Fleetwood Jamboree 1983 User manual

BYFLEETWaJO
1983

INTRODUCTION
Welcome to the recreational vehicle lifestyle and the grow-
ing family of motor home owners. We sincerely thank you
for choosing our product.
Your
motor home has been designed to provide you with
many years
of carefree, pleasant traveling and vacationing.
This manual describes many features
of your motor home
and provides a guide to operating procedures so that you can
obtain optimum performance from those features. Like
all
finely crafted equipment, your motor home will require care
and regular maintenance in order to retain its maximum
performance characteristics. This manual. along with
the
information provided in your Owner's Information Kit outlines
the important areas of maintenance and provides a mainten·
ance schedule that you should follow to assure safe, trouble-free
service from
your motor home. Study these instructions care-
fully. A good working knowledge of your motor home and
how to care for it will help you enjoy many miles of
recreational pleasure.
Your
motor home has been designed to conform with, or
exceed the American National Standards Institute Al19.2,
ANSI/NFPA 501 C, Canadian CSA Standard 2-240
(Canadian-built, or units built for Canada), and/or applicable
motor home vehicle standards. These standards establish the
plumbing, heating, electrical, and other requirements for
quality and safety. Compliance with these standards is
indicated by the seal attached just outside the entry door.
This seal
is the outward sign of internal quality.
The
motor home has been thoroughly inspected before ship-
ment. It is the duty of your dealer to inspect the motor home
and to prepare it for you during the predelivery phase of the
sale. He will instruct you in its basic use; however, this should
be supplemented by
your reading all instructional material
furnished with
the motor home. If, after taking delivery of
your new motor home, you feel it requires additional
conditioning or adjustment, please return it
to your dealer
as soon as possible.
If you have any questions regarding operation, maintenance,
or service, please contact your dealer immediately so he can
assist you. Your dealer's service
or sales department will
promptly handle any normal problem which might occur.
Customer service
is of utmost importance to your dealer,
as well as to the manufacturer. If, for some reason, a
problem
is not handled to your satisfaction, we make the
following suggestions:
1. Discuss any warranty-related problems directly with
the General Manager
or the Owner of the dealership,
giving him an opportunity
to help his service depart-
ment resolve the matter for you.
2. Should a problem arise that cannot be resolved to
your satisfaction by your local dealer, contact the
factory service supervisor. The back page of this
manual has a factory listing. Please
contact the one
nearest you.

IMPORTANT NOTICE 3.
If these efforts have not satisfactorily solved your
probiem, please send a letter describing the
ci rcumstances to: Fleetwood Enterprises, Inc.,
P. O. Box 7300, Riverside, California 92523.
PI
ease include the brand name and serial number
of your motor home.
4.
If
you wish to call for assistance, please use these
to II free telephone numbers:
From California: (800)
4424804
From Outside California: (800) 8544755
This instructional manual is of general nature
only. Because of the continuous program of
product improvement conducted by Fleet·
wood, it is possible that recent product
changes may not be included in this manual.
Specifications may change without notice.
The instructions included in this manual are
intended
as a guide, and in no respect 'extend
the responsibilities of Fleetwood Enterprises,
Inc., or its subsidiaries beyond the standard
written
warranty as presented in this manual.
Thank you for choosing our product. Your dealer and we,
the manufacturer, will continually strive to merit your
confidence.
In this manual, statements preceded by the
following words are of special significance:
NOTE: Some equipment and features described or shown in
this manual may be optional at extra cost.
"WARNING" means that there is the pos·
sibility
of personal injury to
yourself and others.
"CAUTION" means that there is the pos·
sibility
of damage to the
vehicle or its components.
"NOTE" indicates points of particular
interest for more efficient -and
convenient operation.
Please pay close attention to these statements
while you read this manual.
NOTE
This product is a recreational vehicle only. It
is not designed or intended to be used as
permanent housing.
NOTICE
Your selling dealer is responsible for performing a
complete predelivery inspection of the chassis and all
motor home components as specified in the predelivery
checklists supplied by Fleetwood and
the chassis
manufacturer. You should receive a copy of these
completed checklists from your dealer when your
motor home is delivered to you.
FRONT END ALIGNMENT
As a part of the predelivery inspection procedure, the
dealer is to road test the motor home, noting and
correcting any steering performance problems before
delivery to the retail customer.
Therefore, Fleetwood and its subsidiaries will not be
responsible for front end alignment after this required
predelivery inspection is made.
A FEW WORDS
ON ENERGY ........ .
To all of us who drive cars or trucks, or
heat and cool homes and businesses, very
little needs to be said about energy.
Discussions
of the topic often lead to the
question, "What can be done to save our
natural energy resources?" There is no
single simple answer. To some, energy-
efficiency is a problem. Fleetwood thinks
of energy conservation as an opportunity
to research new ideas, while giving you the
best in recreational living. Space-age
technology has given us lightweight, but
strong and attractive materials.
Sophisticated manufacturing techniques
offer the best in time and energy
management
to bring you a
motor home that has saved energy even
before you drive it away. It's "energy-
efficient engineering."
But we want you to be involved, too.
And to help you, we've included energy -.
saving tips throughout this Owner's
Manual. Whenever you see this symbol
take a second to read the few words beside
it.
Try these and other ideas to save energy.
And
then put the ideas to work. We're sure
you'll feel a lot better about your next outing.
Fleetwood is thinking about energy.
And
we're helping.

