FlashLogic FLRSCH7 User manual

REVISION DATE
20141105
DOCUMENT NUMBER
NOTICE The manufacturer will accept no responsability for any electrical
damage resulting from improper installation of this product, be that either
damage to the vehicle itself or to the installed device. This device must be in-
stalled by a certified technician. Please review the Installation Guide carefully
before beginning any work.
BEFORE INSTALLATION
1- Connect module to computer
2- Login to Weblink account
3- Flash firmware to module (module is not preloaded with firmware)
4- Use accessories accordingly (accessories are sold separately)
U.S. Patent No. 8,856,780
INSTALL GUIDE
FLCCHRSCH8FLRSCH7EN
HARDWARE
FLRSCH7
FIRMWARE
FLCCHRSCH8FLRSCH7
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
ACCESSORIES
FLPROG REQUIRED
FLRF1/2/4 OPTIONAL
CARLINK ASCL2 OPTIONAL
17441

U.S. Patent No. 8,856,780
VEHICLE LIST - 1 OF 1
MAKE MODEL YEAR INSTALL TYPE
FEATURES
DATA IMMOBILIZER BYPASS DOOR LOCK DOOR UNLOCK ARM OEM ALARM DISARM OEM ALARM TRUNK/HATCH RELEASE DOOR STATUS OUTPUT TRUNK STATUS OUTPUT BRAKE PEDAL STATUS OUTPUT TACHOMETER OUTPUT SECURE TAKEOVER GLOW PLUGS STATUS RAP SHUTDOWN CTRL
DODGE
Dart STD key (Tip-Start) AT (without Autolight) 13 1 • • • • • • • • • • • •
Dart STD key (Tip-Start) AT (with Autolight) 13 2 • • • • • • • • • • • •
RAM
1500 STD key (Tip-Start) AT 13-14 3 • • • • • • • • • •
1500 Diesel STD key (Tip-Start) AT 14 3 • • • • • • • • • • •
2500 / 3500 STD key (Tip-Start) AT 13-14 3 • • • • • • • • • •
2500 / 3500 Diesel STD key (Tip-Start) AT 14 3 • • • • • • • • • • •
NOTE
I WARNING: All vehicle doors must be
closed and locked prior to remote start
sequence.
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 2 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
BOX CONTENTS - 1 OF 1
VS2VS2
VS1VS1
MS1MS1
MS2MS2
3
6
4
1
2
5
C
B
A
F
G
E
D
7
9
3
10
8
11
13
14
12
15
17
18
19
20
16
6
4
1
2
5
7
9
3
10
8
11
12
6
4
1
2
5
2
1
3
7
9
3
10
8
6
4
12
5
2
1
3
4
2
1
3
4
BOX CONTENTS
T-HARNESS 1
AFTERMARKET HOOD SWITCH AND CABLE
WARNING STICKER
10 PIN CONNECTOR
12 PIN CONNECTOR
BLUE
PROGRAMMING
BUTTON
LED 2
LED 1
MODULE
BLACK
BLACK
BLACK
RF PORT/
WEBLINK PORT
BLACK
BLUE
TELEMATIC
PORT
WHITE
WEBLINK CABLE (required accessory sold separately)
WEBLINK CABLE
COMPUTER
USB PORT
4 PIN BLACK CABLE
MODULE
WEBLINK PORT
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 3 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 4 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
COMPATIBLE ACCESSORIES - 1 OF 1
FLRF1/2/4 RF KIT
RF KIT (accessories sold separately)
(NC)
ANTENNA
MODULE
RF PORT
FLHRNTM
TELEMATIC KIT (accessories sold separately)
(NC)
CARLINK
MODULE
TELEMATIC PORT
10 11 12 13 14 15 16
12345678
9
FLHRNTM
TELEMATIC KIT (accessories sold separately)
MODULE
TELEMATIC PORT
CAR CONNECTIONPN 4120260 OBDII CONNECTOR
VEHICLE
OBDII PORT
(NC)
DOC.: #17441

U.S. Patent No. 8,856,780
TYPE 1 - WIRE CHART - 1 OF 1
MAKE MODEL YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR
DODGE
Dart
STD key
AT
(without
Autolight)
