner hexagon wrench and screw M8*50 to lock the massage frame and the
massage pipe, and then tighten them with lock nut M8.
Step 8. Use M8*15 screws to fix the massager on the massage frame. Button the massage belt on
the massager.
Step 9. Put foams on the frame.
M8*50
M8*15

8
Note: please confirm that all screws are locked uniformly according to the requirements after
installation, and check no part is left out before plugging electricity.
Manual incline adjustments
To change the incline, users can adjust the incline wheel: Level 1 is the lowest level and level 6
is the highest level. Please make sure the incline level is the same on both sides.
Step 10. Put the safety key on the position showing below.
Please find the red color safety key
in the accessory bag. The treadmill
can only start when the safety key is
put in the right position.
Incline
wheel

9
4. Using Instructions
Using treadmill
1) Insert the power plug properly and turn on the switch (in red color)
When the light is on, there will be beep sound, and then the screen will be light up (Systems with
TFT screen takes more time to enter the start interface).
2) Safety key Introduction
The treadmill can only start when the safety key is put on the yellow area of the console. Clip the
safety key on clothes when using the treadmill to prevent accidents. Remove the safety key from the
console can stop the treadmill immediately and put it back to continue using the treadmill.
3) Folding Instruction
Fold the treadmill:
It will save space when the treadmill is folded.
Please turn off the switch and pull out the power plug before folding. Lift the running deck until
it is held.
Unfold the treadmill:
Kick the pressure rod, hold the running deck and then let the running deck to fall gradually.
Kick
this
part to lower
the running
deck.
1

10
4) Console Instructions
Amount of programs
3 manual programs, 12 automatic programs.
Safety lock function
Disconnect the security lock, "E7" shows on the screen. The treadmill stops immediately, and a
beep sound is let out. Put the safety key back, all the data will be cleared in 2 seconds.
Key function
Start button, Stop button
When the power is on, press the start button to start the treadmill. Stop key: when the treadmill is in
running state, press the stop button, all data will be cleared, and the treadmill gradually comes into a
complete stop and returns to the manual mode.
Program key
In standby mode, pressing this key can cycle the options from manual mode to P1 to P12 automatic
programs. Manual mode is the system defaulting running mode.
Mode key
In standby mode, press this key can cycle the options of 3 different countdown running modes.
Speed + - key
Use these keys to adjust the speed of the treadmill. Press + to increase the speed and press - to
decrease the speed.
Display Function
Speed Display
Display the current running speed value.
Time Display
Display the time of manual mode and the countdown time under automatic modes and programs.
Distance display
Display cumulative distance under manual mode and programs. Display the distance countdown in
automatic mode.
Calorie display
Display cumulative calorie under manual mode and programs. Display the calorie countdown in
automatic mode.
Heart rate display
Heart rate signal will be detected, and the heart-shaped mark flashes while testing.
Heart rate measure function
In the case that the treadmill is energized, hold the heartbeat sensor piece for 5 seconds, and the
heart rate will be shown on the screen. The heart-shaped mark flashes while testing.
This data is for reference only, it cannot be considered as medical data.

11
Automatic program
Time
Program
Set time / 10 = Running time of each period
1
2
3
4
5
6
7
8
9
10
P1
SPEED
3
3
6
5
5
4
4
4
4
3
P2
SPEED
3
3
4
4
5
5
5
6
6
4
P3
SPEED
2
4
6
8
7
8
6
2
3
2
P4
SPEED
3
3
5
6
7
6
5
4
3
3
P5
SPEED
3
6
6
6
8
7
7
5
5
4
P6
SPEED
2
6
5
4
8
7
5
3
3
2
P7
SPEED
2
9
9
7
7
6
5
3
2
2
P8
SPEED
2
4
4
4
5
6
8
8
6
2
P9
SPEED
2
4
5
5
6
5
6
3
3
2
P10
SPEED
2
5
7
5
8
6
5
2
4
3
P11
SPEED
2
5
6
7
8
9
10
5
3
2
P12
SPEED
2
3
5
6
8
6
9
6
5
3
Translation of Error Codes
Error Code
Description
Check and solution
E1
Communication Abnormal:
when the power is on, the
connection between lower
controller and the console is
abnormal.
Check the cable connection between the console and the control
border to ensure that each core is fully plugged in. Replace the
connection cable if it is damaged.
E2
No detection of motor
Possible Cause:
Check the motor cable to see whether it is connected well or not,
if not, connect the motor wire again.
Check the motor cable, replace it if it is damaged or has a burnt
smell.
E5
Over current protection:
In working, the lower
controller detects the current
to be over 6A for more than
3 seconds.
Possible Cause:
Overloading leads to excessive current, and the system stops out of
self-protection, or some part is stuck, causing the motor to stop.
Adjust the treadmill and restart it. Check if there is liquid or burnt
smell while the motor is running, if yes, replace the motor; check if
the controller has a burnt smell, if yes, replace the controller; check
the power supply voltage, if it does not match the specifications,
change into correct voltage and test the machine again.

