Fontana Showers NOLA BRASS FS194N User manual

Plumbers Tape Tape Measure Adjustable Wrench
Screwdriver
Drill
Hex Wrench
Level
Pencil or MarkerThread Sealant
*not included
POSSIBLE TOOLS REQUIRED*
Before you begin, please read the installation instructions below. Observe
all local building and safety codes.
Unpack and inspect the items for any shipping damages. If you find
damages, do not install.
Please note all products must be installed by a professional and certified
plumber otherwise warranty might be voided.
BEFORE YOU BEGIN
Product code: FS194N
FontanaShowers©
FontanaShowers©
FontanaShowers
FontanaShowers Customer Service: 800-684-4489
fontanashowers.com
1
NOLA BRASS DECK MOUNTED WHITE SINGLE
HANDLE KITCHEN FAUCET INSTALLATION
INSTRUCTIONS

All dimensions and specifications are nominal and may vary. Use actual products for accuracy in critical situations.
Max counter top thickness without
deck plate:
1.38”/35mm
Pre-drilled hole size requirements:
Min: 1.26”/32mm - Max: 1.38”/35mm
Hole Size Chart
Washer
Rubber Washer
Nut and locking bolts
Threaded Tube
Faucet Body
O ring
Faucet Deck Mount Installation
Faucet Size (In inches)
Technical Information
FontanaShowers©
FontanaShowers©
FontanaShowers
FontanaShowers Customer Service: 800-684-4489
fontanashowers.com
2
Spray Type : Pull Out
Style : Single Holder Single Hole
Type : Ceramic Plate Spool
Valve Core Material : Ceramic
Number of Holes for Installation : Single
Hole
Feature : Thermostatic Faucets
Installation Type : Deck Mounted
Material : Brass
Rotatable : Yes
Surface Finishing : Painted
Style : Contemporary
Surface Finishing : Painted
Flow Rate: Maximum 1.8 GPM
Aerator Included: Minimum .5 GPM
Water Pressure: 0. 60. 05 MPa

Installation Instructions
FontanaShowers©
FontanaShowers©
FontanaShowers
FontanaShowers Customer Service: 800-684-4489
fontanashowers.com
3
Step 1: Step 2:
Step 3: Step 4:

Step 5: Step 6:
Step 7: Step 8:
FontanaShowers©
FontanaShowers©
FontanaShowers
FontanaShowers Customer Service: 800-684-4489
fontanashowers.com
4

Kink Curved
round Twists
Slight
bend Sweeping
bend
Step 9: Step 10:
Mount Faucet to Deck
Install gasket into the groove under the faucet base. Insert faucet tubes and shank through the mounting
hole in the sink; and, place faucet over the mounting hole.
Secure faucet to sink with washer and mounting nut. Tighten securely by hand. Using a screwdriver,
tighten locking screws.
Loop the supply lines, if possible, to avoid having to cut them. Finger tighten both hot & cold sides. Tighten
one additional turn with a wrench. Use a second wrench to ensure you do not over tighten the check
valves. Repeat for the other side.
Make sure water supplies are closed. Move handle to the full mix position. Place bucket under the faucet
outlet tube.
Slowly open both water supply stops to flush lines. This will prevent debris from being lodged in the hose
and sprayer.
Close water supplies and faucet valves.
Remove the bucket and dry tube with a soft cloth.
Connect the battery cable to the battery box. Install 4 “AA” batteries into the battery box.
Important: DO NOT install batteries before making all electrical connections.
Note: It is critical for the batteries to be installed in the correct direction in the battery box.
Place the battery pack in a convenient location close to the floor.
Place flat on the floor for best performance and at least 2" from cabinet walls and other objects.
Note: If the battery pack does not reach the floor, place on a non-metallic object at least 2" from cabinet
walls.
Turn on water supplies. Turn faucet valve on full and check connections are properly made.
Flexible Connecting Hose
Care must be taken when connecting the flexible connection hose from the power supply box to the spout
to ensure it does not bend sharply and kink or twist.
See above for recommended ways to fit the flexible connecting hose.
FontanaShowers
©
FontanaShowers©
FontanaShowers
FontanaShowers Customer Service: 800-684-4489
fontanashowers.com
5

Important: Failure to follow these guidelines may result in poor performance and damage to the flexible
connection hose.
Operations
1. The operation is simple! With the handle in the “on” position tap anywhere on the spout, base, or handle.
2. The faucet is able to tell the difference between a touch and a grab. So it won’t turn on and off when you
don’t want it to.
3. Use the handle to control temperature and volume for both manual and electronic operations.
4. Whether you grab the handle or taps it, water will flow. Once water is flowing, a tap will turn it off.
5. Auto Shut-off, the faucet will automatically shut off after running for 4 minutes.
6. Your new faucet will run for up to 2 years on 4 AA batteries.
FontanaShowers
©
FontanaShowers©
FontanaShowers
FontanaShowers Customer Service: 800-684-4489
fontanashowers.com
6
Care & Cleaning
1. The product can be cleaned with warm
water, a mild soap and a clean soft cloth.
2. Clean progressively and gently.
3. It is not required to use any abrasive
cleaning pads, wire wool or micro-fibre
cloths to clean the product.
4. Avoid a vigorous cleaning action, as this
could contribute to denaturing and dulling
the finish.
5. Abrasive or strong cleaning products
containing ammonia, bleaches, alcohol,
dyes, acids (hydrochloric, formic,
phosphorus, chlorine or acetic) will be
detrimental to the product finish.
6. If using a spray cleaner, apply the
cleaning agent onto a soft cloth, never
directly spray onto the product as the
cleaner may enter gaps and openings and
cause damage. Do not allow the cleaner to
remain on the product for a period of time.
After cleaning, rinse thoroughly with clean
water
2.
For more details, visit the product page:
3.
1.
2.