ATCOM IPPBX IP02 User manual

IPPBX IP02 User Manual
For Firmware Version: V3.0
2013-12-11

IPPBX IP02 User Manual
~ 0 ~ ATCOM TECHNOLOGY CO., LIMITED
Contents
Contents........................................................................................................................................................................... 0
1. Introduction.............................................................................................................................................................. 3
2. Connection and Change IP Address of IPPBX.................................................................................................. 4
2.1 Connection................................................................................................................................................... 4
2.2 WAN Settings............................................................................................................................................... 5
2.3 LAN Settings................................................................................................................................................ 6
2.4 DHCP Server............................................................................................................................................... 7
2.5 System Status.............................................................................................................................................. 8
3. Create local extensions and make interior calls ................................................................................................ 9
3.1 FXS extensions............................................................................................................................................ 9
3.2 SIP extensions........................................................................................................................................... 12
3.2.1 Add new extensions........................................................................................................................ 12
3.2.2 Modify extensions.......................................................................................................................... 16
3.3 Register onto IPPBX with your IP phone............................................................................................... 16
3.4 Extensions Status...................................................................................................................................... 16
3.5 Feature Codes........................................................................................................................................... 17
3.6 SMTP Settings........................................................................................................................................... 20
3.7 Conference................................................................................................................................................. 21
3.8 Paging / Intercom...................................................................................................................................... 21
3.9 Options........................................................................................................................................................ 22
4. Create SIP trunk to communicate with VoIP provider..................................................................................... 23
4.1 Create SIP trunks...................................................................................................................................... 23
4.2 Check SIP Trunk Status........................................................................................................................... 25
4.3 Make outbound calls.................................................................................................................................26

IPPBX IP02 User Manual
~ 1 ~ ATCOM TECHNOLOGY CO., LIMITED
4.4 Make inbound calls................................................................................................................................... 27
5. Create Service Provider to connect two IP PBXes.......................................................................................... 29
5.1 Create Service Provider........................................................................................................................... 29
5.2 Check Service Provider Status ............................................................................................................... 30
5.3 Make outbound calls.................................................................................................................................30
5.4 Make inbound calls................................................................................................................................... 31
6. Make outbound/inbound calls to/from PSTN network..................................................................................... 32
6.1 Make sure FXO modules are installed................................................................................................... 32
6.2 Make outbound calls.................................................................................................................................33
6.3 Make inbound calls................................................................................................................................... 34
7. Inbound Call Control............................................................................................................................................. 35
7.1 Time Interval................................................................................................................................................ 35
7.2 Hunt / Ring Group....................................................................................................................................... 36
7.3 Queue........................................................................................................................................................... 37
7.4 IVR................................................................................................................................................................ 39
7.5 DISA.............................................................................................................................................................. 41
7.6 Call Back...................................................................................................................................................... 42
7.7 Inbound to Outbound .................................................................................................................................... 44
7.7.1 FXO trunk to SIP trunk ...................................................................................................................... 44
7.7.2 SIP trunk to FXO trunk.................................................................................................................... 45
7.8 Custom Dialplan............................................................................................................................................. 46
7.9 Blacklist ........................................................................................................................................................ 46
7.10 SIP Settings.................................................................................................................................................. 47
8. Audios..................................................................................................................................................................... 49
8.1 Music On Hold............................................................................................................................................. 49

