Fortinet FortiVoice Enterprise 3000E User manual

FortiVoice™ 3000E
QuickStart Guide

August 23, 2016
2nd Edition
Copyright© 2016 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare®
and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in
the U.S. and other jurisdictions, and other Fortinet names herein may also be registered
and/or common law trademarks of Fortinet. All other product or company names may
be trademarks of their respective owners. Performance and other metrics contained
herein were attained in internal lab tests under ideal conditions, and actual performance
and other results may vary. Network variables, different network environments and
other conditions may affect performance results. Nothing herein represents any binding
commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied,
except to the extent Fortinet enters a binding written contract, signed by Fortinet’s General
Counsel, with a purchaser that expressly warrants that the identified product will perform
according to certain expressly-identified performance metrics and, in such event, only the
specific performance metrics expressly identified in such binding written contract shall be
binding on Fortinet. For absolute clarity, any such warranty will be limited to performance
in the same ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet
make any commitment related to future deliverables, features or development, and
circumstances may change such that any forward-looking statements herein are not
accurate. Fortinet disclaims in full any covenants, representations, and guarantees
pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify,
transfer, or otherwise revise this publication without notice, and the most current version
of the publication shall be applicable.
Technical Documentation http://docs.fortinet.com
Knowledge Base http://kb.fortinet.com
Forums https://forum.fortinet.com
Customer Service & Support https://support.fortinet.com
Training Services http://training.fortinet.com
FortiGuard Threat Research and Response http://www.fortiguard.com
Document Feedback Email: [email protected]

Table of Contents
Package Contents 1
Connecting to FortiVoice 2
Registering Your Product 4
Technical Specifications 5
LED Specifications 6
Cautions and Warnings 7
License Agreement 14

Package Contents
FortiVoice™ 3000E
QuickStart Guide
2 Rack-Mount
Brackets
QuickStart
Guide
Power Cable Console Cable
4 Rubber Feet Bracket Screws
Ethernet Cable
FortiVoice Enterprise 3000E PBX appliance
QuickStart Guide
Power cable
Ethernet cable
Console cable
2 Rack-mount brackets
Bracket screws
4 Rubber feet
Page 1

Connecting to FortiVoice
You can configure your FortiVoice appliance using either its web pages (the web UI)
or the command line interface (CLI). After connecting, follow the setup instructions
in the FortiVoice Phone System Administration Guide.
To connect to the FortiVoice web UI
Browser requirements: Internet Explorer 7 or higher, Firefox 3.5 or higher, Safari 4
or higher, and Adobe Flash Player 9 or higher plug-in required to display statistics
charts.
1. Connect the FortiVoice appliance’s port1 to your computer using the provided
Ethernet cable.
2. On your computer, configure it to match the appliance’s default port1 subnet.
For example, on Windows 7, click the Start (Windows logo) menu to open it, then
click Control Panel. Click Networkand Sharing Center, Local Area Connection,
then the Properties button. Select Internet Protocol Version 4 (TCP/IPv4) then
click its Properties button. Select Use the following IP address, then change your
computer’s settings to:
• IP address: 192.168.1.2
• Subnet mask: 255.255.255.0
3. To access the FortiVoice web UI, start a browser and browse to
https://192.168.1.99/admin (remember to include the “s” in https:// and “/admin”
at the end of the URL).
4. Type admin in the Name field, leave the Password field blank, and click Login.
To connect to the FortiVoice CLI
1. Connect the FortiVoice console port to your computer using the console cable.
2. On the management computer, start a terminal emulation program (such as
PuTTY). Use these settings:
• Serial line: COM1
• Baud Rate: 9600
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow Control: None
3. Press Enter on your keyboard to connect to the CLI.
Page 2

4. Type admin in the Name field, leave the Password field blank, then press Enter.
To power off the appliance via the web UI
Always properly shut down the FortiVoice appliance’s operating system before
turning off the power switch or unplugging it. This causes it to finish writing any
buffered data, and to correctly spin down and park the hard disks.
Do not unplug or switch off the FortiVoice appliance without first halting
the operating system. Failure to do so could cause data loss and hardware
problems.
1. Connect to the web UI.
2. Go to System > Status.
3. In the System Command widget, click the Shut Down button.
You may be able to hear the appliance become more quiet when the appliance
halts its hardware and operating system, indicating that power can be safely
disconnected.
4. Disconnect the power cable from the power supply.
To power off the appliance via the CLI
1. Connect to the CLI.
2. Enter the following command:
execute shutdown
You may be able to hear the appliance become more quiet when the appliance
halts its hardware and operating system, indicating that power can be safely
disconnected.
3. Disconnect the power cable from the power supply.
Page 3

Registering Your Product
Register
Register your Fortinet product in order to receive:
• Technical Support • Software updates
Enregistrer
Vous devez enregistrer le produit pour recevoir:
• Support technique • Mises-à-jour
Registra
La reistrazione ti permette di usufruire di:
• Supporto Tecnico • Nuove funzionalita
Registrar
Debe registrar el producto para recibir:
• Apoyo técnico • Nuevas funcionalidades del producto
登録のお願い
本日、フォーティネット製品の登録をしてください。
登録すると次のメリットがあります。
• テクニカルサポート • 新機能の追加
请马上注册
您的飞塔产品
您在注册以后才能得到技术支持、新产品特点信息
Web: https://support.fortinet.com/
Toll free: 1 866 648 4638
Phone: [phone]
Fax: [phone]
Email: [email protected]
Page 4

