Forever Redwood RUTH REDWOOD DINING CHAIR User manual

ASSEMBLY INSTRUCTIONS FOR THE
RUTH REDWOOD DINING CHAIR
ARMLESS
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

Ruth Redwood Dining Chair –Armless
www.ForeverRedwood.com
1
NOTE: Assembly is best done by two people. To assemble your product, you need a Hammer, a Ratch or a wrench and if
required a Drill.
PROCESS TO INSTALL THE HARDWARE PROVIDED.
Required Tools (Are not included in your hardware packing).
To install the bolts.
Insert the carriage bolts into the holes and lightly tap with a hammer until the square neck fit in the wood piece and the bolt
head must flush with the wood piece. Finally, place the washer and the nut and carefully tighten it using a ratch with the
necessary socket or a wrench.

Ruth Redwood Dining Chair –Armless
www.ForeverRedwood.com
2
CONTENT OF BOXES
No.
1
2
3
4
5
Drawing
Description
Legs
Seat
Backrest
Front Support
Diagonal Supports
Qty.
2
1
1
1
2
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

Ruth Redwood Dining Chair –Armless
www.ForeverRedwood.com
3
HARDWARE PACKING
No.
a
b
c
d
Drawing
Description
5/16” x 3 ½” Bolts
(To attach the seat and the backrest
to the legs. / To attach the diagonal
supports to the seat).
5/16” x 4 ½”Bolts
(To attach the frontal support and
the diagonal supports to the legs).
Washers
Nuts
Qty.
10
4
14
14
Note: Dimensions of your hardware will vary depending on size.

Ruth Redwood Dining Chair –Armless
www.ForeverRedwood.com
4
No
1
2
3
4
5
DESCRIPTION
Legs
Seat
Backrest
Front Support
Diagonal Supports
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.
1
2
3
4
5
1
5

Ruth Redwood Dining Chair –Armless
www.ForeverRedwood.com
5
Step 1: Use 5/16’’ x 3 ½’’ bolts (a) with washers and nuts to attach the seat (2) to the legs (1). Each part has a series of numbers
that indicate where to attach the part with the corresponding number.
Step 2: Attach the backrest (3) to the legs with 5/16’’ x 3 ½’’ bolts (a), washers and nuts. Each part has a series of numbers that
indicate where to attach the part with the corresponding number.
5/16’’ x 3 ½’’ Bolts
1
2
1
5/16’’ x 3 ½’’ Bolts
3

Ruth Redwood Dining Chair –Armless
www.ForeverRedwood.com
6
Step 3: Attach the frontal support (4) to the legs with 5/16’’ x 4 ½’’ bolts (b), washers and nuts. Each part has a series of numbers
that indicate where to attach the part with the corresponding number.
Step 4: Finally, use 5/16’’ x 3 ½’’ bolts (a) with washers and nuts to attach the diagonal supports (5) to the seat. After that, use
5/16’’ x 4 ½’’ bolts (b) with washers and nuts to attach to the legs. Each part has a series of numbers that indicate where to attach
the part with the corresponding number.
4
5/16’’ x 4 ½’’ Bolts
5/16’’ x 3 ½’’ Bolts
5/16’’ x 4 ½’’ Bolts
5
5

Ruth Redwood Dining Chair –Armless
www.ForeverRedwood.com
7
This completes the Dining Chair Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a
question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.