TABLE OF CONTENTS
PLANNING AND PREPARATION .................... 1
VEHICLE LOAD WEIGHING CAPACITY .............. 5
READY TO LEAVE
............................... 6
Starting and Warmup
............................. 6
Safety Belts .................................... 6
ON THE ROAD .................................. 7
Driving and Parking
.............................. 7
Miscellaneous
Safety Tips ......................... 7
Overheating
.................................... 8
Windshield Defrost -
Comfort Control ............... 8
12-Volt Fuse Replacement ........................ 8
Changing a Tire
................................. 8
Emergency
Start System (Optional) ................. 8
SERVICING ........................ '" ......... 10
Motor Home Chassis Operator's Manual ............. 10
Battery Service ................................ 10
Generator Power Plant System Service .............. 10
Automotive Air Conditioner (Optional) ............. 10
INTERIOR AND FURNiSHINGS .................... 11
Swing-Down Dinette Table ....................... 11
Pedestal Dinette Tables .......................... 11
Pull-Out (Lounge) Beds .......................... 11
Storage ...................................... 11
Controlling Moisture Condensation ................. 12
PLUMBING ............. " .................... , .14
Fresh Water ..... " ......... '" .......... '" ... 14
External Water Supply .............. " .......... 14
Filling Fresh Water Supply ....................... 14
Troubleshooting Water System .................... 15
Sanitizing Water Tank .............. '" .......... 15
Waste-Water System
............................ 16
Waste-Water Draining .................•......... 16
Do's and bon'ts -Waste Tanks .................... 17
Winterizing the Water System ..................... 17
Winter Storage Checklist
......................... 17
ELECTRICAL ..... " .... " .............•........ 19
115-Volt System Power Cord
..................... 19
12-Volt System ..........................•..... 19
115-Volt AC to 12-Volt DC Converter .............. 19
Fuses
........................................ 20
Auxiliary 12-Volt Battery ........................ 20
Auxiliary Generator Power Plant (Optional) .......... 20
LIQUEFIED PETROLEUM GAS SySTEM ............. 22
Using Your
LP Gas System at Low Temperatures ...... 22
Operation of LP Gas System ...................... 22
Filling the LP Gas Tanks .•....................... 23
LP Gas System Leak Checks ...................... 23
APPLIANCES ................................... 24
LP Gas Appliances .............................. 24
Roof Air Conditioner (Optional) ................... 25

MAINTENANCE ................................. 26
Interior Cleaning
............................... 26
Windows
..................................... 27
Locksets
and Latches ........................... 27
Plumbing
..................................... 28
Exterior Care
.................................. 28
Fire
Safety ................................... 29

