Smartgen FPC1700 User manual

FPC1700
JOCKEY PUMP CONTROLLER
USER MANUAL

FPC1700 Jockey Pump Controller User Manual Page 2 of 17
CONTENTS
1 OVERVIEW............................................................................................................................................ 5
2 CHARACTERISTICS AND PERFORMANCE......................................................................................... 5
3 SPECIFICATION ................................................................................................................................... 6
4 OPERATION.......................................................................................................................................... 7
4.1 INDICATORS DESCRIPTION .......................................................................................................... 7
4.2 KEYS FUNCTIONS.......................................................................................................................... 8
5 LCD DISPLAY ....................................................................................................................................... 8
5.1 MAIN DISPLAY ............................................................................................................................... 8
5.2 STATUS DESCRIPTION.................................................................................................................. 9
5.3 MAIN MENU ................................................................................................................................. 10
6 PARAMETER SETTING ...................................................................................................................... 10
6.1 SETTING INSTRUCTIONS............................................................................................................ 10
6.2 PARAMETER CONFIGURATION TABLE...................................................................................... 10
6.3 FUNCTION DESCRIPTION FOR DIGITAL INPUT PORTS............................................................ 13
6.4 FUNCTION DESCRIPTION FOR DIGITAL OUTPUT PORTS ........................................................ 13
7 OPERATIONS ..................................................................................................................................... 13
7.1 OFF MODE .................................................................................................................................... 13
7.2 AUTO MODE ................................................................................................................................. 13
7.3 MANUAL MODE............................................................................................................................ 14
8 TERMINAL DESCRIPTION ................................................................................................................. 14
9 TYPICAL APPLICATION .................................................................................................................... 15
10 INSTALLATION DIMENSIONS......................................................................................................... 16
11 TROUBLE SHOOTING ...................................................................................................................... 17

FPC1700 Jockey Pump Controller User Manual Page 3 of 17
Registered trademark
No.28 Xuemei Street, Zhengzhou, Henan, China
Tel: [phone]
[phone](overseas)
Fax: [phone]
Email: [e-mail]
Web: www.smartgen.com.cn
www.smartgen.cn
All rights reserved. No part of this publication may be reproduced in any material form (including
photocopying or storing in any medium by electronic means or other) without the written permission of
the copyright holder.
SmartGen reserves the right to change the contents of this document without prior notice.
Table 1 Software Version
Date
Version
Note
2023-10-31
1.0
Original release.

FPC1700 Jockey Pump Controller User Manual Page 4 of 17
Table 2 Notation Clarification
Sign
Instruction
NOTE
Highlights an essential element of a procedure to ensure correctness.
CAUTION!
Indicates a procedure or practice, which, if not strictly observed, could result in
damage or destruction of equipment.
WARNING!
Indicates a procedure or practice, which could result in injury to personnel or
loss of life if not followed correctly.

FPC1700 Jockey Pump Controller User Manual Page 5 of 17
1OVERVIEW
FPC1700 Jockey Pump Controller is composed of a microprocessor as the core, which can be
started/stopped according to the pipe pressure, stabilize the pipe pressure in the setting range and
detect the grid voltage to protect the abnormal voltage, realizing the automation and intelligent control
of the controller. It integrates LCD display and with good HMI function.
2CHARACTERISTICS AND PERFORMANCE
——1P2W, 3P3W and 3P4W system types are configurable;
——The LCD is 128x64 pixels with backlight, optional Chinese and English;
——With MCU smart accurate monitoring and control;
——With OFF/Auto/Manual modes;
——With over/under voltage, over/under frequency and reverse phase detection functions,
over/under voltage and frequency threshold values are available to set;
——The cut-in/cut-off pressure threshold values can be set;
——The pipe pressure sensor can be configured to resistance/current/voltage types, and can
customize the sensor curves;
——LCD can visually display the current pipe pressure, total running time, pump start times, AC
power status and alarm status;
——All the output ports are relay output;
——Working temperature range is (-25℃~+70℃), which can be used in the bad environments;
——Rubber seal designed between the enclosure and controller with protection level IP65;
——Modular design, anti-flaming ABS enclosure, pluggable terminals and built-in mounting with
compact structure and easy installation.

