Flying Gadgets F-Series User manual

ITEM NO.F46/F646

1
Thank you for purchasing this Flying Gadgets product. Please read this
manual carefully before use and retain it for future reference.
Technical parameter of the helicopter
Introduction
With a single-rotor design and built-in gyro, this helicopter is incrdibly
flexible and strong.
The newly designed body makes assembly and maintainance easy.
Using 2.4G auto connection technology, many helicopters can be
used at the same time.
A fully charged battery gives approx 9 mins of flight time.
This helicopter comes with an LCD remote control.
An optional high-pixel camera can be used on this model
(purchased seperately).
Safety Guidelines
This product is not a toy and can not be used by children who are under
14 years old.
Please read this instruction manual carefully before playing and operate
this product according to the manual.
The user is in charge of operating the helicopter. The
manufacturer and dealers disclaim all responsibility for any damage
caused by misuse.
Keep smallparts away from children to avoid accident.
Keep batteries away from fire or high temperatures.
When flying the helicopter, keep it 1~2 meters away from you or others
to avoid injury due to collision.
Do not modify the product which may cause a malfunction
or accident.
Fly the helicopter within your vision at all times.
Adult supervision is necessary when being used by children.
Only batteries of the same or equivalent type as recommended are to be
used.
Insert batteries with the correct polarity.
Non rechargeable batteries are not to be charged; the transmitter needs
4XAA batteries (not supplied).
Do not mix old and new batteries.
Gross Weight: about 235g
Motor:N180
Tail Rotor Diameter: 123MM
Battery: Li-polymer 7.4V
Fuselage Length:510MM
Overall height: 145MM
Gear Ratio: 10:1
Charging Time: about 2 hours
Main Rotor Diameter: 315MM

2
The LCD Remote control
The 2.4Ghz, LCD remote control, allows many helicopters to be used at the same time.
Control function: upwards, downwards, forwards, backwards, left, right,
spinning left and spinning right, video and photography.
Controls can be switched between either mode 1 or 2.
1
2
Product/spare parts included in this packaging
Description
Left stick
Right stick
3Trimmer A
In stick Mod 2 and 4, this button is null.
In stick Mod 1and 3, it helps to tune the helicoper's
forward and backwards flight.
Helicopter 1
1
2
1
1
Remote control
Rotor blade
Manual
7.4V 700mAh li-polymer battery
Qty(pc) Description Qty(pc)
No. Function switch Function description
4
In stick Mod 3 and 4, it helps to tune the helicopter's
sidewards flight.
In stick Mod 1 and 2,it helps to tune the helicopter's
left and right direction spinning speed.
Trimmer B
Main features of the remote control
Function switches of the remote control
Tail Rotor 1
Charger 1
STICK MOD2:upward/downward,turn left/turn right;
STICK MOD4:upward/downward,left/right.
STICK MOD1:forward/backward,turn left/turn right;
STICK MOD3:forward/backward,left/right.
STICK MOD1: upward/downward,left/right;
STICK MOD3: upward/downward, turn left/turn right;
STICK MOD2: forward/backward,left/right;
STICK MOD4: forward/backward,turn left/turn right.
Remote Controller
(Transmitter)
1. Left stick
11. Throttle changing
button (Left)
11. Throttle changing
button (Right)
7. Power switch
8. Antenna
9. Power indicator
2. Right stick
3. Trimmer A
4. Trimmer B
5. Trimmer C
10.Throttle limit knob
12.flight mode
changing button
13.aileron/rudder
changing button
6. Trimmer D
POWER
14.Camera Switch

3
In stick Mod 3 and 4, it helps to tune the helicopter's
left and right direction spinning speed.
In stick Mod 1 and 2,it helps to tune the helicopter's
sidewards flight.
In stick Mod 1 and 3, this button is null.
In stick Mod 2 and 4, it helps to tune the helicoper's forward
and backwards flight.
It controls the power source of the transmitter.Slide
the power switch to the “ON” position, the transmitter
is powered on; slide the power switch to the “OFF”
position, the transmitter is powered off.
No. Function switch Function description
5 Trimmer C
6 Trimmer D
7
8
Power switch
Antenna
9Power
indicator
Transmits wireless signal.
The indicator light keeps blinking slowly: the transmitter
is not activated.
The indicator light keeps flashing rapidly: the transmitter
is sending out a connection signal to the helicopter.
The indicator light keeps on without blinking: the
transmitter is connected to the helicopter.
10 Throttle limit
knob
The throttle of the helicopter can be adjuted by this button,
the user can use this button to increase or decrease the
helicopter's upwards/downwards speed.
11
12
13
Throttle
changing button
Slide down or slide up the 2 buttons at the same time
to select the throttle mode
There are 3 flight modes of the helicopter: low speed, medium
speed and maximum speed.
aileron/rudder
changing button
Also named Stick Mode changing button.Press this button
to change the control stick mode.
14 Camera Switch Turn on/off the camera on the helicopter.
flight mode
changing button
EXIT/
LIGHT
MENU/
OK
键键
EXIT/
LIGHT
MENU/
OK
键键
Pic.1 Pic.2
Remote controller’s setting
Select the throttle control mode 1/2
There is 1 throttle button on either side of the remote controller.
Slide both of the 2 buttons to "R", the right stick is the throttle control stick.
Slide both of the 2 buttons to "L", the left stick is the throttle control stick.
Tip: both of the 2 buttons should be either on the position of "R" or "L",
otherwise, the remote control can not be activated.