FULL ONE-YEAR/15,OOO MILE
~--WARRANTY
FOR MOTOR HOMES MANUFACTURED BY SUBSIDIARIES OF flEETWOOD ENTERPRISES, INC.
SOLD IN THE UNITED STATES AND CANADA
COVERAGE PROVIDED
Your new motor home, including the structure, plumbing, heating (lnd electrical systems, and all appliances and equipment installed by
the manufacturer, is warranted under normal use to be free from manufacturing defects in material or workmanship.
The Vlfarfanty extends to the first retail purchaser end his transferee{s) and begins on the date of origln(ll retail delivery or the date the
motor home is first placed Into service as a rental, commercial or demonstrator unit {whichever occurs first!. The warranty extends for a
period of one
year from such date or until the unit has received 15,000 total miles of use as determined by the mileage shown on the
odometer (whichever occurs first!. Written notice of defects must be given to the selling dealer or the manufacturer not later than ten
(10) days after the expiration of the applicable warranty period.
OWNER'S OBLIGATIONS
The owner Is responsible for normal maintenance as described in the Owner's Manual; however, minor adjustments (such as adjustments
to the interior or exterior doors, LP regulator pressure, cabinet latches, TV antenna control, etc.) will be performed by the dealer during
the first
90 days of warranty coverage. Thereafter, such adjustments ere the responsibility of the owner as normal maintenance unless
required as a direct result
of repair or replacement of a defective part under this warranty.
If a problem occurs which the owner believes is covered by this warranty, the owner shall contact the SELLING DEALER, or other
authorized dealer, giving him sufficient information to resolve the matter. The owner shall deliver the motor home to the DEALER or
manufacturing plant location for warranty service.
DEALER'S OBLIGATIONS
By agreement with the manufacturer, the dealer Is obligated to maintain the motor home prior to retail sale, to perform a detailed pre·
delivery inspection and
to repair or replace any parts necessary to correct defects in material or workmanship.
WHEN THE DEALER DOES NOT RESOLVE THE PROBLEM
If
the dealer is unable or um-villing to resolve a problem which the O~\f!1er is convinced is covered by the warranty, he should contact the
MANUFACTURING PLANT at the address listed below and provide the manufacturer with a description in writing of the problem and
attempts made to resolve it.
MANUFACTURING PLANT OBLIGATIONS
Upon receipt of notice of a claim, where the dealer was unable or unwitting to resolve the problem, the manufacturing plant will repair
or replace any parts necessary to correct defects in material or workmanship, 0: will take other appropriate action as may be required.
WHEN THE MANUFACTURING PLANT DOES NOT RESOLVE THE PROBLEM
If
the representatives of the manufacturing plant are unable to resolve the problem and the owner is convinced that it is covered by the
warranty, the owner should call the toll-free number listed below to describa the problem and the attempts made to resolve it.
WHAT IS NOT COVERED BY THE EXPRESS WARRANTY
THIS WARRANTY DOES
NOT COVER:
1. THE AUTOMOTIVE SYSTEM (INCLUDING THE CHASSIS AND DRIVE TRAIN), TIRES AND BATTERIES, WHICH ARE
COVERED BY THE SEPARATE WARRANTIES OF THE RESPECTIVE MANUFACTURERS OF THESE COMPONENTS.
2. DEFECTS CAUSED BY OR RELATED TO:
A. ABUSE, MISUSE, NEGLIGENCE OR ACCIDENT;
B. FAILURE TO COMPLY WITH INSTRUCTIONS CONTAINED IN THE OWNER'S MANUAL;
C. ALTERATION OR MODIFICATION OF THE MOTOR HOME;
3. NORMAL DETERIORATION DUE TO WEAR OR EXPOSURE, SUCH AS FADING OF FABRICS OR DRAPES, CARPET
WEAR, ETC.
4. NORMAL MAINTENANCE AND SERVICE ITEMS,SUCH AS LIGHT BULBS, FUSES,WIPER BLADES, LUBRICANTS, ETC.
5, MOTOR HOMES ON WHICH THE ODOMETER READING HAS BEEN ALTERED.
6. TRANSPORTATION TO AND FROM DEALER OR MANUFACTURING PLANT LOCATION, LOSSOFTIME, INCONVEN-
IENCE, COMMERCIAL LOSS, LOSS OF USE, TOWING CHARGES, BUS
FARES, CAR RENTAL, INCIDENTAL CHARGES
SUCH AS TELEPHONE CALLS OR HOTEL BILLS, OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES.
SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM-
AGES,SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY UNDERTAKING, REPRESENTATION OR WARRANTY MADE BY ANY
DEALER OR OTHER PERSON BEYOND THOSE EXPRESSLY SET FORTH IN THIS WARRANTY.
Brand Name ____________________ Mode) _________ Serial No. ________ _
MANUFACTURING PLANT: CORPORATE HEADOUARTERS:
Consumer Affairs Department
Fleetwood Enterprises,
Jne.
P .0, Box 7300
Riverside, California 92523
From California: (SOO) 442-4804
From Outside of California: (800) 854·4755 printed
in USA

2
\~
1. Range hood vent 7. Luggage/generator compartment
2. Air conditioner 8. Refrigerator access
3.
Entry door holdback 9. Refrigerator vent
4.
Entry step 10. Plumbing vent
5. Lighted
entry assist handle 11. Furnace vents
6. Patio receptacle 12. City
water fill
12
11

