10
911 12
1413 15 16
285mm
142.5mm
.00
.00 95.00mm 190.00mm 285.00mm 380.00mm
Technical Support
16
If you have problems with your Foscam device, please
contact the reseller you purchased from, or you can e-mail the
headquarter technical support team:
www.foscam.com
Your valuable comments and suggestions on improving
Foscam products are welcomed!
CE Certificate Webseite:
http://www.foscam.com/company/ce-certificate.html
10
Motion Dection
Motion detection is a feature which can take alarm response
actions and record the video for the motion occurred in the
surveillance scene.
Right click the mouse on the Live View screen, choose Menu >
Settings > Alarm > Motion Detection.
1. Select the channel from the Channel drop-down box.
2. Check the Enable checkbox to enable motion detection.
3. Check the checkbox to select the linkage method.
4. Click the Area Setting. Click and drag the mouse on the live
video image to draw a motion detection area.
5. Click the Settings. Check the Select checkbox, then click and drag
the mouse on the schedule to draw a motion detection schedule.
6. Select the sensitivity from the Sensitivity drop-down box.
7. Move the slider to set the Detection Interval.
8. Move the slider to set the Record Time of the motion detection.
9. Click the Save button to take eect.
1
3
4
5
6
7
8
9
2
11
Log In On Web
1. Copy the ”Equipment Search Tool” from the CD to your
computer. Open it, and it will display information of the NVR
and cameras in your LAN.
2. Double click the NVR in the list, and your default browser will
open up to the login page.
When log in the NVR for the rst time, you will need to install
the add-on, then the NVR will prompt you to change your
password.
When the IPC is FI9800W which is not provided in package, you
can follow the steps as below to add the IPC to the NVR.
1. Power on NVR and IPC, then connect the IPC to NVR with an
Ethernet cable, and wait for a minute, the Live View interface
will appear on monitor.
2. Disconnect the Ethernet cable between IPC and NVR, and wait
for a minute, the IPC will connect the NVR with WiFi automati-
cally.
3. On the login page, enter the User Name and Password of your
NVR, and select the Language. Then click the Login button.
You can access to the NVR via the browser in LAN.
14
Foscam NVR App
With the free APP, you can turn your iOS or Android smartphone
into a monitoring centre for your NVR security system.
You can scan the QR Code on the above, it will take you to
the download page to install the Foscam APP.
You can also simply go to the App Store o r G oogle Play and
search for the term "Foscam NVR". D o w nl o a d t h e A P P
to your smartphone.
Run the APP, and then register for a Foscam account. Once
logged in, you can tap the "+" button on the APP and
follow the setup wizard to add your NVR.
Access the NVR
Download the APP
iOS
Foscam NVR
Android
13
Upgrade Online
You can upgrade your NVR system or cameras by the web page.
During the upgrade, make sure that the NVR and cameras are
powered up.
Upgrading NVR
Check the NVR Upgrade, then click the Browse... button to
choose the upgrade le of the NVR. Click the Upgrade button to
upgrade the NVR.
On the web page of the NVR, click the icon , select System
Management > Upgrade to upgrade your NVR or camera.
12
Backup Online
Please Note
If you want to upgrade the camera in the kit. Please make
sure that the camera is connected to NVR through the cable,
so that the camera has always been powered on.
Upgrading IP Camera
Check the IP Camera Upgrade, then check the channel.
Click the Browse... button to choose the upgrade le of the
camera. Click the Upgrade button to upgrade the camera.
You can backup the recording les to the USB ash disk or PC.
Select the (Playback) > (Download) > select a recording
le, then click to download the recording video.
2016-08-11 10:15:36
FI9800W
2016-08-11 10:15:36
FI9800W
2016-08-11 10:15:36
FI9800W
2016-08-11 10:15:36
FI9800W
15
Wired Connection
FoscamNVR
