for Living N88-1520 User manual

3-Seat Cushioned
Swing
Product No. 088-1520-8
Model No. N88-1520
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
Toll-free: 1-877-483-6759
IMPORTANT: Please read and understand this manual before any assembly. Before
beginning assembly of product, make sure all parts are present. Compare parts
with packaging contents list. If any part is missing, or if you have any questions,
call our Toll-free number at 1-877-483-6759.
Assembly Instructions

Important Safety Instructions
2Product No. 088-1520-8 Model No. N88-1520
Table of Contents
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using the product.
Caution! Always keep children under close supervision while they are using or around this product.
Never leave children unattended.
Important Safety Instructions
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY
Table of Contents 2
Important Safety Instructions 2
Part List 3
Assembly 4-9
Cleaning and Maintenance 10
Technical Data 10
Warranty 10
• This product is intended for domestic outdoor use only.
• The product should be placed on at horizontal ground.
• Ensure enough clearance around the product. Before assembling the product, nd level ground
not less than 6’ (1.8 m) away from any structures or obstructions, such as fences, garages,
houses, overhanging branches, laundry lines, or electrical wires.
• Any assembly or maintenance of the product must be carried out by adults only.
• Arrange necessary manpower when assembling or moving the product.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• Keep children and pets away while setting up the product.
• Check all nuts and bolts periodically for tightness. When required, tighten them again.
• Reparing and replacing parts should be done by a qualied technician.
• This is not designed to withstand harsh weather, including high winds, rain and snow.
• If the product will not be used for a longer period (e.g. wintertime), it should be stored in a
clean, dry environment.
• Do not light any res on or near the product!
• Stay calm if re breaks out. Do not return to the product before reghters allow you to do so.
• Retain the original packaging to store the product.

Parts List
Top frame bar 1 - 1
Front leg 2 - 2
Rear leg 3 - 2
Support crossbar 4 - 2
Rear crossbar 5 - 1
1
2
3
4
5
Arm 6 - 2
Seat and back 7 - 1
Hanging bar 8 - 4
Canopy side bar 9 - 2
Canopy edge bar 10 - 2
6
7
8
9
10
Canopy 11 - 1
Cushion 12 - 1
11
12
Bolt M6 x 45L - 2
Bolt M6 x 50L - 4
A
B
Bolt M6 x 55L - 2
Bolt M6 x 75L - 2
Metal Washer M6 - 20
Metal Washer M8 - 12
Nut M6 - 10
C
D
G
H
I
Nut M8 - 6
Black knob - 2
"S" Hook - 2
J
K
L
Bolt M8 x 70L - 2
Bolt M8 x 95L - 4
E
F
3
Part List

4
Assembly
Caution!
•Do not place the product underneath electrical lines.
Keep children away during assembly. This product contains small
parts which can be swallowed by children.
Keep ngers away from the places where they can be pinched
or trapped.
Do not attempt to assemble the product if any parts are missing.
•
•
•
Let us help you!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!
1-877-483-6759
If you have questions regarding your product, require warranty assistance,
or have damaged or missing parts, please call our customer service toll-free helpline.
Contact us for assistance, we’re here to help.
Product No. 088-1520-8 Model No. N88-1520
IMPORTANT: Please read and understand this manual before any assembly. Before beginning assembly of
product, make sure all parts are present. Compare parts with packaging contents list. If any part is missing,
or if you haveany questions, contact the service center at 1-877-483-6759 (toll free).
Place all parts from the box in a cleared area and position them on the floor in front of
you. Remove all packing materials and place them back into the box. Do not dispose
of the packing materials until assembly is complete. Read each step carefully before
beginning any assembly and make sure you understand each step. If you are missing
a part, please call our toll-free number for assistance 1-877-483-6759.
Needed for assembly:
Allen Wrench Open Hex Wrench Hex Wrench 2 people

Model No. 088-1520-8
Step 1
Requires: 1, 2, 3, F, H, J
Attach the Top frame bar 1 to the Front leg 2 and Rear leg 3.
Do not tighten completely. Repeat procedure for the other side.
FH
J
Not shown at actual size
Step 2
Requires: 2, 3, 4, B, G, I
Attach the Support bar 4 to the leg 2 & 3. Do not tighten completely.
Repeat procedure for the other side.
BG
I
Not shown at actual size
5
3
4
3
5
A
D
D
F
B
4
G
I
2
3
2
2
3
4
4
G
x 4
x 4
x 8
x 4
x 4
x 8
5
Assembly
3
4
C
E
E
G
3
4
3
2
FH
J
1
3
2
2
3
H