1
1. Main battery
2. Engine oil dipstick
3. Brake cylinder reservoir
4. Auxiliary battery
•
Camping trips and recreational living can
save
more energy (and money) than you
think. Turn your home living systems
(heating, air conditioning, etc.)
to
minimum while you're gone. If you plan
an
extended trip, turn unneeded systems
completely off. An unoccupied house
doesn't need to consume as much energy
as an occupied
one. So remember to "turn
your house off".
WARNING
TURN OFF LP GAS MAIN VALVE IN
ORDER TO EXTINGUISH ALL PILOT
LIGHTS BEFORE FILLING GASOLINE
TANKS.
AFTER TANKS ARE FILLED,
AND AFTER TURNING MAIN VALVE
HT PI
3 4
PLANNING
AND
PREPARATION
Plan your trip and organize all preparations before you leave.
Proper preparation
is the key to getting the most enjoy-
ment from your motor home.
Plan
your route carefully. Consult maps and guidebooks.
Become aware beforehand
of road conditions, campsite
availability, or other circumstances.
BE SURE ALL EQUIPMENT IS SERVICED AND READY
FOR TRAVEL. Check the following items:
a. Check all fluids including:
Motor home engine crankcase oil
Transmission fluid
Power steering fluid
Radiator recovery system reservoir level
Master cylinder brake fluid
Electrolyte level of main and auxiliary batteries
Windshield washer reservoir level
b. Inspect wheel lugs for tightness. See Chassis
Operator's
Manual for torque specifications. Examine all tires for
road damage,
then inflate to the proper pressures as reo
commended in the Chassis Operator's Manual. Check
spare tire pressure.
In using your Chassis Operator's
1

2
Manual, note that tire pressures are given for cold tires
used under normal driving and load
conditions.
c. Check oil level in the generator power plant (if
installed). Refer
to instructions and maintenance manual
provided by
the generator manufacturer for other pre·
use service requirements applicable to this equipment.
Check that e~tra oil and other service supplies are pro·
vided for the generator power plant if the motor home
is to be used for extended periods.
d. Check that jack, jack handle, and lug wrench are pro·
perly stowed. NOTE: The chassis lug wrench may not
fit the spare tire bolts. Be sure you have the proper
size wrench to remove the spare tire.
e. Check that the 115·volt power cord is properly stowed
in its compartment. A power supply cord adapter will be
required in some camping areas. Be sure to use adapters
which provide
proper electrical ground.
f. Check that a serviceable fire extinguisher is secured in
the mounting bracket.
g. Verify that all items you plan to take are on board.
NOTE: Be sure the weight of passengers, equipment,
and supplies does
not cause your motor home
to exceed axle loads and overall veh icle loads
for which it was designed.
If in doubt, weigh
the vehicle at a public scale. See paragraph
on "WEIGHING".
h. Check that accessories, such as a sewer hose with the
necessary fittings and a water supply line (such as
garden·hose type approved for 125 psi) are on·board.
i. Fill fresh water tank, if required. (Refer to Plumbing
Section.)
j. Start refrigerator a day ahead of time. Refrigerator will
stay cold for several hours after being turned OFF
while traveling. Be sure to relight it when parked at
your campsite.
Check
to see that drain-line cap and holding-tank knife
valve(s) are closed and secured. Add a holding-tank chemical
to a few gallons of water in your body-waste holding tank.
(Referto Plumbing Section.)
Check
all headlights, stop lights, running lights, turn
signals and mirrors.
Put motor home contents in "travel condition".
a. Secure any loose objects which could shift while
traveling.
b. Secure refrigerator contents (place lids on all containers
holding liquids, for example) then secure locking latch
on refrigerator door.
c. Be sure all cabinets have the contents secured and the
doors latched.
d.
Be sure all exterior doors are closed and locked.
Adjust
the driver's seat to the most comfortable position,
then adjust
the side-view mirrors for maximum visibility.

