Forever Redwood OCTAGONAL PICNIC TABLE User manual

ASSEMBLY INSTRUCTIONS FOR THE
OCTAGONAL PICNIC TABLE
(UNATTACHED BENCHES)
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
Octagonal Picnic Table (Unattached Benches)
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
Drawing
Description
Tabletop
Legs
Qty.
1
4
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
Octagonal Picnic Table (Unattached Benches)
www.ForeverRedwood.com
CONTENT OF BOXES
No.
A
B
Drawing
Description
3/8´´ X 6 ½´´ Bolts
(To attach the legs to the tabletop).
3/8´´ Nuts
Note: Dimensions of your hardware will vary depending on size.

P| 3
Octagonal Picnic Table (Unattached Benches)
www.ForeverRedwood.com
No
1
2
DESCRIPTION
Tabletop
Legs
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.
2
2
2
2
1

P| 4
Octagonal Picnic Table (Unattached Benches)
www.ForeverRedwood.com
Step 1: Place the tabletop upside down. After that, attach the legs (2) to the tabletop (1)with 3/8´´ x 6 ½´´ bolts (A) and nuts.
Each part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 2: Finally, turn the table over its feet.
2
2
2
2
1
3/8´´ X 6 ½´´ Bolts

P| 5
Octagonal Picnic Table (Unattached Benches)
www.ForeverRedwood.com
This completes the Picnic Table assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question,
don't hesitate to call us (866 332 2403) or email us. We are here to support you.