FPC1700 Jockey Pump Controller User Manual Page 6 of 17
3SPECIFICATION
Table 3 Specification Parameters
Item
Content
Working Voltage
AC power supply, applicable to AC24V system, the voltage range:
AC10V~AC30V
DC power supply, voltage range: DC8V~DC35V
Overall Consumption
≤1W (Standby)<0.5W
AC Voltage
1P2W (L-N)
AC30V~AC360V
3P4W (L-L)
AC50V~AC620V
3P3W (L-L)
AC50V~AC620V
Rated Frequency
Rated: 50/60Hz
Relay Output Capacity
8A AC250V Volts free output
Production Compliance
According to EN 61010-1 installation category (over voltage category) III,
300V, pollution class 2, altitude 3000m
Case Dimensions
95mmx86mmx46.5mm
Panel Cutout
78mmx66mm
Working Temperature
(-25~+70)˚C
Working Humidity
(20~95)%RH
Storage Temperature
(-30~+80)˚C
Protection Level
Front Panel: IP65, when waterproof gasket ring installed between control
panel and enclosure.
Back Panel: IP20
Insulation
Apply AC2.2kV voltage between high voltage terminal and low voltage
terminal. The leakage current is not more than 3mA within 1min.
Weight
0.16 kg

FPC1700 Jockey Pump Controller User Manual Page 7 of 17
4OPERATION
4.1 INDICATORS DESCRIPTION
Fig.1 Front Panel Indication
Table 4 Indicators Description
Indicator
Status Description
Alarm
Alarm on: light flashing
Alarm-free: light off
OFF Mode
Off mode: light on
Other mode: light off
Auto Mode
Auto mode: light on
Other mode: light off
Manual Mode
Manual mode: light on
Other mode: light off

FPC1700 Jockey Pump Controller User Manual Page 8 of 17
4.2 KEYS FUNCTIONS
Table 5 Keys Description
Icon
Key
Description
Page down
Press this key in main screen to scroll down;
Press this key to enter the menu and can move down the cursor or
decrease the value;
Press and hold on this key in custom curve interface to return to the list.
OFF
On home screen, short press to perform stop operation, long press to enter
the menu;
Press and hold on this key in parameter setting interface to return to home
screen.
Auto
Press this key to enter the auto mode.
Manual
Press and hold on this key to enter the manual mode, release it to switch to
OFF mode.
5LCD DISPLAY
5.1 MAIN DISPLAY
Table 6 Main Screen Display
Content
Description
The contents displayed on main screen when sensor is analog:
Pipe pressure value
The running status of jockey pump
Voltage status
The contents displayed on main screen when sensor is digital:
Pressure switch status
The running status of jockey pump
Voltage status
Phase voltage
Line voltage
Frequency
Current mode, alarm information

FPC1700 Jockey Pump Controller User Manual Page 9 of 17
Start times
Current running time
Total running time
Current mode, alarm information
Alarm screen
5.2 STATUS DESCRIPTION
Table 7 Warning Alarm
When controller detects that the warning alarm is active, the alarm indicator will flash, while the
alarm indicator will extinguish when the warning recovers, which means the warning alarm does not
latch. The pump start relay will stop output when controller detects the alarm.
No.
Status
Description
1
Sensor Open
Alarm when sensor is open.
2
Fault Input
Alarms when fault input is active.
3
Emergency Stop
Alarm when emergency stop input is active.
4
Blackout
The voltage is 0.
5
Over Voltage
The voltage is greater than the setting upper limit.
6
Under Voltage
The voltage is less than the setting lower limit.
7
Over Frequency
The frequency is greater than the setting upper limit.
8
Under Frequency
The frequency is less than the setting lower limit.
9
Loss of Phase
Loss of single- phase or 2-phase among A, B, C.
10
Reverse Phase
Sequence
Phase sequence wrong of A-B-C.