12
1. Speedometer/Odometer
2. Turn signal Indicator
3. Vehicle Fuel Gauge
4.
Turn Signal Indicator
5. Oil Pressure Gauge
6. Engine Temperature Gauge
7. Vehicle
Battery Charge Indicator
8. Air Conditioner Temperature Control
9. Heater Controls
10. Air Conditioner Fan Speed Control
11. Radio/Tape Player
12. Ignition Switch
Fill the fuel tank. Your motor home is designed to use only
the fuel recommended in the Chassis Operator's Manual.
Fill the liquid petroleum gas (LPG) fuel tank(s) if required.
Check for spare fuses
of every size used in the vehicle. (See
Electrical System. &
Owner's Information Kit.)
Take the time before leaving to become familiar with the
instrument control panel and the operation of all items in
3
the driver compartment. Chevrolet instrument panel shown.
For
others, see Chassis Operator's Manual. Check all instrument
controls including wiper control, windshield washer, lighter,
emergency start (optional), heater/defroster blower control,
and the air conditioner blower/temperature controls (optional).
Also located on the dash is the optional sound system. The
cruise control (optional) is located on the turn indicator
handle. The emergency flasher control is located on the
right side of the steering column. Refer to the Chassis
Operator's Manual or individual instructions from equipment
manufacturers for operation of equipment, both standard
and optional.

4
Keep the Chassis Operator's Manual (provided in your
Owner's Information Kit) in the glove compartment. It
contains valuable reference information.

WARNING
EXCEEDING THE GAWR OR GVWR OF
YOUR MOTOR HOME CAN CAUSE UN·
DESIRABLE HANDLING CHARACTER·
ISTICS AND
MAY CREATE A SAFETY
HAZARD. MODIFICATION OF YOUR
VEHICLE
BY ADDITION OF RACKS NOT
SPECIFIED
BY THE MANUFACTURER TO
CARRY ADDITIONAL EQUIPMENT OR
VEHICLES
IS NOT RECOMMENDED, MAY
CREATE A SAFETY HAZARD AND MAY
VOID YOUR WARRANTY.
0
CJ
0 n
0
CJ
CJ
0
~
VEHICLE LOAD
WEIGHING CAPACITY
Your motor home is designed to carry the loads defined by
the Gross Axle Weight Rating (GAWR) and Gross Vehicle
Weight Rating (GVWR) shown
on the certification tag posted
on the driver's door jamb. These ratings are for a fully-
loaded vehicle including passengers
and normal belongings.
Periodically weigh the fully·loaded motor home at a public
scale. The following procedure is suggested, although
any method recommended by the scale operator which
correctly determines axle loads is acceptable. During
all measurements, it is important that the vehicle be
kept as level as possible.
1. Run
the front wheels onto the scale platform
and obtain a reading. (This first value is the front
axle Gross Axle Weight.)
2. Next, place
the entire vehicle (both axles) on the
scale and obtain a reading. (This second value is
Gross Vehicle Weight.)
3. Drive forward until only
the rear axle is on the
platform and obtain a reading. (This third reading
is rear axle Gross Axle Weight.)
4. Compare reading 2 with the GVWR of your vehicle.
If this reading exceeds the GVWR rating, it will be
necessary
to reduce total vehicle load.
5.
If reading 2 is less than the GVWR of your vehicle,
check readings 1 and 3 to verify that each is less
than the GAWR on the certification tag. If either
exceeds the GAWR for the axle, redistribute enough
equ
ipment from front to back or back to front to
ensure that loads on front and rear axles are within
the required limit.
Check vehicle weight periodically to obtain optimum mileage
from tires and improve handling. Tires should always be
inflated as recommenDed in the Chassis Manufacturer's
Instructions. See your Chassis Operator's Manual.
•
Every pound of extra weight means extra
gasoline consumption. Don't carry any
more than you need.
5

6
Avoid idling. When an engine idles it is
getting zero miles per gallon. If you must
stand for more than one minute, it's more
efficient
to turn the engine off and restart
it again.
WARNING
USE SEAT BELTS WHILE THE VEHICLE
IS IN MOTION. DO NOT OCCUPY SEATS
THAT ARE NOT EQUIPPED WITH BELTS.
READY TO LEAVE
BE SURE TO PLACE THE ENTRY STEP IN TRAVEL
POSITION.
STARTING AND WARMUP
Follow the recommendations in your Chassis Operator's
Manual when starting or operating your engine.
NOTE: Be sure transmission is in "P" park and parking brake
is engaged to keep the motor home from rolling. If the
parking brake needs adjustment, see the Chassis
Operator's Manual for adjustment instructions.
SAFETY BELTS
Seat belts are an
important safety feature of your vehicle.
Belts should be fastened while your motor home is in motion.
The driver's seat and all
other seats designed to carry passengers
while
under way have been equipped with lap belts.
All riders should be furnished with and use seat belts
while
the vehicle is in motion. Seats which are not
equipped with safety belts should hot be occupied
while vehicle is in motion and will be labeled: "THIS
SEAT NOT TO BE OCCUPIED WHILE VEHICLE IS
IN MOTION."
PASSENGERS SHOULD NOT
BE ALLOWED TO
RIDE
IN THE CAB·OVER BED AREA.
Safety belts are adjusted in the following manner: To lengthen
the belt, tip the buckle at right angles to the belt. Holding the
buckle in this position permits the belt to slide through. Pull on
the buckle until the desired length is obtained. To fasten the
belts, make sure the belts are not twisted, then push the tongue
end
of one belt into the buckle of the mating belt. Be sure it goes
in all the way and that it latches. Tighten by pulling the loose
end of the belt while holding the buckle. Adjust the belt
as low on the abdomen and as snug as comfort will allow for
greatest safety. Never use a belt for more than one person at
a time.
NOTE: If your belts have been equipped with retractors, be
sure belt
is pulled all the way out of retractor.
To release the belt, depress the button in the center of the buckle
and slide the tongue out of the buckle.

