FlexRadio FLEX-6400 User manual

3
4
2
Step 1- Remove cover screws on both
sides of the chassis (item 4).
There are 4 per side.
Step 2- Attach the handles (item 2)
to the chassis with the 4
supplied screws (item 3),
replacing the screws that
were removed in step 1.
Step 3- Repeat steps 2 and 3 for the
other handle.
For Handles Only
1
3
5
4
2
Step 1- Remove cover screws on both sides of the chassis (item 4). There are 4 per side.
Step 2- Attach rack mount ear (item 1 to chassis bracket (item 2) with the 4 supplied M2.5
screws (item 5).
Step 3- Attach chassis bracket (item 2) to the chassis with the 4 supplied screws (item 3),
replacing the screws that were removed in step 1.
Step 4- Repeat steps 2 and 3 for the
other bracket.
For Rack Mount Only
Referred to as (item 5), this screw attaches the
rack mount ear or handle to the rack mount.
M2.5 flat screw (1.5mm hex wrench *included)
Referred to as (item 3), this is a longer
replacement screw for fitting the rack mount ear
or handle to the chassis.
Philips Head Flat Screw (#1 Philips screwdriver)
FLEX-6400 & FLEX-6600
Rack Mount and Handle
Installation Guide

1
3
5
4
2
Step 1- Remove cover screws on both sides of the chassis (item 4). There are 4 per side.
Step 2- Attach rack mount ear (item 1) to chassis bracket handle (item 2) with the 4 supplied
M2.5 screws (item 5).
Step 3- Attach chassis bracket handle (item 2) to the chassis with the 4 supplied screws (item 3),
replacing the screws that were removed in step 1.
Step 4- Repeat steps 2 and 3 for the other bracket.
For Rack Mount With Handles
For any additional information on safety and operation please refer to the User Manual on the included CD
For technical support go to helpdesk.flexradio.com