FLOWERMATE Cross User manual
Flowermate Cross Manual
The Flowermate CROSS is designed for all dabbers and herb lovers. Equipped with
2 separate chambers and mode settings, a beautiful finishing, a higher-standard
chip tech, along with the peculiar design for dual professional functions, this whole
package will bring you the beyond experience ever!
DUAL HEATING TECHNOLOGY
Meet the Flowermate Cross. The Cross is the successor to the versatile
Flowermate Hybrid X Vaporizer, the all-in-one solution for those who
are looking for ra unit that can handle herbs as well as concentrate.
Improvements for the cross include the special concentrate heating
chamber and haptic feedback.
What’s In The Box
1 x Flowermate Cross Dual-function Vaporizer
1 x Carry Pouch
1 x USB Charging Cable
1 x Band and Snap Dab Tools Card
1 x Glass Mouthpiece
1 x Cleaning Brush
1 x Warranty Card
1 x Quick Guide (users manual)
4 x Replacement Silicone O-rings
5 x Replacement Stainless Steel Screens
www.canatura.com/en
How To Use The Flowermate Cross
Your vaporizer will come charged in the box, however, it is best practice to put it on the charger before the first
use. You’ll find the USB port on the concentrate chamber end of the vape. Plug it in and let it charge fully.
Once your Cross is fully charged, it is time to load your chamber. You can vaporize dry herbs or concentrates.
To change between Celsius and Farenheight, simply press both, the + and – buttons at the same time for a
second or so.
I’ll go through both processes one by one. Let’s start with vaping dry herbs
Vaporizing Dry Herbs
First up, open the herb chamber and pack your dry ground herbs. The
herb chamber is marked with a cannabis leaf icon and has holes on the
bottom. Don’t pack the chamber too tight, make sure you allow for the
mouthpiece base on the top.
Once you packed your dry herbs, turn your vaporizer on by pressing the
power button 5 times in a row. You’ll hear a short 1-second vibration as
your vape turns on. The OLED display is on the herb chamber side. After
turning the vaporizer on, it will give you the option to choose which
chamber to heat up.
Toggle to the herb icon using the + and – buttons and press the
power button twice in a row. Finally set your desired temperature
and wait for about 30 seconds for the vaporizer to heat up.
You’ll see the battery level, temperature and a 5 minutes session timer on the digital display. After your 5
minutes session is up, the Cross will shut off automatically. You can simply press the button 5 times again and
start from the beginning.
www.canatura.com/en
Vaporizing Concentrates
Open the wax chamber and add about a rice grain size concentrate into your chamber.
Remember, your concentrate chamber has no holes on the bottom.
Once you are done adding your concentrate, press the
power button 5 times in a row to turn the device on.
The Cross will vibrate once powered up and offer you
to choose which chamber to heat. Navigate to the wax
icon using the + or – button and press the power
button twice in a row.
As soon as you’ve done that, you’ll see a red dot
flashing on the screen on the wax chamber side.
The red dot is indicating that the chamber is
heating up. It turns to green and the Cross vibrates
in a few seconds to let you know its ready to go.
Press the power button and inhale while you are
pressing it.
As opposed to vaping dry herbs, you have to press
the power button while you are vaping
concentrates. You have a 15 seconds window before
the heating element cuts off. You can simply press
and hold the button again to keep vaping.
www.canatura.com/en
SPECIFICATIONS
www.canatura.com/en
Canatura - Online store with the best
hemp products for your health
www.canatura.com/en
Copyright reserved
This manual suits for next models
1
Table of contents