Always observe the speed limit.
Remember
that for every 10 miles over 50
miles per hour, you could be wasting
between 10% -15% more fuel.
Drive at an easy pace, avoiding jackrabbit
starts.
Try to pace your driving to avoid
red lights.
7
ON THE ROAD
DRIVING AND PARKING
Once you become accustomed to the feel of the controls and
the reference points from·the driver's seat, you will find driving
the motor home comparable to driving your family car. Become
familiar with the position of the motor home in traffic, and be
cautious when driving
to allow for the length and width
of the vehicle. Always allow extra room to corner, change
lanes and pass. Learn
to use the side mirrors to view the road behir
Check them
often as a reference to keep a good road/lane
position.
Drive with consideration on the highway, observing
all applicable
speed and safety regulations. The best cruising speed for
your
motor home will vary with road and weather conditions.
Gusting side-wind conditions may require a reduction in
speed. Remember that highter speeds may result in a sharp
increase
in fuel consumption.
Driving
on winding or mountain roads is not difficult if done
with reasonable care. Observe proper vehicle speeds when
ascending
or descending hills and always operate in the proper
transmission range. Downshift ascending on hills to avoid
overheating
or undue engine loads. Downshift when de-
scending grades. Engine braking power will help control
vehicle speed, and will help avoid overheating the brakes.
Allow for the extra height of your motor home and avoid
areas having low overhead clearance. Check for low-hanging
tree branches
or other obstructions whenever you drive or park.
Avoid low roofs when pulling
in for service. This may be
particularlv important if you drive with
the overhead vents
open
or if the motor home is equipped with a roof air
conditioner, a roof rack
or CB antenna.
When parking parallel, be sure to allow for poles or ob-
structions near the curb, as the front and rear portions of
the motor home swing wider than an automobile. When park-
ing on an incline, turn the front wheels into the curb in the
direction of the roll to aid the parking brake. Always shift
the transmission to PARK (P) when parking, and apply the
parking brake.
MISCELLANEOUS SAFETY TIPS
• When backing the motor home, have a person stand to
the rear on the driver's side, if possible, to gu ide you.
• Before departing on a trip, check your routes. Remember,
some tunnels prohibit motorhomes with LP gas systems.
• While traveling, make sure all occupants use their seatbelts.
• While traveling, make sure all doors are closed and that
cabinets, drawers, and loose objects are secure.
• Instruct your family on what to do in case of fire, and
hold fire drills periodically.
• Maintain proper charge in the fire extinguisher.
• Gas and smoke detectors are available from RV equipment
dealers, and may be considered as safety accessories.