13
12V ~ White 06 pin 06 Red (+) Ignition connector F
Ground ~ White 06 pin 03 Black (-) Ignition connector F
Ignition ~ White 06 pin 04 Purple/Brown (+) Ignition connector F
Imo Lin ~ White 06 pin 05 White/Green (DATA) Ignition connector F
CanH ~ Black 16 pin 06 Gray/White (DATA) OBDII connector ~
CanL ~ Black 16 pin 14 Yellow (DATA) OBDII connector ~
Parking Light ~ Black 06 pin 03 White/Brown (MUX) Parking light switch A
Rap Shutdown ~ ~ ~ ~ Purple (-) Driver kick panel harness B
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 5 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
MS1MS1
MS2MS2
A
B
7
9
3
10
8
11
13
14
12
15
17
18
19
20
16
6
4
1
2
5
3
6
4
1
2
5
C
7
9
3
10
8
11
12
6
4
1
2
5
OBDII
C
10 11 12 13 14 15 16
1234567 8
9
VS2VS2
VS1VS1
A1
A2
B
2 K
12
3456
D
7
9
3
10
8
6
4
1
2
5
C
B
A
F
G
E
D
CANL - 14
PARKING LIGHT (MUX) - 03
RAP SHUTDOWN (-)
HORN (-)
CANH - 06
02 GRAY - RAP SHUTDOWN (-) OUTPUT
TYPE 1 - WIRING DIAGRAM - 1 OF 1
OBDII CONNECTOR
PARKING LIGHT SWITCHPARKING LIGHT SWITCH
MODULE
11 GRAY/GREEN - HORN (-) OUTPUT
OPTIONAL
BROWN/RED
BROWN/YELLOW
WHITE/BLACK - GROUND (-)
WHITE/BROWN (NC)
WHITE/RED (NC)
WHITE
DRIVER KICK PANEL
HARNESS
BLACK
IGNITION CONNECTOR
IGNITION HARNESS
IGNITION NODE
AFTERMARKET HOOD SWITCH (-)
04 GRAY/WHITE - HOOD STATUS (-) INPUT
WITHOUT OEM HOOD SWITCH:
INSTALL AND CONNECT TO
AFTERMARKET HOOD SWITCH
TELEMATIC PORT
RF PORT/WEBLINK PORT
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 6 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
TYPE 2 - WIRE CHART - 1 OF 1
MAKE MODEL YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR
DODGE
Dart
STD key
AT
(with
Autolight)
13
12V ~ White 06 pin 06 Red (+) Ignition connector F
Ground ~ White 06 pin 03 Black (-) Ignition connector F
Ignition ~ White 06 pin 04 Purple/Brown (+) Ignition connector F
Imo Lin ~ White 06 pin 05 White/Green (DATA) Ignition connector F
CanH ~ Black 16 pin 06 Gray/White (DATA) OBDII connector ~
CanL ~ Black 16 pin 14 Yellow (DATA) OBDII connector ~
Parking Light ~ Black 06 pin 03 White/Brown (MUX) Parking light switch A
Rap Shutdown ~ ~ ~ ~ Purple (-) Driver kick panel harness B
Autolight Off ~ Black 06 pin 06 White/Yellow (MUX) Parking light switch A
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 7 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
MS1MS1
MS2MS2
A
B
7
9
3
10
8
11
13
14
12
15
17
18
19
20
16
6
4
1
2
5
3
6
4
1
2
5
C
7
9
3
10
8
11
12
6
4
1
2
5
OBDII
C
10 11 12 13 14 15 16
1234567 8
9
VS2VS2
VS1VS1
A1
A2
B
1000 OHMS
12
3456
D
7
9
3
10
8
6
4
1
2
5
C
B
A
F
G
E
D
IGNITION CONNECTOR
IGNITION HARNESS
CANL - 14
PARKING LIGHT (MUX) - 03
AUTOLIGHT OFF - 06
RAP SHUTDOWN (-)
HORN (-)
CANH - 06
02 GRAY - RAP SHUTDOWN (-) OUTPUT
TYPE 2 - WIRING DIAGRAM - 1 OF 1
IGNITION NODE
OBDII CONNECTOR
PARKING LIGHT SWITCHPARKING LIGHT SWITCH
MODULE
11 GRAY/GREEN - HORN (-) OUTPUT
OPTIONAL
BROWN/RED
BROWN/YELLOW
WHITE/BLACK - VEHICLE SIDE
WHITE/BROWN (NC)
WHITE/RED - CONNECTOR SIDE
WHITE
DRIVER KICK PANEL
HARNESS
BLACK
AFTERMARKET HOOD SWITCH (-)