Interface Type Protocol Description
Ethernet Ports
1 - 4
RJ-45
10/100/1000
Gigabit Ethernet Ethernet ports for connection to your
network and the Internet.
USB Ports
1-2
USB-A USB 2.0 Reserved for future use.
Console RJ-45 RS-232 serial Optional connection to the management
computer. Provides access to the CLI.
Power
Connection
100-240V AC, 50-60Hz, 5-3A
Technical Specifications
Page 5
Alarm, Hard Disk, and Power LEDs
Console Port Ethernet Ports 1 - 4
USB Ports
FortiVoice Enterprise 3000E front view
FortiVoice Enterprise 3000E back view
Power Ground

LED State Description
Hard Disk Drive
(Top LED)
Amber Activity on the hard disk drive.
Alarm
(Middle LED)
Off System is normal.
Red System failure.
Power
(Bottom LED)
Green The appliance is on.
Ethernet Ports
Activity (Left LED)
Amber Port is active.
Flashing Amber Port is transmitting and receiving data.
Off No cable is connected to the port.
Ethernet Port
Speed (Right LED)
Green Port is connected at 1Gbps.
Amber Port is connected at 100 Mbps.
Off Port is connected at 10 Mbps or not in use.
LED Specifications
Page 6

Cautions and Warnings
Page 7
Environmental specications
Rack Mount Instructions - The following or similar rack-mount instructions are
included with the installation instructions:
Instructions de montage en rack - Les instructions de montage en rack suivantes
ou similaires sont incluses avec les instructions d’installation:
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack environment may be greater than room
ambient. Therefore, consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature (Tma) specified by
the manufacturer.
Température ambiante élevée – S’il est installé dans un rack fermé ou à unités
multiples, la température ambiante de fonctionnement de l’environnement du rack
peut être supérieure à la température ambiante de la pièce. Par conséquent, il est
important d’installer le matériel dans un environnement respectant la température
ambiante maximale (Tma) stipulée par le fabricant.
Reduced Air Flow - Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not compromised.
Ventilation réduite – Installation de l’équipement dans un rack doit être telle que la
quantité de flux d’air nécessaire au bon fonctionnement de l’équipement n’est pas
compromise.
Mechanical Loading - Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading.
Chargement Mécanique – Montage de l’équipement dans le rack doit être telle
qu’une situation dangereuse n’est pas lié à un chargement mécanique inégal.
Circuit Overloading - Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits might
have on overcurrent protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing this concern.

Surtension – Il convient de prendre l’ensemble des précautions nécessaires lors
du branchement de l’équipement au circuit d’alimentation et être particulièrement
attentif aux effets de la suralimentation sur le dispositif assurant une protection
contre les courts-circuits et le câblage. Ainsi, il est recommandé de tenir compte
du numéro d’identification de l’équipement.
Reliable Earthing - Reliable earthing of rack-mounted equipment should be
maintained. Particular attention should be given to supply connections other than
direct connections to the branch circuit (e.g. use of power strips).
Fiabilité de la mise à la terre– Fiabilité de la mise à la terre de l’équipement monté
en rack doit être maintenue. Une attention particulière devrait être accordée
aux connexions d’alimentation autres que les connexions directes au circuit de
dérivation (par exemple de l’utilisation de bandes de puissance).
Refer to specific Product Model Data Sheet for Environmental Specifications
(Operating Temperature, Storage Temperature, Humidity, and Altitude)
Référez à la Fiche Technique de ce produit pour les caractéristiques
environnementales (Température de fonctionnement, température de stockage,
humidité et l’altitude).
Safety
Warning: Equipment intended for installation in Restricted Access Location.
Avertissement: Le matériel est conçu pour être installé dans un endroit où l’accès
est restreint.
Battery – Risk of explosion if the battery is replaced by an incorrect type. Do
not dispose of batteries in a fire. They may explode. Dispose of used batteries
according to your local regulations. IMPORTANT: Switzerland: Annex 4.10 of
SR814.013 applies to batteries.
Batterie – Risque d’explosion si la batterie est remplacée par un type incorrect.
Ne jetez pas les batteries au feu. Ils peuvent exploser. Jetez les piles usagées
conformément aux réglementations locales. IMPORTANT: Suisse: l’annexe 4.10 de
SR814.013 s’appliquent aux batteries.
警告
本電池如果更換不正確會有爆炸的危險
請依製造商說明書處理用過之電池
Page 8

