Formex LG12 User manual

39 3/4"
36 3/4"
36 3/4"
17"
36 3/4"
2) Adding an optional
2x4 that is cut to the
same 36-3/4" length will
add extra support and
will also allow you to
hang a feeder or waterer
underneath the coop.
3)Four legs can now
be added. Whether
you use 2x4's, 4x4's,
pressure treated, non-
pleasure treated, and
length of cut, is your
preference. We can
suggest that building a
stand with about 24"
of clearance
underneath the coop,
leaves room for your
hens to utilize the
space and also keeps
the coop at a good
ergonomic height for
cleaning and egg
collection.
1) Start by building a simple
frame from four standard
2x4's. (Note: Standard 2x4's
actually measure 1-1/2" x 3-
1/2".) Cut all four boards to
36-3/4" lengths and then
assemble them as shown
using either nails or screws.
PAGE 1 OF 2
BUILDING A WOOD STAND
FOR YOUR SNAP LOCK CHICKEN COOP

4) The base of the coop will fit over and cover the wood frame.
PAGE 2 OF 2
6) Adding a stand to your coop will require you to add a ramp also. Your
ramp should be about 12" wide and the length should be over twice the
height of your stand. It should also have 1/2" to 1" cleats every 4 to 6
inches and be well sanded in order to prevent splinters. Attach the top of
the ramp just below the door by nailing or screwing it directly to the base
and frame.
5) The base can now be secured
to the frame by driving screws or
nails through the sides of the base
and into the wood frame. There is
no need to predrill holes.