Flexa Classic 1709111 User manual

Classicwhite highsleeper frame-190x90 cm
Dimensions
Length - 198cm
Depth - 98/148cm
Height - 179cm
Weight - 38kg
Issue 2 - 03/09/15
Important – Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
0045 7668 8055 or e-mail: order@flexa.dk
Assembly Instructions - Please keep for future reference 1709111

1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2, 3 and 4.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
IMPORTANT - READ CAREFULLY -RETAIN FOR FUTURE REFERENCE
ASSEMBLY:
Always follow the instruction. Current legislation requires that the high bed / bunk bed must be fitted with 4
safety-rails and a ladder or platform for the upper bunk. The high bed / bunk bed meets the European EN
747:2012 A1:2015 standards for security and durability.
MATTRESS:
This bed is designed to use a mattress size 190 cm long and 90 cm wide. The total thickness must not
exceed 16,1 cm. The mattress top must not pass the marking on the ladder / the post for the safety-rail.
WARNING:
High beds and the upper bed of bunk beds are not suitable for children under six years due to the risk of
injury from falls. Bunk beds and high beds can present a serious risk of injury from strangulation if not used
correctly. Never attach or hang items to any part of the bunk bed that are not designed to be used with the
bed, for example, but not limited to ropes, strings, cords, hooks, belts and bags. Children can be become
trapped between the bed and the wall, a roof pitch, the ceiling, adjoining pieces of furniture (e.g. cupboards)
and the like. To avoid risk of serious injury the distance between the top safety barrier and the adjoining
structure shall not exceed 75 mm or shall be more than 230 mm.
Do not use the high bed / bunk bed if any structural part is broken or missing.
MAINTENANCE INSTRUCTIONS:
Check regulary that all assembly fastenings are properly tightened. Ventilation of the room is necessary in
order to keep the humidity low and to prevent mould in and around the bed.

Components - Parts
Please check you have all the parts listed below
2
End panel x2 (86.5x27.6x0.8cm)
Tread x5 (31.8x6x2.6cm)
3
Bedside x2 (186.7x8.9x2.0cm)
8
Slat x15 (89.7x6.5x1.5cm)
1
Endrail x2 (86.5x8.9x2.0cm)
5Endrail x 2 (86.5x6.5x2.0cm)
4
7
List f.safety x2 (31.8x2.8x1.2cm)
2No. 12-01203181-20
If you have damaged or missing components,
call the Customer Helpline: 0045 7668 8055
No. 12-02603181-20
No. 12-01508971
No. 4301-0808651-20
No. 12-02008652-20
No. 12-02008651-20
No. 1305-18673-20
Endrail x 2 (86.5x8.9x2.0cm)
6No. 12-02008653-20

Components - Parts
Please check you have all the parts listed below
Leg highsleeper x4 (177.4x5.5x5.5cm)
9No. 12-05517741-20
3
Safety rail 3/4 x2 (150.9x6.5x2.0cm)
10 No. 12-02015092-20
Safety rail 1/1 x1 (186.7x8.9x2.0cm)
11 No. 12-02018672-20
Safety rail 1/1 x2 (186.7x6.5x2.0cm)
12 No. 12-02018673-20
Ladderside highsleeper x2 (182.9x8.9x2.0cm)
13 No. 12-02018291-20

Please check you have all the fittings listed below
M6x100mm Connecting bolt x6
Tools required
A
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
M6 Ø10x14mm Barrel nut x6
B
E
3,0x20mm Chipboard screw x2
C
10x50mm Dowel x18
D
Components - Fittings
Phillips
screwdriver
(medium)
Small
hammer
Ruler/tape
measure
4,0x30mm Chipboard screw x42
Allen key
4mm incl.
Flatblade
screwdriver
(medium)
4
6,3x60mm Assembly screw x 24
FNo. 3909-63060
ø8/M6x15mm Sleeve nut x1
GNo. 3923-06015
ø10mm Cover cap x12
HNo. 3938-00010-20
6,3x90mm Assembly screw x30
JNo. 3909-63090
ø7mm Cover cap x20
KNo. 3938-00007-20
Bracket f.SL ladder 16.5º x2
MNo. 4007-023
M6x70mm Connecting bolt x1
NNo. 3913-06070
ø8mm Cover cap x16
LNo. 3938-000081-20
ø10/ø6,3x15mm Spacer plastic x1
PNo. 3940-00015
No. 3901-30020
No. 3930-10050 No. 3901-40030
No. 3922-06014
No. 3913-06100
No. 4033-004