8
D
5
6
3
3
7
7
G
I
8
G
(4a)
(4b)
8
8
6
6
6
7
E
H
H
J
G
G
IA
CGGI
5
3
TOP
8
Step 3
Requires: 3, 5, C, G, I
Attach the Rear crossbar 5 to the Rear leg 3.
Don’
for the other side.
CG
I
Not shown at actual size
Step 4
Requires: 6, 7, 8, A, D, G, I, E, H, J
(4b)
Attach the Seat and back 7 to
assembled Arms (6 & 8). Don’
completely. Repeat procedure
for the other side.
AD
G
Not shown at actual size
(4a)
First attach the Hanging bar 8 to Arms 6 and
Seat and back 7, then attach the Hanging bar
8 to Arm 6. Don’
procedure for the other side.
I
EH
J
Not shown at actual size
x 2
x 2
x 4
x 2
x 8
x 2
x 4
x 2
x 2
x 4
t tighten completely, repeat procedure
t tighten completely. Repeat
t tighten
6
Assembly
Product No. 088-1520-8 Model No. N88-1520

J
6
L
8
8
6
7
TOP
Assembly
Model No. 088-1520-8
Step 5
Requires:
L
Attach the hook L to Hanging bars 8 , hanging
the whole seat to short top frame.
Note the “TOP” label
L
Not shown at actual size
Step 6
Requires: 1, 7, 9, K
Attach the Canopy side bar 9 to the assembled top frame bar 1.
Don’
K
Not shown at actual size
1K
1
7
99
x 2
x 1
t assemble for the other side.
7
Assembly

10
11
11
10
10
10
9
9
9
10
Step 7
Requires: 9, 10
Insert the Canopy edge bar 10 to the Canopy side bar 9.
Don’
Step 8
Requires: 10, 11
Attach the Canopy 11 then insert the Canopy edge bar 10 to the Canopy 11.
t assemble for the other side.
8
Assembly
Product No. 088-1520-8 Model No. N88-1520

1
10
K
11
9
9
9
10
9
Step 9
Requires: 9, 10, 11, K
Repeat procedure for the steps 6 and 7.
Make sure all bolts and nuts are securely tightened.
K
Not shown at actual size
11
9
12
11
Step 10
Requires: 12
Pull down the Canopy and put the Cushion 12 on the Seat and back.
Your swing is now ready for use. Enjoy!
x 1
9
Assembly

Made in China
10
Cleaning and Maintenance
Caution!
•
Check all bolts periodically for tightness, fastening them again as required.
Disassemble the product in the reverse order of the assembly steps. Always
disassemble the product completely. A partially disassembled product is not stable
enough to resist wind and bad weather, and therefore can be damaged and/or cause
damage.
Clean the product with mild soap and water. Rinse thoroughly, and wait until the
product is dry before reassembling it.
•
•
Technical Data
Warranty
Product No. 088-1520-8 Model No. N88-1520
This For Living product carries a one (1) year warranty against defects in
workmanshipand materials. Trileaf Distribution agrees to replace the defective
product free of charge within the stated warranty period, when returned by the
original purchaser with proof of purchase. This product is not guaranteed against
wear or breakage due to misuse and/or abuse.
Dimensions (L x W x H) 120 x 184 x 160 cm
47 x 72.5 x 63"
Product weight 24 kg
52.8 lb
•For washing the fabric parts: - Spread the fabric and use a soft bristle brush to clean;
- Always use a natural soap, never detergent;
- Water should be cold to lukewarm, never more than 25 degrees;
- Air dry only, do not spin in washing machine nor hand squeeze.
•Do not use bleach, acid, or other abrasive cleaners on the canopies or frame parts.
•Steel components of garden accessories and furniture are treated with rust inhibiting
paint. However, due to the nature of steel, surface oxidation (rusting) will occur if this
protective coating is scratched. This is a natural process. To minimize this condition,
it is recommended that care be taken when assembling and handling the product, in
order to prevent the paint from being scratched.