FLI Charge FLIway 40 User manual

Now you can charge your electronic devices quickly
and conveniently using your FLI Charge charging pads,
smartphone cases and universal adaptors. All of the
products in the FLI Charge ecosystem have been designed
with ease of use in mind. FLI Charge transforms the way
you power your life – allowing you to keep all of your mobile
devices fully charged while reducing the hassle of power
cords and cables.
Please review the applicable operating instructions in
this manual prior to first use.
Congratulations on your
FLI Charge purchase!

FLI CHARGE PRODUCTS
FLIway 40

1. Set Up
2. Operation - Charging your FLI Charge-enabled devices:
The FLIway 40 charging pad can charge and power
multiple devices at the same time up to a total of 40
watts. Conveniently charge phones, tablets, smart
watches and other mobile devices regardless of their
orientation on the surface of the FLI Charge charging pad.
Place the FLIway 40 charging pad on a flat service
Plug the AC adaptor into a wall outlet
Insert the DC power plug firmly into pad connector
Once the FLIway 40 charging pad is plugged in, the indicator
light will turn on while the system status is checked. If the system
is functioning properly and there are no faults detected (i.e. keys,
liquid, metal objects or a finger on the surface of the FLIway 40
charging pad), the indicator light will turn o in 3-5 seconds.
You are now ready to charge your FLI Charge-enabled devices.
Once the FLIway 40 charging pad is plugged in, the indicator
light will turn on while the system status is checked. If the system
is functioning properly and there are no faults detected (i.e. keys,
liquid, metal objects or a finger on the surface of the FLIway 40
charging pad), the indicator light will turn o in 3-5 seconds.
You are now ready to charge your FLI Charge-enabled devices.
Simply place your FLIcase smartphone case, FLIcube module or
FLIcoin module anywhere on the FLIway 40 charging pad with
the constellation facing down. Please ensure that the FLIcase
•
•
•
•
•
1
FLIway 40

The FLIway 40 charging pad can charge several devices
(smartphones, tablets, smart watches, portable speakers, etc.) at the
same time including up to 8 smartphones. However, certain devices
or combination of devices may require more power than is available.
When this happens, the indicator light will blink red 3 times. Remove
the devices, one at a time, until the blinking stops.
If the indicator light blinks red 1 time, this means that a fault is detected.
Remove any foreign object or device to remedy the problem.
Please ensure that dirt or other contaminants are not on the FLIway
40 charging pad.
Charging will not occur if proper contact between the FLI Charge-
enabled device and the FLIway 40 charging pad is not made. 2
smartphone case, FLIcube module or FLIcoin module make
firm contact with and lay flat on the FLIway 40 charging pad.
Charging will not occur if proper contact is not made between
the constellation and the FLIway 40 charging pad.
The blue indicator light will light up to show you that your device
is receiving power. If a fault is detected, the FLIway 40 charging
pad will shut o and the indicator light will blink red and then
stop illuminating. Once the fault is removed, the FLIway 40
charging pad will turn back on.
When not in use, the FLIway 40 charging pad will be in Sleep
Mode. In this mode, the FLIway 40 charging pad and the
indicator light turn o.
You may simultaneously power and charge several FLI Charge-
enabled devices on the FLIway 40 charging pad.
Make sure to place only FLI Charge-enabled devices on the
FLIway 40 charging pad.
Devices that are not FLI Charge-enabled devices may not
receive power.
•
•
•
•
•
•
•
•
•
3. Maintenance and Usage

3

FLIcases
The FLIcase smartphone cases are designed to fit
various models of smartphones.
1. Installation
2. Operation
Separate the two pieces of the FLIcase smartphone case.
Carefully insert your smartphone into the FLIcase smartphone
case, making sure that the connector fits firmly into place.
Press firmly on each corner of the FLIcase to ensure proper fit.
The two pieces will lock together when properly installed.
Simply place your FLIcase smartphone case anywhere on the
surface of the FLIway 40 charging pad with the constellation
facing down. Please ensure that the FLIcase smartphone case
makes firm contact with and lays flat on the surface of the
FLIway 40 charging pad. Charging will not occur if proper
contact is not made between the constellation and the FLIway
40 charging pad.
To verify charging, the indicator light on the FLIway 40 charging
pad will turn on and the display on your smartphone will show
that the phone’s battery is charging.
In the event that you are without the FLIway 40 charging pad,
you can charge your smartphone via the microUSB connector on
the bottom of the FLIcase smartphone case.
•
•
•
•
•
•
4