8
WARNING
LOOSENING THE REAR
LUG BOLTS MAY
RELEASE BOTH OUTSIDE AND INSIDE
WHEELS. DO NOT ATTEPT TO REMOVE
LUGS WITHOUT HAVING A JACK
IN
•
Under-inflated tires can cause a 2% loss in
fuel for every pound of pressure under the
recommended pressure.
•
Misaligned wheels cause drag that robs fuel
economy. If you see uneven tire wear,
have front-end
al ignment checked.
• Keep a well stocked first aid kit handy.
• Keep a tool box handy.
• Check tires often while traveling. Inside rear duals should
receive special attention, as these tires may go flat and not
be noticed. Running a flat on an inside dual could lead to
a tire fire that would be extremely difficult to extinguish.
Make it a
habit to check tire pressures before each trip,
and when refueling give each tire a sharp rap
on the tread
surface with a piece of pipe or similar object. Properly
infalted tires produce a
"bung" sound when rapped. If the
tire is flat, the sound will be a dull "thud".
OVERHEATING
The engine and cooling system on your vehicle should be
operated and serviced as recommended in your Chassis
Operator's Manual.
WINDSHIELD DEFROST -COMFORT CONTROL
During winter months, it is important to keep the wind-
shield clear and keep the passenger compartment at
a comfortable temperature while on the road. This can be
done by use
of the proper combination of heater and
defroster controls.
12-VOLT FUSE REPLACEMENT
If part of your vehicle electrical system should fail while
on
the road, check the replacement circuit fuses located
in the automotive circuit. These are automotive-type fuses
available at most service stations. Refer to the ELECTR ICAL
section for information on living area 12-volt fuses.
TIRES
Your motor home is equipped with premium-grade truck
tires. Under normal circumstances and with proper mainten-
ance, you should receive thousands
of miles of trouble-
free service.
If you have a flat tire, see your Chassis Operator's Manual
for tire changing fnsturctions. Remember that your motor
home is extremely heavy. Each tire and wheel weighs
about 90 pounds and is difficult to handle. Whenever
possible, obtain road service. Attempt to change tires
yourself
under emergency conditions only.
EMERGENCY START SYSTEM (Optional)
An optional Emergency Start System may be installed in
your motor home. This permits using auxiliary battery power
to aid in starting the motor home engine if the vehicle battery
has discharged.
When this occurs (indicated by
one or more clicking sounds
when the key is turned to the START position), use the
Emergency Start System as follows:

9
NOTE: Shift the transmission to Park (P) and apply the parking
brake.
1. Press down and hold the Emergency Start switch.
2. Turn the key to start engine in normal manner.
Hold EME RGENCY START button down until
engine
is running and the ALTERNATOR indicator
on
the instrument panel shows that the engine is
charging the battery.
3. Release EMERGENCY
START button and operate
motor home in a normal manner.
When operating properly,
your vehicle alternator will be able
to handle normal vehicle driving requirements and also recharge
the battery (or batteries)
in a reasonable time when on the road.
•
A well·tuned engine can improve fuel
economy by up to 5% .
•
Replace engine air filter regularly.
Maintaining correct carburetor and
choke operation can increase
your
mileage 2% or more.

10
CAUTION
THE AUTOMOTIVE AIR CONDITIONER
PLACES AN ADDITIONAL LOAD ON
THE VEHICLE'S COOLING SYSTEM. IF
ENGINE RUNS ABNORMALLY HOT,
SHUT
OFF AIR CONDITIONER UNTIL
ENGINE COOLS DOWN.
SERVICING
MOTOR HOME CHASSIS OPERATOR'S MANUAL
Refer to your Chassis Operator's Manual for information on
chassis service recommendations.
Have the coolant, the battery electrolyte, and the engine
oil levels checked each
time when refueling.
NOTE: Proper engine servicing and record of servicing
may be mandatory
to ensure chassis warranty
protection. Follow the manufacturer's instructions
on periodic maintenance checks.
BATTERY SERVICE
Main Vehicle Battery
Your motor home has a 12-volt automotive battery located
under
the front hood. This battery provides power for all
vehicle requirements, including the radio and/or tape deck.
Have this battery serviced when fueling or servicing other
vehicle systems.
Auxiliary Battery
There is an auxiliary 12-volt battery
to provide living-area
power requi rements. Service this battery when fueling
or
servicing other vehicle systems.
When operating properly,
your vehicle alternator will be able
to handle normal vehicle driving requirements and also re-
charge the battery (or batteries) in a reasonable time when on
the road.
GENERATOR POWER PLANT SYSTEM SERVICE
Generator power plant service, recommended by the generator
manufacturer, should be performed
at an authorized service
center (listed
in the material provided in your Owner's
Information Kit). Routine or emergency service, such as adding
oil, changing filters
or replacing spark plugs, could be accomplish-
ed at auto service center, but must be done in accordance
with
the service instructions specified by the generator manu-
facturer.
AUTOMOTIVE AIR CONDITIONER (Optional)
For specific instructions, refer
to the information provided by
the air conditioner manuf(lcturer.