FPC1700 Jockey Pump Controller User Manual Page 10 of 17
5.3 MAIN MENU
Press and hold OFF key in main display screen to enter the main menu.
Table 8 Main Menu Display
Content
Description
Press to select the different parameter lines, and then press
to enter the corresponding display screen.
NOTE: Input password to enter parameter settings, default password "01234"; operator can change the password to
prevent others changing controller configurations. After change please remember clearly; If it is forgotten, please
contact company service personnel.
6PARAMETER SETTING
6.1 SETTING INSTRUCTIONS
Press and hold OFF key in home page to enter the menu, select “1. Parameter Setting”, then
press OFF key to confirm and enter the password confirmation interface. Input the correct
password to enter the parameter main interface, if the password is incorrect, exit and return to the main
screen, the factory default password is: 01234.
6.2 PARAMETER CONFIGURATION TABLE
Table 9 Parameter Setting Description
No.
Parameter
Default
Range
Description
1
Sensor Curve Type
1
(0-3)
0: Not used
1: Custom resistance curve
2: Custom 4-20 mA
3: Custom voltage curve
2
Open Action
0
(0-1)
0: Warn
1: No Action
3
Custom Curve
Content
4
Unit
0
(0-3)
0: kPa
1: bar
2: psi
3: MPa
5
Cut-out Pressure
1000 kPa
(0-9000) kPa
Shutdown when pipe pressure is greater
than the cut-out pressure threshold value.
6
3
(0-3600)s

FPC1700 Jockey Pump Controller User Manual Page 11 of 17
No.
Parameter
Default
Range
Description
7
Cut-in Pressure
600 kPa
(0-9000) kPa
Start when pipe pressure is less than the
cut-in pressure threshold value.
8
3
(0-3600)s
9
Normal Delay of
Power Supply
5s
(0-9999)s
10
Abnormal Delay of
Power Supply
5s
(0-9999)s
11
Start Delay
5s
(0-3600)s
The jockey pump runs when start delay is
over.
12
Stop Delay
5s
(0-3600)s
The jockey pump stops when stop delay is
over.
13
AC type
0
(0-2)
0: 3P4W
1: 1P2W
2: 3P3W
14
Reverse Phase
Sequence Enable
1
(0-1)
0: Disable
1: Enable
15
Rated Voltage
220V
AC(50-600)V
16
Over Volt. Enable
1
(0-1)
0: Disable
1: Enable
17
Over Volt. Setting
Value
120%
(100-200)%
18
Over Volt. Return
Value
115%
19
Under Volt. Enable
1
(0-1)
0: Disable
1: Enable
20
Under Volt. Setting
Value
80%
(70-200)%
21
Under Volt. Return
Value
85%
22
Rated Freq.
50.0Hz
(10.0-75.0) Hz
23
Over Freq. Enable
1
(0-1)
0: Disable
1: Enable
24
Over Freq. Setting
Value
110%
(80-200)%
25
Over Freq. Return
Value
104%
26
Under Freq. Enable
1
(0-1)
0: Disable
1: Enable
27
Under Freq. Setting
Value
90%
(80-200)%
28
Under Freq. Return
Value
96%
29
Language
0
(0-1)
0: Simplified Chinese
1: English

FPC1700 Jockey Pump Controller User Manual Page 12 of 17
No.
Parameter
Default
Range
Description
30
Password
1234
(1-65534)
31
Module Add.
1
(1-254)
32
Input Setting Type
2
(0-5)
0: Not used
1: Emergency stop
2: Start Inhibit
3: Low pipe pressure
4: Reserved
5: Reserved
33
Input Action Type
0
(0-1)
0: Close to be active
1: Open to be active
34
Output Setting
Type
1
(0-9)
0: Not used
1: Pump control output
2: Alarm output
3: OFF mode output
4: Auto mode output
5: Manual mode output
6: Reserved
7: Reserved
8: Reserved
9: Reserved
35
Output Action Type
0
(0-1)
0: Normally open output
1: Normally close output