5

FLIcube
The FLIcube module provides a convenient charging
option for your devices including smartphones, tablets,
smart watches, fitness trackers, gaming controllers,
portable speakers, and e-readers. The FLIcube module
is embedded with a constellation to send power to your
device via a USB power cord.
1. Installation
2. Operation
Plug a USB power cord into the USB port on the side of the
FLIcube module.
Simply place your FLIcube module anywhere on the surface of
the FLIway 40 charging pad with the constellation facing down.
Please ensure that the FLIcube module makes firm contact with
and lays flat on the surface of the FLIway 40 charging pad.
Charging will not occur if proper contact is not made between
the constellation and the FLIway 40 charging pad.
To verify charging, the indicator light on the FLIway 40 charging
pad will turn on, and the display or battery indicator on your
mobile device will show that its battery is charging.
•
•
•
6

7

FLIcoin
The FLIcoin is a small, versatile universal adapter that
turns normal microUSB and Apple Lightning products
into hassle free, wireless mobile devices. Simply adhere
and connect the FLIcoin to a mobile device and place
it on a FLIway 40 charging pad to begin powering the
device.
The FLIcoin is ideal for multiple mobile devices, including
smartphones, tablets, smart watches, fitness trackers,
ear-buds, headphones, portable speakers, mobile
cameras, portable backup batteries and many other
electronic devices.
1. Installation
2. Operation
Unwind the cord from the FLIcoin and insert into the microUSB or
Lightning connector port in your device.
Remove the adhesive strip from the metallic disc and place it firmly
on your device and place the FLIcoin on top of the metallic disc
where it will magnetically locate and stay in place.
Simply place your FLIcoin module anywhere on the surface of
the FLIway 40 charging pad with the constellation facing down.
Please ensure that the FLIcoin module makes firm contact with
and lays flat on the surface of the FLIway 40 charging pad.
Charging will not occur if proper contact is not made between
the constellation and the FLIway 40 charging pad.
To verify charging, the indicator light on the FLIway 40 charging
pad will turn on and the display or battery indicator on the
mobile device will show that its battery is charging.
•
•
•
•
8

PRODUCT CLEANING
TROUBLESHOOTING
Issue:
Causes & Solutions:
Disconnect power from the FLIway 40 charging pad.
Wipe surfaces with a clean damp cloth.
Remove any excess moisture with a clean dry cloth.
Reconnect power to the FLIway 40 charging pad.
Indicator light does not illuminate or blinks red and turns o
when a mobile device is placed on the FLIway 40 charging pad.
The mobile device is not FLI Charge-enabled. The FLIway 40 pad
will only power mobile devices that are FLI Charge-compatible.
Place only FLI Charge-enabled mobile devices on the charging pad.
The mobile device is not positioned properly on the FLIway 40
charging pad surface. Ensure that the mobile device is resting flatly
on and is making good contact with the FLIway 40 charging pad
surface. Also, clean the FLIway 40 charging pad surface if needed.
The DC power plug is not firmly plugged into charging pad, or the
AC adapter is not plugged into wall socket. Ensure that the AC
adapter is plugged into a working outlet and that the DC power
plug is firmly inserted into the FLIway 40 charging pad.
•
•
•
•
•
•
•
•
9
Potential issues and suggested solutions:

Issue:
Issue:
Causes & Solutions:
Causes & Solutions:
The mobile device does not indicate (via the smartphone display
or mobile device battery indicator) that the mobile device is
charging when the mobile device is placed on the FLIway 40
charging pad.
The indicator light on the FLIway 40 charging pad continuously
blinks on and o (mobile devices do not charge).
The mobile device is not resting properly on the FLI Charge 40
charging pad surface. Ensure that the mobile device is resting
flatly on (constellation down), and is making good contact with the
surface of the FLIway 40 charging pad. Also, clean the FLIway 40
charging pad surface if needed.
Overload condition; too many devices are resting on the FLIway 40
charging pad at one time. Remove mobile devices, one at a time,
until the blinking stops.
Metallic objects may be on the FLIway 40 charging pad. Remove
metal objects from the FLIway 40 charging pad and charging will
resume normally
•
•
•
•
•
10

