Forging Mount HY4104 User manual

Instruction Manual
Table Top Swivel TV Stand
®
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? If you have any questions, please feel
free contact us.
Email：[email protected]
We’re ready to help!
HY4104

•Carefully open the carton, remove contents and layout on cardbard or other protective
surface to avoid damage.
•Check to assure that all components were received undamaged. Do not use damaged or
defective parts.lf you require replacement parts, contact customer service at
[email protected]
•Carefully read all instructions before attempting installation.
UNPACKING INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
•Install and operate this product with care. Please read this instruction before beginning the
installation, and carefully follow all instructions contained herein. Use proper tools during
installation.
•
If you do not understand the instructions or have any concerns or questions, please contact
customer service at
[email protected]
WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment!
over resulting in death or serious injury!
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from yong children
:
It is the installer’s responsibility to make sure the combined weight of HY4104 and the display
does not exceed 99 Lbs(45kg).Use with heavier televisions may result in instability causing tip
Supplied Parts List
Wire Clip
1
TV Plate
(x1)
1
Support Pillar Tempered Glass Monitor Bracket Plastic Socket
(x1)
2(x1) 3 4 (x2) (x1) 5
M8x35 Bolt M6x50 Bolt
(x3)
A(x4) B
M8X22X2
(x3)
C
M8X22X2
(x3)
D
Metal Pad
Safety Lock
Rubber Pad
(x2)
E
(x6)
F(x2) G(x1) H(x1) I(x2)
J
Allen Key（5mm) Allen Key(4mm)
Spacer 2.5mm Spacer 5mm Spacer 20mm Washer with 3 holes
Steel Washer
Plastic Washer

Plastic Socket
Tempered Glass
(Painting Side)
3
5
Rubber Pad
HAllen Key
F
Connecting the Support Pillar to Tempered Glass
Step 1
Connecting the TV Plate to Support Pillar
Step 2
Support Pillar
2
C
DA
1.1
TV Plate1
M6x50 Bolt
B
Metal PadE
IAllen Key
2
two choices for height
adjustment for the TV plate
3
FX6
1.2
CD
H
1
EI

3
Measure the distance between the holes located at the
back of your TV (these measures may form the shape of a
square, or a rectangle) and check that these taken
measures are within the VESA (*) range for this wall
mount. (*) VESA: International standard established by the
TV manufacturers used to determine if LCD/LED TVs are
compatible with wall mounts.
Measure VESA and Check TV screws
600mm
400mm
Mounting the TV Bracket to Your TV
Step 3
TV Bracket X2
(04)
2.5mm Spacer 20mm Spacer 5mm Spacer Washer with 3 holes
M4

4
Option A (For Flat Back TV)
Option C (For Round Back TV)
Option B
TV10
TV10
TV4/TV5/TV6
TV7/TV8/TV9
TV2(M6x16)
TV3(M6x35)
TV10
TV4/TV5/TV6
TV7/TV8/TV9
TV3(M6x35)
If the length of the screws is too long, the spacers
can be used in multi-layer. If the installation fails
after trying various methods, please contact customer
service at [email protected]

5
Spacers may be necessary for 2 holes ONLY.
Option D (For TV with A “Bump”)
TV10
Option E
Spacers maybe necessary when brackets
interfere with cables or USB.
TV2(M6x16)
TV4
TV10
TV5/TV6
TV7/TV8/TV9
TV3(M6x35)

Attaching TV to the TV Plate and Managing the Wires
Step 4
6
NOT INCLUDED
Insert the safety lock in the bottom of
the bracket and then tighten the screws.
“Be gentle”
Safety Lock
G
J
Wire clip
J

7
First choice Second choice Third choice
Height adjustable vertical bracket(4)
First choice
second choice
third choice
If you find your TV set is too close to the base, please take off the TV from the stand.
Then, change to the second choice or third choice to allow more space between TV and
the tempered glass base (3).
Adjusting the Height of the TV
Step 5
Swivel Adjustment