IPPBX IP02 User Manual
~ 2 ~ ATCOM TECHNOLOGY CO., LIMITED
8.2 Custom Prompts......................................................................................................................................... 49
8.3 Language Setting........................................................................................................................................ 49
9. Network Settings................................................................................................................................................... 49
9.1 Web Access................................................................................................................................................. 49
9.2 Firewall......................................................................................................................................................... 50
9.3 Port Forwarding........................................................................................................................................... 53
9.4 DDNS............................................................................................................................................................ 54
9.5 VLAN............................................................................................................................................................. 54
9.6 VPN............................................................................................................................................................... 54
10. System Settings ............................................................................................................................................ 55
10.1 Change Password.................................................................................................................................... 55
10.2 Auto Provisioning................................................................................................................................... 55
10.2.1 Auto Provisioning .......................................................................................................................... 55
10.2.2 Configured Phones....................................................................................................................... 56
10.2.3 Unconfigured Phones................................................................................................................... 58
10.2.4 Upload Phone Configure.............................................................................................................. 58
10.3 Date && Time............................................................................................................................................ 58
10.4 External Storage....................................................................................................................................... 59
10.5 Firmware Upgrade.................................................................................................................................... 61
10.6 Backup and Restore................................................................................................................................. 61
10.7 Reboot && Reset...................................................................................................................................... 62
11. Reports........................................................................................................................................................... 64
11.1 Call Detail Records................................................................................................................................... 64
11.2 Syslog...................................................................................................................................................... 64
12. Web Interface for extension......................................................................................................................... 65

IPPBX IP02 User Manual
~ 3 ~ ATCOM TECHNOLOGY CO., LIMITED
1. Introduction
Overview of the IPPBX
ATCOM IPPBX is a SIP-based IP voice switch with a small embedded OS and rich GUI (Graphical User
Interface), providing a powerful networking and corporate communication function. With it, users can quickly
deploy an internal communication system for enterprise, as well as configure conveniently applications and
value-added services on IP PBX via its GUI, to fit enterprise's own various demands.
Targeting for SOHO user and SMB market with an easy to use graphical interface, IP02 provides a cost-saving
solution on their telecommunication/data needs. With IP02, company with branch offices in different countries can
be easily combined together to work like a virtual single office through internet.
Hardware Specifications
CPU
400MHz Blackfin 532 Chip
NAND Flash
256 M
SDRAM
64 M
Analog Port
2
Network Interface
WAN,LAN
Measurement and Weight
Inner box
100 * 100 * 28mm
G.W./unit
0.36KG
Carton MEAS
456 * 442 * 362 mm
Units per Carton
21 units/ CTN
G.W./CTN
17 KG/CTN
Function Features
Voicemail
Authentication before call outbound
Voicemail to Email
User WEB portal
Blind/Attended Transfer
Blacklist
Call Forward
Call Detail Records(CDR)
Call Parking
Conference
Do not Disturb (DND)
Ring Group
Group / Directed Pickup
Call Queue
Call Recording
Call Back
Call Waiting
IVR
Call Routing
Intercom/Paging
Caller ID
IP Restriction
BLF Support
Firewalls
Music on Hold
DDNS
Video Call
DHCP Server
PPPoE
VLAN

IPPBX IP02 User Manual
~ 4 ~ ATCOM TECHNOLOGY CO., LIMITED
Port Forward
VPN client
External Storage
Auto Provisioning
Storage Quota Privilege
Custom Dialplan
Auto call recording
Integrated built-in packet capture tools
2. Connection and Change IP Address of IPPBX
2.1 Connection
The default IP address of IPPBX is:
WAN: 192.168.1.100/255.255.255.0
LAN: 192.168.10.1/255.255.255.0
There are two network interfaces (WAM and LAN) in IP02, it can be used as a router (WAN port connects Internet
and LAN port connects local network):
Internet
WAN
Ext:6001
192.168.10.3 Ext:6002
192.168.10.4
Ext:6003
192.168.10.5 Ext:6004
192.168.10.6
Ext:6005
192.168.10.7
Ext:6006
IVSP
LAN
192.168.10.1
WAN
tpcard.vicp.cc
If you do not want IPPBX to act as a router and put it behind a router, please connect WAN port to your local
network:
Internet
Ext:6001
192.168.1.3 Ext:6002
192.168.1.4
Ext:6003
192.168.1.5 Ext:6004
192.168.1.6
Ext:6005
192.168.1.7
WAN
192.168.1.100