Assembly Instructions
Step 1
Step 2
Attach leg 9to endrails
5, 6and 7with 6
screws Jusing the Allen
Key.
Repeat same procedure
for both headboard and
footboard
During assembly
of headboard and
footboard, you must
decide if the grooves in
the MDF panels, should
face in or out of the bed
Slide the panel 4
between the end rail 5
and the end rail 7.
Attach the leg 9to the
endrails 5, 6and 7
with 6 screws Jusing
the Allen Key.
Repeat same procedure
for both headboard and
footboard
5
6
J
9
7
5
J
J
J
J
9
J
6
7
5
4

6
Assembly Instructions
Step 3
Insert dowels Dto the
bedsides 8– and to
all the safety rails 10 ,
11 and 12 . It may be
necessary to tap the
dowel in very gently with
a small hammer.
Attach the bedside 8
and the safety rails 12
and 11 to headboard
and footboard firstly by
placing the dowels in the
holes in headboard and
footboard.
The thin rail attached to
the bedside 8should
face inwards.
Push 4 Barrel Nuts B
into the small holes in
bedside 8, and safety
rail 11 .The groove on
barrel nuts Bshould be
horizontal.
Push connecting bolts A
through each leg 9to
meet barrel nuts Band
then fasten with the Allen
Key.
Push assembly screws
Jthrough the legs to
meet the safety rails 12 .
Step 4
10
8
D
D
D
11
12
x2
x2
x2
B
B
B
A
A
A
Jx2
J
8
12
11
x2
8

13
3
F
F
Assembly Instructions
Step 5
Attach the bedside 8
and both safety rails
10 to the bed firstly by
placing the dowels in the
holes in the leg.
Push 2 barrel nuts B
into the small holes
in bedside 8push
1 connecting bolt A
through each leg 9to
meet barrel nuts Band
then fasten with the Allen
Key.
Push 2 assembly screws
Jthrough the leg 9to
meet the safety rails 10
and then fasten with the
Allen Key.
Ladder can be
positioned
left or right !
Attach the treads 3to
the ladder sides 13 with
the screws F.
Attach the brackets Mto
the ladder sides 13 with
the screws E.
Step 6
7
10
10
A
J
M
3
F
E
M
E
13
3
F
M
E
3
3
x2
B
8
J
B
A
J
B
9
9
A
Front
16,5 mm

Assembly Instructions
Step 7
Attach the ladder to the
bed with 4 screws F
through the ladder side
13 into the safety rails
10 . Remember to attach
the spacer Pin hole no.
two from the top!
Attach the ladderside
13 to the leg 9with the
connecting bolt Nfrom
the outside the sleeve
nut Gfrom the indside.
Attach the brackets Mto
the bedside 8with the
chipboard screws C.
Place 1 slat 1(No.8)
in the bed, follow the
measurement.
Push the bedsides 8
together whilst attaching
the slat 1to the bed
with 2 screws E.
Step 8
8
F
13
9
N
13
P
C
G
N
P
G
10
C
C
F
10
!
PUSH
PUSH
8
1x2
No.8
918 mm
8
E

Assembly Instructions
Step 9
Position the remaining 14
slats 1in the bed with
a distance of 63,7 mm
between each.
Fasten each slat with 2 x
screws E
Attach the safety list 2
inside of the bed, on
the front safety rails 10
Should be in the center
of the front guards
between the slats.
Attach it 2to the safety
rails 10 and the bedside
8with chipboard
screws E, follow the
measurement.
Attach the safety list 2
outside of the bed, on the
back safety rails 12 .
Should be in the center
of the back guards.
Attach it 2to the safety
rails 12 and the bedside
8with chipboard
screws E, follow the
measurement.
Max. mattress height !
Assembly is complete.
Step 10
If you need help or have damaged or missing parts, call the Customer Helpline: 0045 7668 8055
E-mail: order@flexa.dk
Ref.no. 44-01116-20 B Stand: 030915 Page 10 (80-10503-20)
9
E
E
64 mm
E
E
11111 1 1111 1 1 1
E
E
E
E
2
2
71mm
71mm
71mm
71mm
8
8
12
10
12
10
12
10
12
10
8
8
2
2
1
!