FPC1700 Jockey Pump Controller User Manual Page 13 of 17
6.3 FUNCTION DESCRIPTION FOR DIGITAL INPUT PORTS
Table 10 Function Description for Input Port
No.
Input Ports
Description
0
Not used
The input port is inactive.
1
Emergency stop
The start relay will stop output when emergency input is active.
2
Start Inhibit
The start relay will stop output when the start input inhibit is
active.
3
Low pipe pressure
When sensor curve type is set to not used, the start relay will
output when low pipe pressure is active.
4
Reserved
Reserved
5
Reserved
Reserved
6.4 FUNCTION DESCRIPTION FOR DIGITAL OUTPUT PORTS
Table 11 Function Description for Output Port
No.
Output Ports
Description
0
Not used
The output port is inactive.
1
Pipe control output
The relay will output when starts or stops.
2
Alarm Output
The relay will output when alarms.
3
OFF Mode Output
The relay will output in OFF mode.
4
Auto Mode Output
The relay will output in Auto mode.
5
Manual Mode Output
The relay will output in Manual mode.
6
Reserved
保留 Reserved
7
Reserved
保留 Reserved
8
Reserved
保留 Reserved
9
Reserved
保留 Reserved
7OPERATIONS
7.1 OFF MODE
Press OFF key , the indicator light of OFF mode is illuminated and the controller is in OFF
mode.
In this mode, the pump controls the relay to stop output.
7.2 AUTO MODE
Press the Auto key , the indicator light of Auto mode is illuminated and the controller is in
Auto mode.
In this mode, when the AC power is normal, and the overload input/emergency stop input/start
inhibit is inactive, the relay outputs when the sensor pressure value is lower than low start threshold
value, and the pump controls relay to stop output when the value is higher than the start return
threshold value.

FPC1700 Jockey Pump Controller User Manual Page 14 of 17
7.3 MANUAL MODE
Press and hold the key, the indicator of manual status is illuminated and the controller is in
Manual mode.
In this mode, when the AC power is normal, and the overload input/emergency stop input/start
inhibit is inactive, the pump controls relay to continuously output.
8TERMINAL DESCRIPTION
Fig.2 Back Panel
Table 12 Table Terminal Description
No.
Item
Functions
Remark
1
Pump Output
Pump controls relay to output.
Capacity 8A AC250V volts free
output
2
3
NC
Null
4
GND
Common port
5
Pressure Sensor
Sensor input of pipe pressure
6
Fault Input
Overload of jockey pump
Connect to GND of input port is
active.
7
Aux. Input
Aux. input port
Connect to GND of input port is
active.
8
AC Power~24V
AC 24V power supply
9
10
Aux. Output
Aux. output port
Capacity 8A AC250V volts free
output
11
12
NC
Null
13
A
AC 3P4W voltage input
If it is single phase input, only
connect to A, N
14
B
15
C
16
N

FPC1700 Jockey Pump Controller User Manual Page 15 of 17
9TYPICAL APPLICATION
Fig.3 Typical Application Diagram of Single Phase Power Supply
Fig.4 Typical Application Diagram of 3-Phase Power Supply

FPC1700 Jockey Pump Controller User Manual Page 16 of 17
10 INSTALLATION DIMENSIONS
This control is panel built-in design, fix it by clips during mounting.
Unit: mm
Fig.5 Case Dimensions and Panel Cutout
Fig.6 Clips Installation

FPC1700 Jockey Pump Controller User Manual Page 17 of 17
11 TROUBLE SHOOTING
Table 13 Trouble Shooting
Symptom
Possible Solutions
Controller no response
Check AC power supply.
No output of relay
Controller alarm is available;
Unreasonable setting of cut-in/cut-out pressure threshold value;
The start inhibit of input port is active;
The working mode is on OFF mode.
_________________________________