IPPBX IP02 User Manual
~ 5 ~ ATCOM TECHNOLOGY CO., LIMITED
NOTE: It’s recommended to re-set IP address of IPPBX via WAN at the first time, Since DHCP server on LAN
port is enabled by default, Other DHCP client enabled devices in the network may obtain IP from IPPBX rather
than real DHCP server. And then access IPPBX via LAN after configuring LAN settings.
1) Connect IPPBX to your PC directly or through switch.
Make sure IP address of your PC is in network 192.168.1.0/255.255.255.0, if not, you need to appoint an IP
address for your PC, for example, 192.168.1.3
2) Login IPPBX as administrator via WEB GUI
User: admin
Password: atcom
NOTE: Language option will be accomplished in future versions, currently, only English is supported. So it’s not
selectable now.
3) Go to Network Settings ->WAN.
Re-set IP of WAN port.
4) Go to Network Settings -> LAN.
Re-set IP of LAN port.
2.2 WAN Settings
There are three ways to set an IP address to WAN port: DHCP, Static IP, PPPoE.
DHCP
IPPBX will obtain an IP address automatically from DHCP server when rebooting. It’s not recommended to
choose this option unless there is a reserved IP for IPPBX in DHCP server so that IPPBX can keep the same IP
all the time.

IPPBX IP02 User Manual
~ 6 ~ ATCOM TECHNOLOGY CO., LIMITED
Static IP
Set an IP address manually according to the real network environment. If IPPBX is behind a router, the gateway
is usually set to the IP of the router.
PPPoE
IPPBX will obtain an IP address automatically after establishing a connection to PPPoE server with username
and password.
2.3 LAN Settings
DHCP
Yes: IPPBX will get an IP address from DHCP server, Not recommended.
No: Configure IP address manually for LAN. Default is NO.
NAT
Yes: IPPBX will act as a router, all the devices connected to LAN can access the network connected to WAN.
Default is Yes.
No: Networks connected to LAN and WAN are independent.
NOTE: IP addresses of LAN and WAN can’t be in the same network.
For example: IP of WAN is 192.168.1.100/255.255.255.0, IP of LAN can’t be 192.168.1.xx/255.255.255.0
Hostname

IPPBX IP02 User Manual
~ 7 ~ ATCOM TECHNOLOGY CO., LIMITED
Set the host name for IPPBX.
IP Address / Subnet Mask
Set the IP address / subnet mask for LAN network interface.
Gateway
Set the Gateway for LAN network interface.
Primary DNS / Secondary DNS
Set the DNS server for LAN network interface.
IP Address 2 / Subnet Mask 2
Set the failover IP address for LAN network interface.
2.4 DHCP Server
The Dynamic Host Configuration Protocol (DHCP) is a network protocol used to configure devices that are
connected to a network (known as hosts) so they can communicate on that network using the Internet Protocol
(IP). It involves clients and a server operating in a client-server model.
Enable DHCP server
Check to enable DHCP server.
Default Gateway
Gateway information that will be used in DHCP client.
Subnet Mask
Subnet Mask that will be used in DHCP client.
Primary DNS / Secondary DNS
DNS information that will be used in DHCP client.
Start IP / End IP

IPPBX IP02 User Manual
~ 8 ~ ATCOM TECHNOLOGY CO., LIMITED
IP address pool, IP in which will be assigned to DHCP client.
Lease Time
The amount of time the address is leased for DHCP client, When the lease is up, it either renews or gets a new
address.
NOTE: All the network settings will take effect immediately when you save the change.
2.5 System Status

IPPBX IP02 User Manual
~ 9 ~ ATCOM TECHNOLOGY CO., LIMITED
1) General
Product Model
Show the model of this IPPBX
Firmware Version
Show the firmware version
System Uptime
Show the time how long the system has been running
System Current Time
Show the current time
2) Network
Show the network setting of IPPBX
3) Peripheral
Show what kinds of / how many modules are detected.
3. Create local extensions and make interior calls
There are two kinds of extensions in IPPBX: FXS extensions and SIP extensions.
3.1 FXS extensions
It needs support of FXS module, the module installed in IP02 can be:
AX210S: dual FXS port
AX210XS: one FXO port and one FXS port
Analog phone is available to make calls once connected to the corresponding FXS port, IPPBX configures FXS
extension automatically when FXS module is detected and they can’t be deleted.
NOTE: FXS extension number range is defined in PBX Settings -> Options -> Extension Preference, changing
it can change the FXS extension number.
1) General
Extension
Extension number, i.e. 6101, it is associated with this particular user / phone.

