Flashtech FT-RGB-RF-Controller User manual
NAME: Flashtech Wireless (RF) RGB Controller Installation Guide
MODEL: F -RGB-RF-Controller
Summarization
Flashtech Wireless (RF) RGB Controller is a versatile unit that is used for controlling a variety of LED Light
sources. It can e used with Flashtech: RGB Halos, RGB Flexi le light strips, and RGB under Glow Light
kits. All options can e controlled via the wireless (RF) remote or from the actual control module itself. In
addition the control module has three led’s that light up and or flash depending on exactly what mode has
een selected. This allows the user to e a le to mount the controller inside the vehicle and see what options
are eing selected without having to view the actual light source!
echnical Parameters
● Working temperature: -4 - 140 F
● Supply voltage: DC12V
● Output: 3 channels
● Connecting mode: common anode
● External dimension: L121ΧW53ΧH25 mm
● Packing size: L150ΧW76ΧH51 mm
● Net weight: 9oz
● Gross weight: 10oz
● Static power consumption: <1W
● Output current: <4A(each channel)
● Output power: 12V:<144W,
Page 1 of 3
External Dimension
Interface Specifications
Power input interface:
Positive and negative wires are connected directly to a 12v DC power source. In most cases this would e
your vehicle attery.If this item is eing used for home or commercial use it first must e connected to a 12v
dc power inverter.
Load output interface:
Connect each color wire directly to the appropriate screw,
BLACK wire→V + RED wire→R GREEN wire→G BLUE wire→B
•WARNING : If using this controller with Flashtech Halos, the green and blue wires may have to
be switched for proper utilization. If the controller does not function properly with the Green
wire attached to “G” and the Blue wire attached to “B”, switch them (Green wire → B ; Blue
Wire → B).
Direction for use
1. Connect the load wire first, following y the power wire; Please ensure short circuit cannot
occur etween connecting wire efore you turn on the power;
2. Below is the function of each utton. The function of each key is as follows:
(1): you can turn on/off controller at any time
(2): Play/pause utton, it is used to see the static effect of a led mode.
S(3)+: Changes the speed higher of a particular mode. One degree for every time you press
S-(4): Changes the speed lower of a particular mode. One degree for every time you press
B+(5): Changes the Brightness higher. One degree for every time you press
B-(6): Changes the Brightness lower. One degree for every time you press
M+(7): Changes the pattern forward (form elow shows each option)
M-(8): Changes the pattern ackwards (form elow shows each option)
3. All 25 option on the controller are listed elow
No. Patterns Remarks No. Patterns Remarks
1 Static red 14 Blue flash
Page 2 of 3
Brightness is
adjusta le, Speed is
not adjusta le.
Speed and
Brightness
are adjusta le
2 Static green 15 Purple flash
3 Static lue 16 Green flash
4 Static yellow 17 Yellow flash
5 Static purple 18 Cyan flash
6 Static cyan 19 White flash
7 Static white 20 R/B crossfade
Speed is
adjusta le,
rightness is
not adjusta le
8 Three-color
changing
Speed and
rightness are
adjusta le
21 B/G crossfade
9 Seven-color
changing
22 G/R crossfade
10 Three-color
gradual changing
Speed is adjusta le,
rightness is not
adjusta le
23 Fade out and Fade
in
11 Seven-color
gradual changing
24 Random flashing
12 Three-color
running
Speed and
Brightness
are adjusta le
25 AUTO Mode 1 - 24
13 Red flash
ypical Application
Page 3 of 3
SIGNAL
POWER
B
G
R
S-
S+
M-
M+
B-
B+
8-key controller
power supply
AC220V
DC12V
+
-
load
power
+
RGB