Page 9
Grounding — To prevent damage to your equipment, connections that enter from
outside the building should pass through a lightning / surge protector, and be
properly grounded. Use an electrostatic discharge workstation (ESD) and/or wear
an anti-static wrist strap while you work. In addition to the grounding terminal of the
plug, on the back panel, there is another, separate terminal for earthing.
Mise à la terre — Pour éviter d’endommager votre matériel, assurez-vous que
les branchements qui entrent à partir de l’extérieur du bâtiment passent par un
parafoudre / parasurtenseur et sont correctement mis à la terre. Utilisez un poste
de travail de décharge électrostatique (ESD) et / ou portez un bracelet anti-statique
lorsque vous travaillez. Ce produit possède une borne de mise à la terre qui est
prévu à l’arrière du produit, à ceci s’ajoute la mise à la terre de la prise.
This product has a separate protective earthing terminal provided on the back
of the product in addition to the grounding terminal of the attachment plug. This
separate protective earthing terminal must be permanently connected to earth with
a green with yellow stripe conductor minimum size # 14 AWG and the connection is
to be installed by a qualified service personnel.
Ce produit a une borne de mise à la terre séparé sur le dos de l’appareil, en plus de
la borne de mise à la terre de la fiche de raccordement. Cette borne de mise à la
terre séparée doit être connecté en permanence à la terre avec un conducteur vert
avec la taille bande jaune de minimum # 14 AWG et la connexion doit être installé
par un personnel qualifié.
Disconnect TNV circuit connector before removing cover.
Débranchez le câble du circuit TRT avant d’enlever le couvercle.
IMPORTANT SAFETY INSTRUCTIONS - When using your telephone equipment,
basic safety precautions should always be followed to reduce the risk of fire, electric
shock and injury to persons, including the following:
CONSIGNES DE SÉCURITÉ IMPORTANTES - Lorsque vous utilisez votre
équipement téléphonique, des précautions de sécurité de base doivent toujours
être suivies pour réduire le risque d’incendie, de choc électrique et de blessures
corporelles, y compris ce qui suit:
-Do not use this product near water for example, near a bathtub, washbowl,
kitchen sink or laundry tub, in a wet basement or near a swimming pool.
-Ne pas utiliser ce produit près de l’eau, par exemple, près d’une baignoire, d’un
lavabo, d’un évier de cuisine ou cuve à lessive, dans un sous-sol humide ou près
d’une piscine.

-Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
-Évitez d’utiliser un téléphone (autre qu’un téléphone sans fil) pendant un orage. Il
peut y avoir un risque de choc électrique par la foudre.
-Do not use the telephone to report a gas leak in the vicinity of the leak.
-Ne pas utiliser le téléphone pour rapporter une fuite de gaz à proximité de la fuite.
-Use only the power cord and batteries indicated in this manual. Do not dispose of
batteries in a fire. They may explode. Check with local codes for possible special
disposal instructions.
-Utilisez uniquement le cordon d’alimentation et les piles indiquées dans ce manuel.
Ne jetez pas les batteries au feu. Ils peuvent exploser. Vérifiez les codes locaux pour
connaître les instructions spéciales d’élimination.
SAVE THESE INSTRUCTIONS
CONSERVER CES INSTRUCTIONS
CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger (e.g., 24 AWG)
UL Listed or CSA Certified Telecommunication Line Cord
ATTENTION: Pour réduire le risque d’incendie, utilisez uniquement 26 AWG ou
supérieur (par exemple, 24 AWG) lister UL ou cordon certifié CSA
CAUTION: The interconnecting cables between the development kit and the LCD
touch screen monitor are required to be rated min. 60 deg.C, min. 30 Vdc , marked
VW-1 or FT- 1. The length of the cable should not exceed 3.05 m
ATTENTION: Les câbles d’interconnexion entre le kit de développement et le
moniteur à écran tactile LCD doivent être classé min. 60 degrés C, min. 30 Vdc,
marqué VW-1 ou FT-1. La longueur du câble ne doit pas dépasser 3,05 m
Regulatory Notice
Federal Communication Commission (FCC) – USA
This device complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference that
may cause undesired operation. Page 10

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy, and if it is not installed and used in accordance with
the instruction manual, it may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his
own expense.
WARNING: Any changes or modifications to this product not expressly approved by
the party responsible for compliance could void the user’s authority to operate the
equipment
This equipment complies with ACTA TIA/EIA/IS-968-B-1 and Part 68 of the FCC
rules and the requirements adopted by the ACTA. On the base of this equipment
is a label that contains, among other information, a product identifier in the format
US: AAAEQ##TXXXX. If requested, this number must be provided to the telephone
company.
This equipment uses the following USOC jacks: RJ45
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total REN, contact the local telephone
company. The REN for this product is separately shown on the label and also
part of the product identifier that has the format US: AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the telephone network, the telephone company
will notify you in advance that temporary discontinuance of service may be required
until the problem is resolved. But if advance notice is not practical, you will be
notified by the telephone company as soon as possible. You will be advised
Page 11