WARNING
OUTSIDE STORAGE COMPARTMENTS
ARE NOT SEALED, VENTED ENCLOSURES,
AND ARE ACCESSIBLE FROM INSIDE THE
MOTOR HOME. USE CARE WHEN STORING
FLAMMABLE, VOLATILE LIQUIDS,
HAZARDOUS CHEMICALS OR EQUIPMENT
IN THESE AREAS.
INTERIOR
AND
FURNISHINGS
11
SWING·DOWN DINETTE TABLE
To convert a swing-down dinette table into a bed, proceed as
follows:
1.
2.
3.
4.
5.
Unsnap cushions.
Reach
under table and fold leg back by releasing leg
latch.
Raise
front portion of table several inches tQ disengage
inserts from wall plates.
Lower
table top into position to complete base for bed.
Slide seat and back cushion into place over bed area.
PEDESTAL DINETTE TABLES
To convert a pedestal-style dinette table into a bed, proceed
as follows:
1. Unsnap cushions.
2. Remove
the top by lifting the table evenly, at the
same time giving a gentle twist or rocking motion to
loosen the top of the pedestals.
3. Remove pedestals from their socket with a lifting,
turning motion (rocking the metal gently if necessary).
4. Store pedestals
in any of the convenient compartments
or closets provided.
5. Place table top in position to complete base for bed.
6. Slide
seat and back cushion into place over bed area.
PULL-OUT (LOUNGE) BEDS
To convert a pull-out or Lounge seat into a bed, proceed as
follows:
1. Pull
out the support tray by grasping the trim below
the outside of the cushion and pulling it outward like
a drawer.
2. Unsnap
the cushion backs where they are attached
to the rear panel. The cushions may have hidden
fasteners which require a pull
of the tab to release.
3. Slide
the lower cushion out, lay the back cushion
flat
to complete the bed.
STORAGE
Storage facilities on
your motor home have been especially
designed to remain secure while the vehicle is in motion.
Exterior compartments have key-operated locks.
The
LP gas compartment i~ required by fire-prevention
regulations
to be unlocked at all times. Interior drawers rest
in small notches or detents when closed; to open, lift slightlY
to clear the detent, then pull open. For best results,
follow a few simple rules when stowing articles in
the motor
home.

12
1. AI ways keep tools and equipment stored in areas
where they
will not shift while traveling.
2. Wherever possible, place heavy articles in storage
compartments which are low and between
the axles
for better weight distribution.
3.
Use a "packing" technique of the articles in a com·
partment to prevent shifting. If necessary, secure
articles with straps
to prevent movement.
4.
Be sure that containers holding liquids are capped
and cannot tip or spill. When glass containers (or
dishes) are transported, secure them well
to protect
against accidental breakage.
5. Always lock latch on refrigerator
door
before getting under way.
6. Exterior storage compartments may
not be water·
tight in all climate conditions. Any articles which
could be damaged by water should be carried
inside
the motor home.
CONTROLLING rvlOISTURE CONDENSATION
Just as moisture collects on the outside of a glass of cold
water during humid weather, moisture can condense on
the inside surfaces of your recreationalvehicle during use
in cold weather when humidity of the interior air is high.
This condition
is much greater in a recreational vehicle
than
in most houses because the insulated walls of the
vehicle are much thinner than house walls, and the small
size and tight construction
of the vehicle allow a quick
buildup
of high moisture levels in the inside air.
The air inside a recreational vehicle can contain a sur·
prisingly large amount of water vapor. Estimates indicate
that a family of four can vaporize up to three gallons of
water daily through breathing, cooking, bathing, and
washing. Unless this water vapor
is carried outside by
ventilation,
or condensed by a dehumidifier, it will con-
dense on the inside of windows and walls.
You can reduce or eliminate interior moisture conden·
sation during cold weather by taking the following steps:
1. Ventilate with outside air.
Partially open one or more roof vents and one or
more windows to provide controlled circulation of
outside air into the interior. While this ventilation
will increase furnace heating load, it will greatly
reduce, or eliminate, water condensation.
Increase ventilation when larger numbers of people
are
in the vehicle.
NOTE: Even when it is raining or snowing, ventilation air
from outside will be far drier than interior air and
will effectively reduce condensation.
2. Install storm windows.
Install tight-fitting storm windows
to reduce or
eliminate condensation on window glass. The in-
terior surface of the window will be at least 20 degrees
warmer, greatly reducing moisture condensation.
3. Reduce moisture released inside
the vehicle.
Run
the range vent fan when cooking and the bath
vent fan (or open
the bath vent) when bathing to
carry water vapor out of the vehicle. Avoid making
steam from excessive boiling
or use of hot water.