Forever Redwood HERITAGE LARGE WOODEN PICNIC TABLE User manual

ASSEMBLY INSTRUCTIONS FOR THE
HERITAGE LARGE WOODEN PICNIC TABLE
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
HERITAGE LARGE WOODEN PICNIC TABLE
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
6
Drawing
Description
Tabletop
Legs
Short supports
Long supports
Knee Braces
Bench
Qty.
Will
Vary
HARDWARE LIST
No.
A.
B
Drawing
Description
5/16´´ X 3 ½” Bolts
(to attach the legs to the short leg supports
and to the long leg supports/to attach the
legs to the Tabletop).
5/16´´ X 4 ½” Bolts
(to attach the knee braces to the legs/to
attach the benches to the legs).
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.
Note: Dimensions of your hardware will vary depending on size.

P| 2
HERITAGE LARGE WOODEN PICNIC TABLE
www.ForeverRedwood.com
No
1
2
3
4
5
6
DESCRIPTION
Tabletop
Legs
Short supports
Long supports
Knee braces
Bench
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.
3
4
2
2
2
2
4
3
1
5
5
6
6

P| 3
HERITAGE LARGE WOODEN PICNIC TABLE
www.ForeverRedwood.com
Step 1: Attach the legs (2) to the short leg supports (3) and to the long leg supports (4) with 5/16´´ x 3 ½´´ bolts (A). Each part
has a series of numbers that indicate where to attach the part with the corresponding number.
Step 2: Place the Table upside down. After that, use 5/16´´ x 3 ½´´ bolts (A) to attach the legs (2) to the Tabletop (1). Each part
has a series of numbers that indicate where to attach the part with the corresponding number.
2
5/16´´ x 3 ½´´ bolts
2
4
3
5/16´´ x 3 ½´´ bolts
1
5/16´´ x 3 ½´´ bolts

P| 4
HERITAGE LARGE WOODEN PICNIC TABLE
www.ForeverRedwood.com
Step 3: Attach the knee braces (5) to the tabletop and to the legs with 5/16´´ x 3 ½´´ bolts (A) and 5/16´´ x 4 ½´´ bolts (B). Each
part has a series of numbers that indicate where to attach the part with the corresponding number.
Step 4: Finally, attach the benches (6) to the legs with 5/16´´ x 4 ½´´ bolts (B). Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
5/16´´ x 3 ½´´ bolts
5/16´´ x 4 ½´´ bolts
5/16´´ x 4 ½´´ bolts

P| 5
HERITAGE LARGE WOODEN PICNIC TABLE
www.ForeverRedwood.com
This completes the picnic table assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question,
don't hesitate to call us (866 332 2403) or email us. We are here to support you.