of your right to file a complaint with the FCC if you believe it is necessary. The
telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens the
telephone company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
The telephone company may ask that you disconnect this equipment from
the network until the problem has been corrected or until you are sure that the
equipment is not malfunctioning.
If you experience trouble with this equipment, or repair or warranty information,
please contact the following address and phone number for information.
Fortinet Inc.
899 Kifer Road, Sunnyvale, CA 94086 USA
1-866-393-9960 (US and Canada)
1-613-725-2466 (International)
It is recommended that the customer install an AC surge arrester in the AC outlet to
which this device is connected. This is to avoid damaging the equipment caused
by local lightning strikes and other electrical surges.
This equipment may not be used on coin service provided by the telephone
company. Connection to party line service is subject to state tariffs.
Industry Canada Equipment Standard for Digital Equipment (ICES) – Canada
CAN ICES-3 (A) / NMB-3 (A)
This digital apparatus does not exceed the Class A limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regula¬tions of the
Canadian Department of Communications.
Cet appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe A prescrites dans le Règlement
sur le brouillage radioélectrique édicte par le ministère des Communications du
Canada.
Industry Canada (IC CS) – Canada
NOTICE: This product meets the applicable Industry Canada terminal technical
specifications. This is confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was performed based on a
Declaration of Conformity indicating that Industry Canada technical specifications
Page 12

were met. It does not guarantee the equipment will operate to the user’s
satisfaction.
AVIS: Ce produit est conforme aux spécifications techniques terminales applicables
d’Industrie Canada. Cette conformité est confirmée par le numéro d’enregistrement.
Le sigle IC, placé devant le numéro d’enregistrement, signifie que l’enregistrement
s’est effectué conformément à une déclaration de conformité et indique quelles
spécifications techniques d’Industrie Canada ont été respectées. Il ne garantit pas
que le matériel fonctionnera à la satisfaction de l’utilisateur.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is
NAN. The REN assigned to each terminal equipment provides an indication of the
maximum number of terminals allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of devices subject
only to the requirement that the sum of the Ringer Equivalence Numbers of all the
devices does not exceed five.
AVIS: L’indice d’équivalence de la sonnerie (IES) du présent matériel est de NAN.
L’IES assigné à chaque dispositif terminal indique le nombre maximal de terminaux
qui peuvent être reliés à une interface téléphonique. La terminaison d’une interface
peut consister en une combinaison quelconque de dispositifs, à la seule condition
que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs
n’excède pas 5.
European Conformity (CE) - EU
This is a Class A product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
Page 13