4
STICK MOD:1 STICK MOD:2
PUSH
EXIT/
LIGHT
MENU/
OK
POWER
PUSH
EXIT/
LIGHT
MENU/
OK
POWER
键键
Pic.3 Pic.4
Forward /
Backwards
control
Forward/
Backwards
control
This is the low speed icon. This is the medium speed icon. This is the maximum speed icon .
Forward/
Backwards
control
Forward/
Backwards
control
Throttle
control
Throttle
control
Throttle
control
Throttle
control
Left/Right
spinning
control
Left/Right
spinning
control
Left/Right
spinning
control
Left/Right
spinning
control
Left/
Right
control
Left/
Right
control
Left/
Right
control
Left/
Right
control
STICK MOD:3 STICK MOD:4
PUSH
EXIT/
LIGHT
MENU/
OK
POWER
键键
PUSH
EXIT/
LIGHT
MENU/
OK
POWER
Pic.5 Pic.6
Pic.7 Pic.8 Pic.9
When the left stick controls the throttle, press the AILE/RUDD button to
select the Mode( Mode 4 or Mode 2).
There are 3 flight modes available: low speed, medium speed and maximum
speed. The user can select the flight speed by pressing the flight mode button.
When the right stick controls the throttle, press the AILE/RUDD button to
select the Mode( Mode 1 or Mode 3).
Stick Mode Selection
Flight mode selection
PUSH
EXIT/
LIGHT
MENU/
OK
键键
PUSH
EXIT/
LIGHT
MENU/
OK
键键
PUSH
EXIT/
LIGHT
MENU/
OK
键键
CH
STICK MOD
00
12 CH
STICK MOD
00
12 CH
STICK MOD
00
12
Activate the LCD remote control
Slide the power switch to the "ON" position after you have chosen your
throttle mode selection. To activate the remote control, slowly push up the
throttle stick to the top and then push it down to the bottom.
The remote control is activated once a beep sound is heard. The indicator
light will keep flashing whilst the remote control is sending out a connection
signal. It takes about 10 seconds to connect. After the helicopter and the
remote control are connected, the indicator light on the controller remains
"ON”. The user can turn either the left stick or the right stick to skip the
connection process and enter into the start-up interface directly.
There are 4 flight modes available for selection: Stick Mod 1 (Pic.3)
Stick Mod 2 (Pic.4) Stick Mod 3 (Pic.5) Stick Mod 4 (Pic.6)

5
The helicopter
split charging device
connector stabilizer bar
servo Tail motor
rotor blade
searchlight
power socket
battery connector
Charging plug
camera
Charging the helicopter
How to charge the helicopter using the balance charger:
�Turn off the helicopter; unplug the battery cable from the helicopter.
�Insert the plug of the battery cable into the port of the balance box (matching
the plug to the port)
�Insert the plug of the plug charger cable into the circular port of the balance box, then,
connect the plug of the charger to an AC power outlet to start charging the battery.
�Once it is charging, the red power light of the balance box will be on. When
charging is finished, both the red light and green light of the charge controller will be on.
Full charge takes about 2-3 hours.
This helicopter comes with a split balanced charging device (1 piece plug charger +1 piece
balance box charger).

6
Turn on the remote control. To activate the remote control,slowly push
up the throttle stick to the top and then push it down to the bottom. The
remote control is activated once you hear a beep.Then, the
indicator light will flash rapidly whilst the remote control is sending out
a connection signal.
Connect the battery plug to the helicopter battery cable,the indicator light
of the helicopter will flash slowly,set the helicopter down on a flat stable
platform. Once the helicoter receives the connection signal,the indicator
light on the helicopter will flash rapidly.
Preparation for flight
When the whole auto signal connection process is finished,both
indicator lights on the helicopter and transmitter will be steady “ON”,
then push up the throttle stick slowly and the helicopter will take off.
1.User may push either of the control sticks to skip the auto signal connection.
2.Follow the connection tips precisely.
3.Once the transmitter is turned off, the connection procedure must be repeated
to operate the helicopter.
4.Please pull out the battery plug from the helicopter battery socket when you
have finished flying the helicopter.
OPERATIONAL TIPS
Check and regulate the swashplate of the helicopter
The swashplate of the helicopter should be kept horizontal, otherwise, the helicopter will fly
forwards/backwards/left/right on its own without any control signal.
Therefore it is very important to check and confirm that the swashplate is horizontal before
flying the helicopter. There are two ways to make the swashplate horizontal.
This product comes with a battery, please pay attention to the following safety instructions:
Only use the charger provided to charge the battery.
When charging the battery: If the battery becomes too hot, then the battery is overcharged. If this is the case then stop charging
the battery. As over charging will damage the battery.
Always supervise the charging of the battery.
Do not take the battery apart.
After flying the model the battery will be hot.
Wait for about 30 minutes for the battery to cool
down before recharging.
If you are planning on leaving the model for sometime and not
using it. Then charge it for about 1 hour before storing it away.