04 GRAY/WHITE - HOOD STATUS (-) INPUT
WITHOUT OEM HOOD SWITCH:
INSTALL AND CONNECT TO
AFTERMARKET HOOD SWITCH
TELEMATIC PORT
RF PORT/WEBLINK PORT
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 8 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
TYPE 3 - WIRE CHART - 1 OF 1
MAKE MODEL YEAR WIRE DESCRIPTION CONNECTOR NAME CONNECTOR COLOR CONNECTOR TYPE POSITION WIRE COLOR POLARITY MODULE LOCATION COMPONENT LOCATOR
RAM
1500 /
1500 Diesel
STD key
AT
13-14
12V D2664A Black 06 pin 06 Red (+) Ignition connector F
Ground D2664A Black 06 pin 03 Black (-) Ignition connector F
Mux D2664A Black 06 pin 04 Purple/Brown (+) Ignition connector F
Ignition ~ Gray 04 pin 02 Pink/Green (+) Trailer pack connector, right of steering ~
Imo Lin D2664A Black 06 pin 05 White/Green (DATA) Ignition connector F
CanH D7405A Black 16 pin 06 Gray/White (DATA) OBDII connector ~
CanL D7405A Black 16 pin 14 Yellow (DATA) OBDII connector ~
Parking Light D2242A Black 10 pin 01 White/Brown (MUX) Parking light switch A
Rap Shutdown ~ ~ ~ ~ Purple (-) Driver kick panel harness B
2500 /
2500 Diesel /
3500 /
3500 Diesel
STD key
AT
13-14
12V D2664A Black 06 pin 06 Red (+) Ignition connector F
Ground D2664A Black 06 pin 03 Black (-) Ignition connector F
Mux D2664A Black 06 pin 04 Purple/Brown (+) Ignition connector F
Ignition ~ Gray 04 pin 02 Pink/Green (+) Trailer pack connector, right of steering ~
Imo Lin D2664A Black 06 pin 05 White/Green (DATA) Ignition connector F
CanH D7405A Black 16 pin 06 Gray/White (DATA) OBDII connector ~
CanL D7405A Black 16 pin 14 Yellow (DATA) OBDII connector ~
Parking Light D2242A Black 10 pin 01 White/Brown (MUX) Parking light switch A
Rap Shutdown ~ ~ ~ ~ Purple (-) Driver kick panel harness B
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 9 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
MS1MS1
MS2MS2
A
B
7
9
3
10
8
11
13
14
12
15
17
18
19
20
16
6
4
1
2
5
3
6
4
1
2
5
C
7
9
3
10
8
11
12
6
4
1
2
5
OBDII
C
10 11 12 13 14 15 16
1234567 8
9
VS2VS2
VS1VS1
A1
A2
12345
6 7 8 9 10
B
D
7
9
3
10
8
6
4
1
2
5
C
B
A
F
G
E
D
CANL - 14
PARKING LIGHT (MUX) - 01
RAP SHUTDOWN (-)
HORN (-)
CANH - 06
02 GRAY - RAP SHUTDOWN (-) OUTPUT
TYPE 3 - WIRING DIAGRAM - 1 OF 1
OBDII CONNECTOR
PARKING LIGHT SWITCHPARKING LIGHT SWITCH
MODULE
11 GRAY/GREEN - HORN (-) OUTPUT
OPTIONAL
BROWN/RED
BROWN/YELLOW
WHITE/BLACK (NC)
WHITE/BROWN
WHITE/RED (NC)
WHITE (NC)
BLACK
DRIVER KICK PANEL
HARNESS
IGNITION CONNECTOR
IGNITION HARNESS
IGNITION NODE
AFTERMARKET HOOD SWITCH (-)
04 GRAY/WHITE - HOOD STATUS (-) INPUT
WITHOUT OEM HOOD SWITCH:
INSTALL AND CONNECT TO
AFTERMARKET HOOD SWITCH
TELEMATIC PORT
RF PORT/WEBLINK PORT
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 10 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
01
02
03
04
OFF
ACC ON
START
05
06
OFF
ACC ON
START
07
OFF
ACC ON
START
08
OFF
ACC ON
START
09
OFF
ACC ON
START
10
11
OFF
ACC ON
START
12
13
14
15
OFF
ACC ON
START
16
17
OFF
ACC ON
START
18
OFF
ACC ON
START
MODULE PROGRAMMING PROCEDURE - 1 OF 2
Close driver door. Re-open driver door to wake
up data bus.