License Agreement
Fortinet®, FortiGate®, and FortiGuard®are registered trademarks of Fortinet, Inc., and other Fortinet names may also be trademarks, registered or otherwise, of
Fortinet. All other product or company names may be trademarks of their respective owners.Copyright © 2015Fortinet, Inc.,All Rights reserved. Contents and terms
aresubject to change by Fortinet without prior notice.No part of this publication may be reproduced in any form or by any means or used to make any derivative such
as translation, transformation, or adaptation without permission from Fortinet, Inc., as stipulated by the United States Copyright Act of 1976.
Product License Agreement
The parties to this agreement are you, the end customer, and either (i) where you have purchased your Product within the Americas, Fortinet, Inc., or (ii) where
you have purchased your Product outside of the Americas, Fortinet Singapore Private Limited (each referred to herein as “Fortinet”).CAREFULLY READ THE FOL-
LOWING LEGAL AGREEMENT (THE OR THIS “AGREEMENT” OR “EULA”). USE OR INSTALLATION OF FORTINET PRODUCT(S) AND ANY UPDATES THERETO, INCLUDING
HARDWARE APPLIANCE PRODUCTS, SOFTWARE AND FIRMWARE INCLUDED THEREIN BY FORTINET, AND STAND-ALONE SOFTWARE PRODUCTSSOLD BY FORTINET
(TOGETHER, THE “PRODUCTS”)CONSTITUTES ACCEPTANCE BY YOU OF THE TERMS IN THIS AGREEMENT, AS AMENDED OR UPDATED FROM TIME TO TIME IN FORTI-
NET’S DISCRETION BY FORTINET PUBLISHING AN AMENDED OR UPDATED VERSION. FORTINET SHALL NOT BE BOUND BY ANY ADDITIONAL AND/OR CONFLICTING
PROVISIONS IN ANY ORDER, RELEASE, ACCEPTANCE OR OTHER WRITTEN CORRESPONDENCE OR OTHER WRITTEN OR VERBAL COMMUNICATION UNLESS EXPRESSLY
AGREED TO IN A WRITING SIGNED BY THE GENERAL COUNSEL OF FORTINET. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, DO NOT START THE
INSTALLATION PROCESS OR USE THE PRODUCTS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU SHOULDIMMEDIATELY, AND IN NO EVENT LATER
THAN FIVE (5) CALENDAR DAYS AFTER YOUR RECEIPT OF THE PRODUCTIMMEDIATELY NOTIFY THE FORTINET LEGAL TEAM IN WRITING AT [e-mail] OF
REQUESTED CHANGES TO THIS AGREEMENT.
1. License Grant.
This is a license, not a sales agreement, between you and Fortinet. The term “Software”, as used throughout this Agreement, includes all Fortinet and third party
rmware and software provided to you with, or incorporated into, Fortinet appliances and any stand-alone software provided to you by Fortinet, with the exception
of any open source software contained in Fortinet’s Products which is discussed in detail in section 15 below, and the term “Software” includes any accompany-
ing documentation, any updates and enhancements of the software or rmware provided to you by Fortinet, at its option. Fortinet grants to you a non-transferable
(except as provided in section 5 (“Transfer”) and section 15 (“Open Source Software”) below), non-exclusive, revocable (in the event of your failure to comply with
these terms or in the event Fortinet is not properly paid for the applicable Product) license to use the Softwaresolely for your internal business purposes (provided,
if a substantial portion of your business is to provide managed service provider services to your end-customers, you may use the Software embedded in FortiGate
and supporting hardware appliances to provide those services, subject to the other restrictions in this Agreement), in accordance with the terms set forth in this
Agreement and subject to any further restrictions in Fortinet documentation, and solely on the Fortinet appliance, or, in the case of blades, CPUs or databases, on the
single blade, CPU or database on which Fortinet installed the Software or, for stand-alone Software, solely on a single computerrunning a validly licensed copy of the
operating system for which the Software was designed, or, in the case of blades, CPUs or databases, on a single blade, CPU or database. For clarity, notwithstand-
ing anything to the contrary, all licenses of Software to be installed on blades, CPUs or databasesare licensed on a per single blade, solely forone blade and not for
multiple blades that may be installed in a chassis, per single CPU or per single database basis, as applicable. The Software is “in use” on any Fortinet appliances
when it is loaded into temporary memory (i.e. RAM).You agree that, except for the limited, specic license rights granted in this section 1, you receive no license
rights to the Software.
2. Limitation on Use.
You may not attempt to, and, if you are a corporation, you are responsible to prevent your employees and contractors from attempting to, (a) modify, translate,
reverse engineer, decompile, disassemble, create derivative works based on, sublicense, or distribute the Software; (b) rent or lease any rights in the Software in
any form to any third party or make the Software available or accessible to third parties in any other manner; (c) except as provided in section 5, transfer assign or
sublicense right to any other person or entity, or (d) remove any proprietary notice, labels, or marks on theSoftware, Products, and containers.
3. Proprietary Rights.
All rights, title, interest, and all copyrights to the Software and any copy made thereof by you and to any Product remain with Fortinet. You acknowledge that no title
to the intellectual property in the Software or other Products is transferred to you and you will not acquire any rights to the Software or other Products except for the
specic license as expressly set forth in section 1 (“License Grant”) above. You agree to keep condential all Fortinet condential information and only to use such
information for the purposes for which Fortinet disclosed it.
4. Term and Termination.
Except for evaluation and beta licenses or other licenses where the term of the license is limited per the evaluation/beta or other agreement or in the ordering
documents, the term of the license is for the duration of Fortinet’s copyright in the Software. Fortinet may terminate this Agreement, and the licenses and other rights
herein, immediately without notice if you breach or fail to comply with any of the terms and conditions of this Agreement. You agree that, upon such termination, you
will cease using the Software and any Product and either destroy all copies of the Fortinet documentation or return all materials to Fortinet. The provisions of this
Agreement, other than the license granted in section 1 (“License Grant”), shall survive termination.
5. Transfer.
If you are a Fortinet contracted and authorized reseller or distributor of Products, you may transfer (not rent or lease unless specically agreed to in writing by
Fortinet) the Software to one end user on a permanent basis, provided that: (i) you ensure that your customer and the end user receives a copy of this Agreement,
is bound by its terms and conditions, and, by selling the Product or Software, you hereby agree to enforce the terms in this Agreement against such end user, (ii)
you at all times comply with all applicable United States export control laws and regulations, and (iii) you agree to refund any fees paid to you by an end user who
purchased Product(s) from you but does not agree to the terms contained in this Agreement and therefore wishes to return the Product(s) as provided for in this
Page 14