IPPBX IP02 User Manual
~ 10 ~ ATCOM TECHNOLOGY CO., LIMITED
Port
The analog port bound with extension.
Name
A character-based name for this extension, i.e. ‘Bob Jones’.
Caller ID
CID showed in the other’s phone during a call, default is Extension.
2) Voice Mail
Enable Voice Mail
Check this option to enable voice mail account for the extension. Enabled by default.
Voice Mail Access PIN Code
Password for accessing this voice mail account, default is 123456. It’s also the password for extension to login his
administration web page.
3) Mail Setting
Enable Sending Voice Mail
Check this option to enable PBX send new voicemail to Email address below as an attachment.
Email Address
The Email address that new voicemail will be send to when Enable Sending Voice Mail is enabled and PBX
settings -> SMTP settings is right set.
4) Volume Settings
Rxgain
Adjust the volume sent to FXS extension. There are 3 options: 20%,60%,100%.
Txgain
Adjust the volume sent out by FXS extension. There are 3 options: 20%,60%,100%.
5) Flash
Hook Flash Detection Time
Sets the amount of time, in milliseconds, that the hook-flash must remain depressed in order for IPPBX to
consider such an event a valid flash event. The default value of it is 1250 ms and it can be configured in 1 ms
increments.
Sequential Hook Flash Interval
Sets the amount of time, in milliseconds, that must have passed since the last hook-flash event received by
IPPBX before it will recognize a second event. If a second event occurs in less time than defined in here, then
IPPBX will ignore the event. The default value is 750 ms, and it can be configured in 1 ms increments.
6) Follow Me
Follow me is a feature to let an incoming call to a called party to be redirected to a third party, the third party can
be a voicemail box, ring group, mobile telephone and so on.

IPPBX IP02 User Manual
~ 11 ~ ATCOM TECHNOLOGY CO., LIMITED
When callee is No Answer / Busy / Unreachable, incoming calls will go to voicemail by default, if voicemail is
disabled, call will be hung up.
7) Other Options
Pickup Group
Allows extension to answer someone else’s telephone call by dialing the group call pickup code (defined in PBX
Settings->Feature Codes->General), the two extensions must be in a same pickup group.
IPPBX supports 10 pickup groups: 0-10, None means the extension belongs to none pickup group, extensions in
group None can’t pick up others’ ring call and also can’t be picked up by others.
Call Waiting
Check this option to enable the Call Waiting capability for this extension. Then the extension can answer a new
call when it is already on the line. If this Option is checked, the follow me option “When busy” will be unavailable.
Ring Out
Set the ring timeout for this extension. IPPBX will stop ringing the extension if the time is up and there is still no
answer.

IPPBX IP02 User Manual
~ 12 ~ ATCOM TECHNOLOGY CO., LIMITED
Use Web Interface
When checked, user can login the administration web page of this extension with extension number and voice
mail pin code as username and password.
Storage Quota Privilege
Set capacity of disk space for this extension to store voicemail in IPPBX.
Restricted: 1 M
Basic: 2 M
Regular: 3 M
Privileged: 4 M
Super: 5 M
NOTE: If you set System Settings -> External Storage and set Move Files Created Before 0 days ago. This
storage limitation will be of no use.
DND
Do not disturb, once checked, the extension will be unavailable.
Call Recording
Check this option to record all interior calls made by this extension, user can check the recordings on the personal
web portal and with record account (password is the same with admin) too.
3.2 SIP extensions
SIP extension is a SIP Account that allows an IP Phone or an IP SoftPhone client to register on IPPBX. It can be
created / modified / deleted one by one or in batch.
3.2.1 Add new extensions
a. Add single extension
Click to add an extension
NOTE: SIP extension number range is defined in PBX Settings -> Options -> Extension Preference,changing
it can create extensions in others number range.
1) General
Type
SIP
Name
A character-based name for this extension, i.e. ‘Bob Jones’
Caller ID
CID showed in the other’s phone during a call, default is Extension.
Extension
Extension number, i.e. 6000, it is associated with this particular user / phone.
Password

