FOREDOM Wax Carver User manual
FOREDOM®
Wax Carver
Kits:
K.WC-1 includes
3 tips
K.WC-3 includes
7 tips
Specic plug
adapters for use
in Europe, UK,
or Australia
For Your Own Safety Read This Owner’s Manual
Before Operating Your Foredom Tool
Limited Warranty
This unit has a one year warranty from the date of delivery, valid only
if the unit has not been misused or tampered with.
Blackstone Industries, LLC d/b/a The Foredom Electric Company
warrants, to the original purchaser only, that its products will be free
from defects in material or workmanship for the applicable period of
time indicated above following the purchase date.
During the warranty period, the defective product will be repaired or
replaced without charge or, at our sole option, the purchase price will
be refunded. This warranty does not cover damage caused in transit
or by accident, misuse or ordinary wear.
ALL IMPLIED WARRANTIES INCLUDING,WITHOUT LIMITATION,
IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE
AND MERCHANTABILITY, ARE LIMITED IN DURATION TO THE
APPLICABLE WARRANTY PERIOD. IN NO EVENT WILL WE BE LIABLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states
do not allow limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusion may not apply to you.
At our sole option, repair, replacement or refund will be made if the
product is returned postage prepaid to:
Foredom Electric Company
16 Stony Hill Rd., Bethel, CT 06801
All warranty repairs must be done at our factory at the above
address. We will not pay any shipping or transportation charges. This
warranty gives you specic legal rights, and you may also have other
rights which vary from state to state.
FOREDOM®
For More Information
on Foredom machines,
handpieces or accessories, contact:
Foredom Electric Co. Bethel, CT 06801
Tel: 203-792-8622 •Fax: 203-796-7861,
Email: [email protected].
Foredom Wax Carver Parts
Handpiece A-WT-82
Handpiece Cap with cork cover
A-WT-84
Handpiece Cord A-WT-86
On/Off and Temperature Control
A-WT-87
Transformer 115–220V A-WT-85
European Plug Adapter A-WT-EU
UK Plug Adapter A-WT-UK
Australian Plug Adapter A-WT-AU
K.WC-1 includes 3 tips
Straight Taper A-WT-2
Knife A-WT-3
Small Spoon A-WT-4
K.WC-3 includes all 7 Tips
Narrow Flat A-WT-1
Curved Taper A-WT-5
Wide Flat A-WT-6
Large Spoon A-WT-7
www.foredom.net
F-1263 3/23 Printed in U.S.A.
Important Safety Instructions
•Warning: Tip becomes hot
during operation.
•Always turn off the unit when it is not
in use.
•Never bend the handpiece cord sharply
behind connector.
•Use only the 6 Volt DC transformer
supplied with your Wax Carver.
•Keep out of reach of children.
Assembly and Operation
•Use either end of the handpiece cord
to connect the output receptacle and
back end of the handpiece. Connect
the transformer cord to the input
receptacle as shown at right.
•Plug the transformer into an
electrical outlet.
•Insert a tip. The brass tips can be
sharpened or reshaped with a le or
bent with pliers. Follow instructions
at right to remove or change a tip.
•Turn the Temperature Control Dial to
desired temperature.
•The blue LED light will ash constantly
when the unit is turned on and with
greater frequency as the
temperature increases.
Knife
A.WT-3
Small Spoon
A.WT-4
Straight Taper
A.WT-2
Curved Taper
A.WT-5
Narrow Flat
A.WT-1
Wide Flat
A.WT-6
Large Spoon
A.WT-7
All 7 Brass Tips shown at
left come in K.WC-3.
* 3 Tips included in K.WC-1.
Tips and Plug Adapters
may also be purchased
separately.
Transformer 6 Volt Input
Receptacle
Cap with
cork cover
On/Off and
Temperature
Control
Handpiece
Handpiece
Cord
Blue LED
Light
Output
Receptacle
Plug Adapters
Changing Tips
•Always change tips while power is on
and handpiece is hot. Use a leather
cloth, leather gloves, or pliers to
gently turn the tip to make sure it can
be loosened and safely removed.
•Never remove a tip from a handpiece
that is cold. Cooled and hardened wax
may act as an adhesive and damage
your handpiece as you try to remove
the tip.
•Each tip has a coil spring that helps it
grip the handpiece heating rod. For
a tighter grip, slide the coil toward
the handpiece. Approximate Tip Temperatures at Dial Settings
Low 2 3 4 5 Max.
95º 200º 340º 425º 525º 560º
35º 93º 171º 218º 274º 294º
ºF
ºC
A-WT-EU
European
Plug Adapter
Otion-22
A-WT-UK
United Kingdom
Plug Adapter
Option-21
A-WT-UK
Australian Plug
Adapter Option-26
*
*
*