11
Output
Voltage
(Volts)
FLIway 40
Apple iPhone 6/6s
Apple iPhone 6 Plus / 6s Plus
Samsung Galaxy S6
Samsung Galaxy S6 Edge
Samsung Galaxy S7
Samsung Galaxy S7 Edge
FLIcube
Apple Lightning
microUSB
20V
5V
5V
5V
5V
5V/9V
5V/9V
5.2V
5V
5V
2A
1A
1A
1A
1A
2A / 1.67A
2A /1 .67A
40W
5W
5W
5W
5W
10W /1 5W
10W / 15W
2.4A
1A
1A
12W
5W
5W
Output
Current
(Ampls)
Power
Consumption
(Watts)
FLI CHARGE PRODUCT
TECHNICAL SPECIFICATIONS
FLIcoin FLIcase

12
FLI CHARGE
LIMITED WARRANTY
What the Warranty covers
Pursuant to this limited warranty (the “Warranty”), fliCharge
International Ltd. (“FLI Charge”) warrants to the original purchaser
of a FLI Charge product that such product shall be free of defects in
design, assembly, material, or workmanship.
What the period of coverage is
FLI Charge warrants each of its products for one (1) year from the
original date of purchase.
What the Warranty does not cover
This Warranty does not cover damage caused by misuse or abuse,
accident, the attachment of any unauthorized accessory, alteration
to the product, improper installation, unauthorized repairs or
modifications, improper use of electrical/power supply, loss of power,
dropped product, malfunction or damage of an operating part
from failure to provide manufacturer’s recommended maintenance,
transportation damage, theft, neglect, vandalism, environmental
condition, loss of use during the period that the product is at a repair
facility or otherwise awaiting parts or repair, or any other conditions
whatsoever that are beyond the control of FLI Charge.
This Warranty is eective only if the product is purchased and
operated in the country in which the product is purchased. A
product that requires modifications or adoption to enable it to
operate in any other country than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications is not covered under this
Warranty.

FLI Charge reserves the right to discontinue any of its products
without notice, and disclaims any limited warranty to repair or
replace any such discontinued products. In the event that FLI Charge
is unable to replace the product (for example, because such product
has been discontinued), FLI Charge will oer a similar replacement
product if possible.
This Warranty does not apply to products purchased from a source
other than FLI Charge or a FLI Charge Authorized Reseller.
How to Replace Defective Products
If found to be defective, in FLI Charge’s sole discretion, FLI Charge
devices will be replaced without charge when returned to FLI
Charge. Please send FLI Charge devices to: FLI Charge: 5590
W Chandler Blvd #3, Chandler, AZ 85226, United States. You can
contact customer support by calling 212-309-7549 or e-mailing
support@flicharge.com.
FLI Charge reserves the right to review the damaged FLI Charge
product. All costs of shipping the FLI Charge product to FLI Charge
for inspection shall be borne solely by the purchaser. If FLI Charge
determines, in its sole discretion, that it is impractical to ship the
damaged equipment to FLI Charge, FLI Charge may designate, in its
sole discretion, an equipment repair facility to inspect and estimate
the cost to repair such equipment. The cost, if any, of shipping the
equipment to and from such repair facility and of such estimate shall
be borne solely by the purchaser. Damaged products must remain
available for inspection until the claim is finalized. Whenever claims
are settled, FLI Charge reserves the right to be subrogated under
vany insurance policies the purchaser may have.
Disclaimer
IN THOSE JURISDICTIONS WHERE IT CAN LAWFULLY DO SO, AND
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE
WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE
WARRANTY. FLI CHARGE HEREBY DISCLAIMS AND EXCLUDES ALL
OTHER WARRANTIES, EXPRESS, STATUTORY, OR IMPLIED, INCLUDING
13

BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY,
ACCEPTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT, TITLE,
FITNESS FOR A PARTICULAR PURPOSE, LOSS OF OR DAMAGE TO
DATA, LACK OF VIRUSES OR FREE FROM VIRUS OR MALWARE ATTACK,
SECURITY, PERFORMANCE, LACK OF NEGLIGENCE, WORKMANLIKE
EFFORT, QUIET ENJOYMENT, THAT THE FUNCTIONS CONTAINED IN THE
PRODUCT WILL MEET YOUR REQUIREMENTS, OR THAT DEFECTS IN THE
PRODUCT WILL BE CORRECTED, OR THAT YOUR USE OF THE PRODUCT
WILL GENERATE ACCURATE, RELIABLE, TIMELY RESULTS , INFORMATION,
OR DATA. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN
BY FLI CHARGE, A DEALER, AGENT, OR AFFILIATE SHALL CREATE A
WARRANTY. TO THE EXTENT WARRANTIES CANNOT BE DISCLAIMED OR
EXCLUDED, THEY ARE LIMITED TO THE DURATION OF THE RELEVANT
EXPRESS WARRANTY PERIOD.
IN NO EVENT SHALL THIS WARRANTY REQUIRE MORE THAN THE
REPLACEMENT OF ANY PRODUCT WHICH IS FOUND TO BE DEFECTIVE
WITHIN THE EFFECTIVE PERIOD OF THE WARRANTY. NO REFUNDS
WILL BE GIVEN. FLI CHARGE RESERVES THE RIGHT TO MAKE PRODUCT
SUBSTITUTIONS IN LIEU OF REPLACEMENT.
EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL FLI
CHARGE, ITS AFFILIATES, DEALERS, AGENTS OR SUPPLIERS OR THEIR
RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, LICENSORS AND
ASSIGNS BE LIABLE FOR ANY DIRECT, INDIRECT, EXEMPLARY, PUNITIVE,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER
(INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS OR
REVENUE, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR
LOSS OF PRIVACY, FOR LOSS OF ABILITY TO USE ANY THIRD PARTY
PRODUCTS OR SERVICES, FOR FAILURE TO MEET ANY DUTY INCLUDING
OF GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE,
AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER),
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT OR
OTHERWISE) ARISING OUT OF OR IN ANY WAY RELATED TO THE USE
OF OR INABILITY TO USE THE PRODUCT, EVEN IF FLI CHARGE OR SUCH
OTHER ENTITIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN NO EVENT SHALL THE TOTAL AGGREGATE LIABILITY 14

OF FLI CHARGE, ITS AFFILIATES, ASSOCIATES, DEALERS, AGENTS OR
SUPPLIERS TO YOU FOR ALL DAMAGES EXCEED THE PRICE YOU PAID
FOR THE PRODUCT. THIS LIMITATION IS CUMULATIVE AND WILL NOT
BE INCREASED BY THE EXISTENCE OF MORE THAN ONE INCIDENT
OR CLAIM. THE FOREGOING LIMITATIONS WILL APPLY EVEN IF ANY
WARRANTY OR REMEDY PROVIDED FAILS OF ITS ESSENTIAL PURPOSE.
THE WARRANTIES AND REMEDIES SET OUT HEREIN ARE EXCLUSIVE,
AND, TO THE EXTENT PERMITTED BY LAW, IN LIEU OF ALL OTHERS
ORAL OR WRITTEN, EXPRESS OR IMPLIED. SOME JURISDICTIONS DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES
OR OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE FOREGOING LIMITATIONS MAY NOT APPLY TO YOU.
IF ANY TERM IS HELD TO BE ILLEGAL OR UNENFORCEABLE, THE
LEGALITY OR ENFORCEABILITY OF THE REMAINING TERMS SHALL NOT
BE AFFECTED OR IMPAIRED.
How state law relates to the Warranty
Some states do not allow limitations on how long an implied
warranty lasts, so the above limitations may not apply to you. This
warranty gives you specific legal rights, and you may also have other
rights, which may vary from state to state. Some states do not allow
the exclusion or limitation of incidental, consequential, or other
damages, so the above limitations may not apply to you.
WARNING & SAFETY INFORMATION
WARNING: Failure to follow these safety instructions could
result in fire, electric shock, or other injury or damage.
When using electrical devices certain precautions
should be followed, including:
15

Reduce the risk of electric shock:
To reduce the risk of burns, fire, electric shock or injury:
Unplug the device from the electrical outlet prior to cleaning.
Do not reach for an appliance that has fallen into water.
Unplug it immediately.
Do not place or store appliance where it can fall or be pulled into
water.
Do not place in or drop into water or other liquid.
Do not use with extension cord.
Close supervision is necessary when FLI Charge products are used
by or near children or disabled persons.
Use FLI Charge products only for their intended use as described
in this manual.
Do not use with accessories of devices not having the FLI Charge
logo.
Never operate FLI Charge products if they have damaged cords,
plugs, cables or housing.
If FLI Charge products are not working properly, have been
dropped or damaged, return it to FLI Charge for examination and
repair.
Keep FLI Charge product cords away from heated surfaces.
Do not operate FLI Charge products where aerosol (spray)
products are being used or where oxygen is being administered.
FLI Charge products are designed for indoor use only. Do not use
outdoors.
Only set on dry surfaces. Do not place on surface wet from water
or cleaning solvents.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
All servicing of this product must be performed by
only authorized FLI Charge Service Personnel. 16

FCC/INDUSTRY CANADA
COMPLIANCE STATEMENT
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
•
•
•
•
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules
and Industry Canada license-exempt RSS standard(s). These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
17