Agreement. Further, if you are a non-authorized reseller of Products, you are not authorized to sell Product(s) or Software, but, regardless, by selling Product(s) or
Software, you hereby agree you are bound by the restrictions and obligations herein and are bound to: (i) ensure that your customer and the end user receive a copy
of this Agreement andare bound in full by all restrictions and obligations herein(ii) enforce the restrictions and obligations in this Agreement against such customer
and/or end user, (iii) comply with all applicable United States export control laws and regulations and all other applicable laws, and (iv) refund any fees paid to you
by a customer and/or end user who purchased Product(s) from you but does not agree to the restrictions and obligations contained in this Agreement and therefore
wishes to return the Product(s) as provided for in this Agreement. Notwithstanding anything to the contrary, distributors, resellers and other Fortinet partners (a) are
not agents of Fortinet and (b) are not authorized to bind Fortinet in any way.
6. Limited Warranty.
Fortinetprovides this limited warranty for its product only to the single end-user person or entity that originally purchased the Product from Fortinet or its authorized
reseller or distributor and paid for such Product. The warranty is only valid for Products which are properly registered on Fortinet’s Support Website,https://sup-
port.fortinet.com, or such other website as provided by Fortinet, or for which the warranty otherwise starts according to Fortinet’s policies. The warranty periods
discussed below will startaccording to Fortinet’s policies posted at http://www.fortinet.com/aboutus/legal.html or such other website as provided by Fortinet.It is
the Fortinet distributor’s and reseller’s responsibility to make clear to the enduser the date the product was originally shipped from Fortinet, and it is the enduser’s
responsibility to understand the original ship date from the party from which the end user purchased the product. All warranty claims must be submitted in writing
to Fortinet before the expiration of the warranty term or such claims are waived in full. Fortinet provides no warranty for any beta, donation or evaluation Products,
for any spare parts not purchased directly from Fortinet by the end-user, for any accessories, or for any stand-alone software.Fortinet warrants that the hardware
portion of the Products, including spare parts unless noted otherwise (“Hardware”) will be free from material defects in workmanship as compared to the functional
specicationsfor the period set forthas follows and applicable to the Product type (“Hardware Warranty Period”):a three hundred sixty-ve (365) day limited warranty
for the Hardware excluding spare parts, power supplies, and accessories (provided, solely with respect to FortiAP and Meru AP indoor Wi-Fi access point Hardware
appliance products and FortiSwitch Hardware appliance products other than the FortiSwitch-5000 series (for both excluding spare parts, power supplies, and
accessories), the warranty herein shall last from the start of the warranty period as discussed above until ve (5) years following the product announced end-of-life
date), and, forspare parts, power supplies, and accessories, solely aninety (90) dayslimited warranty.Fortinet’s sole obligation shall be to repair or offer replacement
Hardware for the defective Hardwareat no charge to the original owner. This obligation is exclusive of transport fees, labor, de-installation, installation, recongura-
tion, or return shipment and handlingfees and costs, and Fortinet shall have no obligation related thereto. Such repair or replacement will be rendered by Fortinet at
an authorized Fortinet service facility as determined by Fortinet. The replacement Hardware need not be new or of an identical make, model, or part; Fortinet may, in
its discretion, replace the defective Hardware (or any part thereof) with any reconditioned Product that Fortinet reasonably determines is substantially equivalent (or
superior) in all material respects to the defective Hardware. TheHardware Warranty Period for the repaired or replacement Hardware shall be for the greater of the
remaining Hardware Warranty Period or ninety days from the delivery of the repaired or replacement Hardware. If Fortinet determines in its reasonable discretion
that a material defect is incapable of correction or that it is not practical to repair or replace defective Hardware, the price paid by the original purchaser for the
defective Hardware will be refunded by Fortinet upon return to Fortinet of the defective Hardware. All Hardware (or part thereof) that is replaced by Fortinet, or for
which the purchase price is refunded, shall become the property of Fortinet upon replacement or refund.Fortinet warrants that the software as initially shipped with
theHardware Productswill substantially conform to Fortinet’s then current functional specications for the Software, as set forth in the applicable documentation for a
period of ninety (90) days (“Software Warranty Period”), if the Software is properly installed on approved Hardware and operated as contemplated in its documenta-
tion. Fortinet’s sole obligationshall be to repair or offer replacement Software for the non-conforming Software with software that substantially conforms to Fortinet’s
functional specications. This obligation is exclusive of transport fees, labor, de-installation, installation, reconguration, or return shipment and handling fees and
costs, and Fortinet shall have no obligation related thereto. Except as otherwise agreed by Fortinet in writing, the warranty replacement Software is provided only to
the original licensee, and is subject to the terms and conditions of the license granted by Fortinet for the Software. The Software Warranty Period shall extend for an
additional ninety (90) days after any warranty replacement software is delivered. If Fortinet determines in its reasonable discretion that a material non-conformance
is incapable of correction or that it is not practical to repair or replace the non-conforming Software, the price paid by the original licensee for the non-conforming
Software will be refunded by Fortinet; provided that the non-conforming Software (and all copies thereof) is rst returned to Fortinet. The license granted respecting
any Software for which a refund is given automatically terminates immediately upon refund. For purpose of the above hardware and software warranties, the
term “functional specications” means solely those specications authorized and published by Fortinet that expressly state in such specications that they are the
functional specications referred to in this section 6 of this Agreement, and, in the event no such specications are provided to you with the Software or Hardware,
there shall be no warranty on such Software.
7. Disclaimer of Other Warranties and Restrictions.
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED IN SECTION 6 ABOVE, THE PRODUCT AND SOFTWARE ARE PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY
KIND INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY, IMPLIED OR EXPRESS WARRANTY OF MERCHANTABILITY, OR WARRANTY FOR FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURA-
TION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS FROM THE DATE OF ORIGINAL SHIPMENT FROM FORTINET. EXCEPT AS EXPRESSLY
COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH
THE PURCHASER OF THE PRODUCT. NOTWITHSTANDING ANYTHING TO THE CONTRARY, THE HARDWARE WARRANTY PERIOD DISCUSSED ABOVE DOES NOT APPLY
TO CERTAIN FORTINET PRODUCTS, INCLUDING FORTITOKEN WHICH HAS A 365 DAY WARRANTY FROM THE DATE OF SHIPMENT FROM FORTINET’S FACILITIES, AND
THE SOFTWARE WARRANTY DOES NOT APPLY TO CERTAIN FORTINET PRODUCTS, INCLUDING FORTIGATE-ONE AND VDOM SOFTWARE. YOU HEREBY ACKNOWLEDGE
AND AGREE THAT NO VENDOR CAN ASSURE COMPLETE SECURITY AND NOTHING HEREIN OR ELSEWHERE SHALL BE DEEMED TO IMPLY A SECURITY GUARANTEE OR
ASSURANCE.
The warranty in Section 6 above does not apply if the Software, Product or any other equipment upon whichthe Software is authorized to be used(a) has been
altered, except by Fortinet or its authorized representative, (b) has not been installed, operated, repaired, updated to the latest version, or maintained in accordance
with instructions supplied by Fortinet, (c) has been subjected to abnormal physical or electrical stress, misuse, negligence, oraccident; (d) is licensed for beta,
evaluation, donation, testing or demonstration purposes or for which Fortinet does not charge a purchase price or licensefee. In the case of beta, testing, evaluation,
donation or free Software or Product, the enduser acknowledges and agrees that such Software or Product may contain bugs or errors and could cause system fail-
ures, data loss and other issues, and the end user agrees that such Software or Product is provided “as-is” without any warranty whatsoever, and Fortinet disclaims
any warranty or liability whatsoever. An end user’s use of evaluation or beta Software or Product is limited to thirty (30) days from original shipment unless otherwise
agreed in writing by Fortinet.
8. Governing Law.
Any disputes arising out of this Agreement or Fortinet’s limited warrantyshall be governed by the laws of the state of California, without regard to the conict of laws
principles. In the event of any disputes arising out of this Agreement or Fortinet’s limited warranty, the parties submit to the jurisdiction of the federal and state courts
located in Santa Clara County, California, as applicable.
9. Limitation of Liability.
TO THE MAXIMUM EXTENT PERMITTED BY LAW AND NOTWITHSTANDING ANYTHING TO THE CONTRARY, FORTINET IS NOT LIABLE UNDER ANY CONTRACT, NEGLI-
GENCE, TORT, STRICT LIABILITY, INFRINGEMENT OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT OR SERVICE OR ANY DAMAGES
OF ANY KIND WHATSOEVER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL,
LOSS OF PROFIT, LOSS OF OPPORTUNITY, LOSS OR DAMAGE RELATED TO USE OF THE PRODUCT OR SERVICE IN CONNECTION WITH HIGH RISK ACTIVITIES, DE-
INSTALLATION AND INSTALLATION FEES AND COSTS, DAMAGE TO PERSONAL OR REAL PROPERTY, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION,
Page 15