Press Unlock on OEM remote. If the vehicle is
not equipped with an OEM remote, press the
module programming button.
Wait, LED will flash GREEN once [1x].
Turn key to ON position.
Wait, LED will turn solid RED.
Turn key to OFF position.
Remove key.
Insert key into ignition.
Turn key to ON position.
Wait, LED will flash GREEN.
Turn key to OFF position.
WARNING: Disconnect power last. Disconnect
module from vehicle.
Connect module to computer and proceed
with extended programming.
WARNING: Do not press module programming
button. Connect power first. Connect module
to vehicle.
Turn key to ON position.
Wait, LED will turn solid GREEN for 2 seconds.
Turn key to OFF position.
Turn key to START position.
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 11 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
19
OFF
ACC ON
START
20
MODULE PROGRAMMING PROCEDURE - 2 OF 2
Turn key to OFF position.
Module Programming Procedure completed.
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 12 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
>>
01
OFF
ACC ON
START
02
03
OFF
ACC ON
START
OFF
5x
04
05
OFF
ACC ON
START
06
OFF
ACC ON
START
07
>>
VALET MODE PROGRAMMING PROCEDURE - 1 OF 1
NOTE: In Valet Mode, the Remote starter is not
functional. Keyless entry, Lock and Unlock will
remain functional. See RF kit user manual for
alternate valet mode programming.
Insert key into ignition.
Time restriction. Complete next step within 7
seconds.
Turn key to OFF position then to ON position
five times [5x] rapidly.
Wait, LED 1 will turn solid RED for 2 seconds.
Turn key to OFF position.
Remove key.
Valet Mode Programming Procedure
completed.
To exit valet mode: repeat steps 1 to 6.
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 13 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
AFTERMARKET REMOTE PROGRAMMING - 1 OF 1
AFTERMARKET REMOTE PROGRAMMING:
NOTES
I All aftermarket remotes must be programmed to the
RF-Kit.
Refer to the RF-Kit user guide for aftermarket remote
features and programming procedures.
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 14 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
>>
>>
>>
01
OFF
ACC ON
START
02
03 [X]
04
05 [Y]
06
07 [Z]
08 [Z]
09
10
11 [Y]
12
13
14
>>
MODULE NAVIGATION PROCEDURE - 1 OF 1
It is mandatory to exit the Module Navigation
at the end of this procedure. Failure to exit the
Module Navigation will drain vehicle battery.
To exit the Module Navigation at any time:
Follow STEP 13.
Module must be programmed to the vehicle.
Use the Module Navigation Chart on the next
page.
Set ignition to OFF position.
TO ACCESS THE MENUS: Press and hold
programming button until LED 1 turns solid
GREEN.
IN THE MENUS: Press the programming
button as many times as the menu number
indicates. LED 1 will flash GREEN an equal
amount of times continuously.
TO ACCESS THE OPTIONS: Press and hold
programming button until LED 1 turns solid
RED.
IN THE OPTIONS: Press the programming
button as many times as the option number
indicates. LED 1 will flash RED an equal
amount of times continuously.
TO ACCESS THE SETTINGS: Press and hold
programming button until LED 1 turns solid
GREEN.
LED 1 will flash GREEN as many times as
the current (or default) setting number,
continuously.
IN THE SETTINGS: Press the programming
button as many times as necessary to access
your setting. LED 1 will flash GREEN an equal
amount of times continuously.
To return to the MENUS: exit the Module
Navigation and redo the Module Navigation
Procedure.
To save and return to the OPTIONS: Press and
hold programming button until LED 1 turns
solid RED.
LED 1 will flash RED as many times as the
current option number continuously.
Configure every other setting and proceed to
step 13.
MANDATORY: EXIT MODULE NAVIGATION.
Press and hold programming button for 7
seconds. LED 1 will flash RED rapidly. Release
programming button. LED 1 will turn OFF.
Module navigation completed.
Failure to exit the Module Navigation will drain
vehicle battery.
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 15 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
MODULE NAVIGATION CHART - 1 OF 2
MODULE NAVIGATION CHART:
NOTES
[X] MENUS [Y] OPTIONS [Z] SETTINGS
I Default settings are listed in bold.