IPPBX IP02 User Manual
~ 13 ~ ATCOM TECHNOLOGY CO., LIMITED
Authentication for SIP phone to register and make calls.
2) SIP Setting
NAT
Try this setting when IPPBX is on a public IP, communicating with devices hidden behind a NAT device
(broadband router). If you have one-way audio problems, you usually have problems with your NAT configuration
or your firewall’s support of SIP+RTP ports.
Can Reinvite
By default, IPPBX will route the media streams from SIP endpoints through itself. Enabling this option causes
IPPBX to attempt to negotiate the endpoints to route the media stream directly, bypassing IPPBX. It is not always
possible for IPPBX to negotiate endpoint-to-endpoint media routing.
DTMF Mode
Select DTMF sending mode, there are three modes: rfc2833, inband, info. The DTMF setting in here should be
as same as that in SIP phone, otherwise IPPBX will not detect the users’ input correctly during a call.
Auto means IPPBX will match anyone of them according to the setting of SIP phone.
Transport
The transplant protocol type for VoIP data package, default is UDP. Please make sure TCP is enabled in PBX
Settings -> SIP Settings before using TCP.
SIP Quality
Check this option to force keep alive.
3) Voice Mail
Enable Voice Mail
Check this option to enable voice mail account for the extension. Enabled by default.
Voice Mail Access PIN Code
Password for accessing this voice mail account, default is the extension number. It’s also the password for
extension to login his administration web page.
4) Mail Setting
Enable Sending Voice Mail
Check this option to enable PBX send new voicemail to Email address below as an attachment.
Email Address
The Email address that new voicemail will be send to when Enable Sending Voice Mail is enabled and PBX
settings -> SMTP settings is right set.
5) Follow Me
Follow me is a feature to let an incoming call to a called party to be redirected to a third party, the third party can
be a voicemail box, ring group, mobile telephone and so on.
When callee is No Answer / Busy / Unreachable, incoming calls will go to voicemail by default, if voicemail is
disabled, call will be hung up.
6) Other Options

IPPBX IP02 User Manual
~ 14 ~ ATCOM TECHNOLOGY CO., LIMITED
Pickup Group
Allows extension to answer someone else’s telephone call by dialing the group call pickup code (defined in PBX
Settings->Feature Codes->General), the two extensions must be in a same pickup group.
IPPBX supports 10 pickup groups: 0-10, None means the extension belongs to none pickup group, extensions in
group None can’t pick up others’ ring call and also can’t be picked up by others.
Call Waiting
Check this option to enable the Call Waiting capability for this extension. Then the extension can answer a new
call when it is already on the line. It also needs the call waiting support of IP phone. If this Option is checked, the
follow me option “When busy” will be unavailable.
Ring Out
Set the ring timeout for this extension. IPPBX will stop ringing the extension if the time is up and there is still no
answer.
Use Web Interface
When checked, user can login the administration web page of this extension with extension number and voice
mail pin code as username and password.

IPPBX IP02 User Manual
~ 15 ~ ATCOM TECHNOLOGY CO., LIMITED
Storage Quota Privilege
Set capacity of disk space for this extension to store voicemail.
Restricted: 1 M
Basic: 2 M
Regular: 3 M
Privileged: 4 M
Super: 5 M
NOTE: If you have set System Settings -> External Storage and set Move Files Created Before 0 days ago.
This storage limitation will be of no use.
DND
Do not disturb, once checked, the extension will be unavailable.
Call Recording
Check this option to record all interior calls made by this extension, user can check the recordings on the personal
web portal and with record account(password is the same with admin) too.
Advanced Configuration
Preferred Codec
Set the allowed codec and priority for SIP phone. The options are below:
Audio: A-law, U-law, GSM, SPEEX, G726, G722, ADPCM, G729
Video: H261, H263, H263P, H264
NOTE: There must be at least one same audio/video codec chose in IPPBX extension settings and SIP phone
codec settings, otherwise, It’s impossible to make audio/video calls between IPPBX and SIP phone.
IP Restriction
Enable it to permit trusted IP/network register to this extension number. This is an useful way to improve the
security of IPPBX.