COMPUTER SECURITY BREACH, COMPUTER VIRUS INFECTION, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT
INCLUDING ANY PRODUCT RETURNED TO FORTINET FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR
ARISING OUT OF ANY BREACH OF THE LIMITED WARRANTY IN SECTION 6 ABOVE, EVEN IF FORTINET HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
THE SOLE REMEDY FOR A BREACH OF THE LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT AS
SPECIFICALLY STATED IN SECTION 6 ABOVE.
10. Import / Export Requirements; FCPA Compliance.
You are advised that the Products may be subject to the United States Export Administration Regulations and other import and export laws; diversion contrary to
United States law and regulation is prohibited. You agree to comply with all applicable international and national laws that apply to the Products as well as enduser,
end-use, and destination restrictions issued by U.S. and other governments. For additional information on U.S. export controls see www.bis.doc.gov. Fortinet
assumes no responsibility or liability for your failure to obtain any necessary import and export approvals, and Fortinet reserves the right to terminate or suspend
shipments, services and support in the event Fortinet has a reasonable basis to suspect any import or export violation. You represent that neither the United States
Bureau of Industry and Security nor any other governmental agency has issued sanctions against you or otherwise suspended, revoked or denied your export privi-
leges. You agree not to use or transfer the Products for any use relating to nuclear, chemical or biological weapons, or missile technology, unless authorized by the
United States Government by regulation or specic written license. Additionally, you agree not to directly or indirectly export, import or transmit the Products contrary
to the laws or regulations of any other governmental entity that has jurisdiction over such export, import, transmission or use.Furthermore, you represent that you
understand, and you hereby agree to comply with, all requirements of the U.S. Foreign Corrupt Practices Act and all other applicable laws. For beta, testing, evalu-
ation, donation or free Products and/or related services, you hereby agree, represent and warrant to Fortinet that (a) receipt of the Products and/or services comply
with all policies and you have obtained all necessary approvals for such Products and/or services, (b) the Products and/or services are not provided in exchange for
Fortinet maintaining current business or for new business opportunities, and (c) the Products and/or services are not being received for the benet of, and are not
being transferred to, any government entity, representative or afliate.
11. U.S. Government End Users.
The Software and accompanying documentation are deemed to be “commercial computer software” and “commercial computer software documentation,” respec-
tively, pursuant to DFAR Section 227.7202 and FAR Section 12.212, as applicable. Any use, modication, reproduction, release, performance, display or disclosure
of the Software and accompanying documentation by the United States Government shall be governed solely by the terms of this Agreement and shall be prohibited
except to the extent expressly permitted by the terms of this Agreementand its successors.
12. Tax Liability.
You agree to be responsible for payment of any sales or use taxes imposed at any time on this transaction.
13. General Provisions.
Except as specically permitted and required in section 5 (“Transfer”) above, youagreenot to assign this Agreement or transfer any of the rights or obligations under
this Agreement without the prior written consent of Fortinet. This Agreement shall be binding upon, and inure to the benet of, the successors and permitted assigns
of the parties. The United Nations Convention on Contracts for the International Sales of Goods is expressly excluded. This Agreement and other Fortinet agreements
may be amended or supplemented only by a writing that refers explicitly to the agreement signed on behalf of both parties, or, for this Agreement, as otherwise
expressly provided in the lead-in above Section 1 above, provided, notwithstanding anything to the contrary and except for this Agreement which may be amended
or updated as expressly provided in the lead-in above Section 1 above, for any amendment or other agreement to be binding on Fortinet, such amendment or other
agreement must be signed by Fortinet’s General Counsel. No waiver will be implied from conduct or failure to enforce rights nor effective unless in a writing signed
on behalf of the party against whom the waiver is asserted. If any part of this Agreement is found unenforceable, that part will be enforced to the maximum extent
permitted and the remainder shall continue in full force and effect. You acknowledge that you have read this Agreement, understand it, and agree to be bound by its
terms and conditions.
14. Privacy.
For information regarding Fortinet’s collection, use and transfer of your personal informationplease read the Fortinet privacy policy on the Fortinet web site (http://
www.fortinet.com/aboutus/privacy.html).
15. Open Source Software.
Fortinet’s products may include software modules that are licensed (or sublicensed) to the user under the GNU General Public License, Version 2, of June 1991
(“GPL”) or GNU Lesser General Public License, Version 2.1, of February 1999 (“LGPL”) or other open source software licenses which, among other rights, permit the
user touse, copy, modify and redistribute modules, or portions thereof, and may also require attribution disclosures and access to the source code (“Open Source
Software”). The GPL requires that for any Open Source Software covered under the GPL, which is distributed to someone in an executable binary format, that the
source code also be made available to those users. For any Open Source Software covered under the GPL,the source code is made available on this CD or download
package. If any Open Source Software licenses require that Fortinet provide rights to use, copy or modify a Open Source Software program that are broader than
the rights granted in this agreement, then such rights shall take precedence over the rights and restrictions herein.Fortinet will provide, for a charge reecting our
standard distribution costs, the complete machine-readable copy of the modied software modules. To obtain a complete machine-readable copy, please send
your written request, along with a check in the amount of US $25.00, to General Public License Source Code Request, Fortinet, Inc., 899 Kifer Rd, Sunnyvale, CA
94086 USA. In order to receive the modied software modules, you must also include the following information: (a) Name, (b) Address, (c) Telephone number, (d)
E-mail Address, (e) Product purchased (if applicable), (f) Product Serial Number (if applicable). All open sourcesoftware modules are licensed free of charge. There
is no warranty for these modules, to the extent permitted by applicable law. The copyright holders provide these software modules “AS-IS” without warranty of any
kind, either expressed or implied. In no event will the copyright holder for the open source software be liable to you for damages, including any special, incidental
or consequential damages arising out of the use or inability to use the software modules, even if such holder has been advised of the possibility of such damages.A
full copy of this license, including additional open source software license disclosures and third party license disclosures applicable to certain Fortinet products, may
obtained by contacting Fortinet’s Legal Department at [email protected].
Page 16

