FORMUFIT External Adjustable Elbow Instruction sheet

External Adjustable Elbow
FORMUFIT External Adjustable Elbows connect two (2) segments of PVC Pipe and adjusts to
any angle between 90° and 270°. To connect this product to PVC pipe, follow the instructions
shown below.
Assembly
Securing
For permanent and strong connections, it is!recommended to use!PVC cement/solvent to
attach the PVC pipe and the adjustable elbow.
You can also temporarily connect fitting by driving a self-tapping screw where the pipe and
cap meet, or apply electrical tape over the end of the PVC pipe prior to insertion for a
temporary, yet strong connection.!
All rights reserved. TM, ® & Copyright © 2009-2018 FORMUFIT LC
https://formufit.com
PRODUCT INSTRUCTIONS
Line up and insert one end of a PVC
Pipe inside of one socket of the
adjustable elbow.
Push or tap into place until the pipe is
fully seated. Repeat for the next pipe
segment on the opposite side of the
fitting.
1
2

Usage and Adjustment
All rights reserved. TM, ® & Copyright © 2009-2018 FORMUFIT LC
https://formufit.com
To adjust the elbow, press the button on
the top of the adjustable fitting until it is
fully depressed.
With the button fully pressed, rotate
the arms of the elbow until they are in
the position desired, then release the
button to lock in place.
1
2