IPPBX IP02 User Manual
~ 16 ~ ATCOM TECHNOLOGY CO., LIMITED
Set trusted IP: xx.xx.xx.xx/255.255.255.255, for example: 192.168.1.160/255.255.255.255
Set trusted network: xx.xx.xx.xx/subnet mask, for example: 192.168.1.0/255.255.255.0
b. Click to add multiple extensions.
3.2.2 Modify extensions
a. Click behind an extension to edit the extension.
b. Choose one or more extensions, click to modify them simultaneously.
3.3 Register onto IPPBX with your IP phone
Login the web administration page of IP phone and set the account information.
After successfully register with 6000 and 6001, you can make interior calls among 6000, 6001, 6101(FXS) now.
3.4 Extensions Status

IPPBX IP02 User Manual
~ 17 ~ ATCOM TECHNOLOGY CO., LIMITED
This page is used to check the extensions status.
Idle: The extension is registered and idle.
Busy: The extension is on the phone.
Ringing: The extension is ringing.
Hold: The extension is on hold
Unavailable: The extension is not registered and unreachable.
NOTE: If this page response slowly, please be patient to wait the output before check other pages. Otherwise,
other pages cannot be displayed correctly since IPPBX is accessing database while status checking, and
database is locked for other pages’ request.
3.5 Feature Codes
1) General
Call Recording
Record a call while in the call.
Dial Call Recording Code to begin recording and dial it again to stop recording during a call.
Checking Voicemail

IPPBX IP02 User Manual
~ 18 ~ ATCOM TECHNOLOGY CO., LIMITED
Users can check their Voicemail by dialing this code on their phone.
Attended Transfer
Routed a call to a third party only if the third party answers the call. The call flow should be like below:
1. Phone A call B, B answers the call.
2. B presses feature code(*3) and C’s number to transfer the call to C
3. If C answers B’s call, B can talk to C and A is on hold
4. If Phone B hangs up, A will talk to C, transfer is successful.
4’ If Phone C hangs up, B connects back to A, transfer is failed
Blind Transfer
Blind transfer is when a call is routed to a third party, the original call is ended, and no check is made to determine
whether the transferred call is answered or if the number is busy.
The call flow should be like below:
1. Phone A call B, B answers the call.
2. B presses feature code(*03) and C’s number to transfer the call to C
Group Call Pickup
Pick up a ring call for other extensions in the same pickup group.
The call flow should be like below:
1. C calls A, phone A is ring, but A is not at his/her seat.
2. Extension A and B are in the same pick up group, B can dial Group Call Pickup code to pick up the ring call,
and talk to C.
Direct Call Pickup
Pick up a ring call for an appointed extension.The call flow should be like below:
1. C calls A, phone A is ring, but A is not at his/her seat.
2. B can dial Direct Call Pickup code + A’s extension number to pick up the ring call, and talk to C.
Intercom
Connect directly to a specified phone.
The call flow should be like below:
1. A dial Intercom code + B’s extension nubmer.
2. If Phone B supports page/intercom, it will answer the call automatically.
2) Call Park
It allows a person to park a call on IPPBX and continue the conversation from any other telephone set.
The call flow should be like below:
1. A and B are on the conversation.
2. A dial call park code (e.g. *6), PBX will tell A a park extension (e.g. 701) and then hang up the call. B is
parked on PBX.
3. C dial park extension: 701, PBX will bridge C and B.
3) Call Forward
Users can configure their follow me settings via their phones.
Reset to Defaults