Fleetwood Illusions 2.0 User manual

Illusions 2.0 Hutch Instructions
Page 1of 2
950780-INST
Rev. A
1. Place each hutch into position on top of
leveled base cabinets.
2. Align hutches and then clamp them together
to keep them in position for the remaining
steps.
3. Locate partially predrilled holes on end
panels. Use a 5/16" drill bit to drill (4) holes
through end panels of hutches to be joined.
4. Insert supplied connector bolts through
drilled holes to connect hutches.

Illusions 2.0 Hutch Instructions
Page 2of 2
950780-INST
Rev. A
For questions please call us at [phone]
5. With hutches in position, use a 9/64" drill bit
to drill into the base cabinet top through the
holes in the hutch plates.
6. Attach hutches to base cabinets using (8) #10
x .750" flathead wood screws. Tighten to a
torque of 30-35 in lbs.
7. If finished height of hutch is above 68” high, attach to wall per local codes and regulations.