01 CONFIGURATION
01 DISARM/UNLOCK BEFORE START 01 OFF
II Make sure the option is covered on the vehicle before
attempting to change the setting.
02 ON
02 RELOCK AFTER START 01 OFF
02 ON
03 RELOCK AFTER SHUTDOWN 01 OFF
02 ON
04 FORCE UNLOCK ALL ON FIRST PRESS 01 OFF
02 ON
05 TAKEOVER 01 ENABLE
02 DISABLE*
06 N/A 01 N/A
07 N/A 01 N/A
08 MODULE RUN TIME
01 03 MIN
02 05 MIN
03 10 MIN
04 15 MIN
05 25 MIN
06 30 MIN
07 35 MIN
08 15 MIN
09 WAIT TO START DELAY
01 02 SEC
02 05 SEC
03 08 SEC
04 10 SEC
05 15 SEC
06 20 SEC
07 25 SEC
08 30 SEC
10 N/A 01 N/A
11 N/A 01 N/A
12 N/A 01 N/A
13 N/A 01 N/A
*Vehicle will shutdown when a door is opened.
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 16 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
MODULE NAVIGATION CHART - 2 OF 2
MODULE NAVIGATION CHART:
NOTES
[X] MENUS [Y] OPTIONS [Z] SETTINGS
01 CONFIGURATION
14 HORN EVENT TRIGGER
01 DOUBLE LOCK
02 LOCK + UNLOCK
03 LOCK + UNLOCK + START
04 DOUBLE LOCK + START
15 HORN CHIRPS WIDTH
01 30 mSEC
02 15 mSec
03 60 mSec
02-07 Technical Support only 01 N/A 01 N/A
*Vehicle will shutdown when a door is opened.
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 17 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
REMOTE STARTER ERROR CODES - 1 OF 1
REMOTE STARTER ERROR CODES:
NOTES
[X] NUMBER OF PARKING LIGHT FLASHES DIAGNOSTIC
I WARNING: The following applies only when the parking
lights are connected and supported by the system.
03 Foot brake is ON.
04 Hood is open.
II After a remote starter failure, the parking lights will fl ash
[X] number times to indicate an error code. See table.
05 Engine tach signal is lost.
06 System is in Valet Mode.
07 Vehicle is moving (VSS).
08 Glow plug timeout error.
09 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.
10 N/A
11 N/A
12 N/A
13 N/A
14 N/A
15 N/A
16 CAN communication failure during RS sequence.
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 18 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
MODULE DIAGNOSTICS - 1 OF 1
TEST MODULE
LED 1 STATUS DIAGNOSTIC
I DURING PROGRAMMING
Flashing RED Missing/wrong information from firmware or vehicle.
Solid RED Module waiting for more vehicle information.
Flashing GREEN Additional steps required to complete module programming.
Solid GREEN then OFF Module correctly programmed.
OFF No activity or module already programmed.
II DURING REMOTE START
Flashing RED Module incorrectly programmed.
Solid RED Module incorrectly programmed.
Flashing GREEN Module correctly programmed and operational.
Solid GREEN then OFF Reset in progress.
OFF Invalid ground when running status from remote starter.
III WITH IGNITION OFF
Flashing RED Module incorrectly programmed or connected.
Solid RED Module not programmed. Waiting for more vehicle information.
Flashing GREEN False ground when running status from remote starter.
Solid GREEN then OFF Reset in progress.
OFF Module at rest and ready for a remote start sequence.
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 19 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441

U.S. Patent No. 8,856,780
01
02
03
04
05
06
07
08
>>
MODULE RESET PROCEDURE - 1 OF 1
Disconnect all connectors from module except
the BLACK 20-PIN connector.
Disconnect the BLACK 20-PIN connector.
PRESS AND HOLD programming button while
connecting the BLACK 20-PIN connector.
Wait, LED 1 will flash RED. RELEASE
programming button.
LED 1 will turn RED for 2 seconds.
Module RESET completed.
Reconnect all connectors.
Repeat programming procedure.
Failure to follow procedure may result with a
DTC or a CHECK ENGINE error message.
www.flashlogic.comAutomotive Data Solutions Inc. © 2014
PAGE 20 OF 22
• 20141105
FLCCHRSCH8FLRSCH7EN
DOC.: #17441