12
E6
Explosion-proof impact
protection: the abnormal
voltage or motor cause the
faulty of circuit that drive the
motor.
Possible Cause:
Check if the power supply voltage is 50% lower than normal voltage
，use the correct voltage and test the machine again；checkif the
controller has a burnt smell and replace the controller; Check if the
motor cable is connected and connect the motor wire again.
E7
No safety key
Put the safety key on the right place.
5. Routine Maintenance and Instructions
Warning: Before cleaning or maintaining products, please be sure the power plug of the
treadmill is pulled out.
Cleaning: Comprehensive cleaning will extend the using life of the electric treadmill.
Remove dust periodically in order to keep the parts clean. Be sure to clean running belt with both
sides of the exposed portion, which will reduce the accumulation of impurities. Make sure to wear
clean athletic shoes to avoid carrying the dirty matters into running board and belt. Treadmill belts
shall be cleaned by a damp cloth with soap. And please pay attention to avoid to wet the electrical
components and running belt.
Warning: Make sure power plug disconnect before moving motor cover away, clean the motor at
least once a year.
Running belt specialized lubricant
This electric treadmill’s running board and running belt has been lubricated in factory. Friction
between the running belt and running board has a great influence to the using life and the performance
of the electric treadmill, therefore regular applying of lubricant is needed. We advise you to check
the board regularly. If the board’s surface is damaged, please contact our customer service center.
We advise using lubricant between running belt and running board with following schedule:
Lightweight user (use less than 3 hours a week) once per month;
Heavyweight use (use more than 7 hours a week) once every half month.
1.In order to better safeguard your electric treadmill and extend the life of the machine, it is
recommended that after your continued use of two hours, turn off the machine and let it rest for 10
minutes before using again.
2.If the treadmill belt is too loose, there will be skid phenomenon’s while running; if it’s too tight, it
may reduce motor performance and harden the abrasion of roller and the running belt. You can lift
two sides of the running belt for 50-75mm when the tightness is appropriate.
Running with adjusted alignment and tightness
In order to better use the treadmill and make the treadmill functions work better, it is necessary for
you to adjust the running belt into the best condition.
Running Belt alignment
⚫Put electric treadmill flat on the ground.
⚫Make the treadmill run at a speed of about 6-8km/hour.
⚫If the running belt is closer to the right, rotate the right adjusting bolt with 1/2 turn clockwise,

13
then rotate the left adjusting bolt with 1/2 turn counter-clockwise. (Picture B)
⚫If the running belt is closer to the left, rotate the left adjusting bolt with 1/2 turn clockwise, then
rotate the right adjusting bolt with 1/2 turn counter-clockwise. (PictureA)
Picture A Picture B
Multi-wedge Belt Tension Adjusting
When you use the treadmill for a long time, the multi-wedge belt becomes loose because of the
abrasion, then you have to do some appropriate adjustment to facilitate the safe use.
Judgment: the feeling of running with the occasional pause phenomenon, which indicating that the
treadmill belt or multi-wedge belt are a little loose and further affirmation need to be made.
Method of judging which part is loose: Remove the four screws on protective cover, make the
treadmill run at a speed of 1 km/h, and then stand on the running belt, grip the armrests, and tread the
treadmill belt slightly. (We advise treading the treadmill belts with the user's own weight)
A. The instantaneous step cannot stop the belt, the tightness is appropriate.
B. If your instantaneous step stops the running belt, but the multi-wedge belt and former roller is still
running, it indicates that the running belt is loose and appropriate adjustments must be made to
facilitate the safe use
C. If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt stop, but
the motor is still running, it indicates that the multi-wedge belt is loose and appropriate adjustments
must be made to facilitate the safe use.
Step 2: Use a wrench to adjust the screws on the motor base according the condition. Meanwhile,
gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too loose, you can
flip the multi-wedge belt by 100%; if it is too tight, the degree for you to flip the belt is very limited.
It is appropriate to flip the multi-wedge belt by 80% after adjustment. Please adjust the tightness of
the multi-wedge belt into the state that it could be flipped by 80%.
Step 3: Finally lock the motor base, and install the front cover.
Silicone oil using method:
Before using the treadmill, please lubricate the treadmill with the method below:
A. Open the lubrication cover on the motor cover
B. Squeeze the silicon oil into the oil tank of treadmill. Please make sure the oil doesn’t surpass the
90ml scale, otherwise the oil will leak out. Then put the lubrication cover back.
90ml Scale

14
Scan QR code below to download cultsport APP
cultsport tracks your Health data by connecting to your health equipment and The cultsport App
tracks Exercise (steps), Calories burnt and Sleep besides other health data. We connect to most
fitness bands so our customers do not need to invest on another product. cultsport certified panel
of Nutritionists will interact (speak) and build customized plans for each customer.
Our certified panel of Fitness Experts will build customized plans of each customer based on their
equipment and age/health. We keep all your data in one place- on the cultsport app so that it canbe
referenced by you, your Coach or medical practitioner.
Scan QR code below to download cultsport play APP
Cultsport play combines the fun of video games with the intensity of serious workouts, helping
you achieve your fitness goal. Pair a cultsport play -supported Treadmill to our app, and get
started today
Customer Care Support
Write to us: sup[email protected]m
Web site: www.cultsport.com
Contact Number: 1800-572-6303/1800-572-6402
Customer Support: Monday to Saturday - From 09:00 AM- 06:00 PM