GNU GENERAL PUBLIC LICENSE GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this Gen-
eral Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or any derivative work
under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term “modication”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modication are not covered by this License; they are outside its scope. The act of running the Program is not
restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the
Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any war-
ranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy,
and you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modications or
work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modied les to carry prominent notices stating that you changed the les and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a
whole at no charge to all third parties under the terms of this License.
c) If the modied program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary
way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a war-
ranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is
interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)
These requirements apply to the modied work as a whole. If identiable sections of that work are not derived from the Program, and can be reasonably considered
independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But
when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License,
whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.. Thus, it is not the intent of this section
to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective
works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a
volume of a storage or distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above
provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections1 and 2 above on a
medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distri-
bution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily
used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial
distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
Source code for a work means the preferred form of the work for making modications to it. For an executable work, complete source code means all the source
code for all modules it contains, plus any associated interface denition les, plus the scripts used to control compilation and installation of the executable. However,
as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components
(compiler, kernel, and so on) of the operating system on which the executable runs, unless that componentitself accompanies the executable.If distribution of execut-
able or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts
as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, subli-
cense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from
you underthis License will not have their licenses terminated so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its
derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on
the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works
based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted
herein. You are not responsible for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on
you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If
you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not
distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or
indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a
whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the
sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous
contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide
if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who
places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or
among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit
to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program species
a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever
Page 17