Foster S4000 NFO 4209 User guide

S4000
Island Hood 90 NFO 4209
Island Hood 120 NFO 4212

9 F11
INSTRUCTIONS
FOR INSTALLATION,
MAINTENANCE AND USE OF THE
S. 4000 ISLAND HOOD
GENERAL INFORMATION:
before installing and using the hood, read carefully
all instructions contained in the present handbook.
We suggest that you always keep the handbook

USE:

and vapours coming from the motor shall be con-

The extractor hood can be converted into a
“Filtering” hood by purchasing the Carbon Fil-
ter pack – carbon ilter cod. 9700400.
291
291
1198-898
595
810-1220
612
50
295
295
OUTLINE DIMENSIONS
En g l I s h

10 F11
FIXING INSTRUCTIONS FOR S.4000
ISLAND HOOD
OPERATION 1
1a         
pipe to the structure.
1b Let the top pipe slide downwards.
1c        

OPERATION 2
2a Check the necessary height from ceiling to

from the hob grids.
Z Z
VV
650-700
max 1270
mm
min 860
50
(fig. 1) (fig. 2)

11 F11
OPERATION 3
3a Reach the needed measure from bottom cable
of the hood to top part of the sliding structure
by pulling it upwards.
3b 
for each side (8 screws in total).
ATTENTION!
         

 
far from each other, use those nearest to the
required measure.
 
by granting the rigidness of the structure, is
indicated with an appropriate notice.
OPERATION 4
4a 
4b Use the appropriate jig to indicate the 4 drilling
centres.
4c Drill with 10 mm bit.
4d Insert the Fishers and screw the special threa-

supplied in the package.
(fig. 3) (fig. 4)
V
*
V
FISHER Ø 10
TORX
T

12 F11
OPERATION 5
5a Take the hood towards the ceiling, insert the top
        
washers and nuts Y (2 nuts per bar).
ATTENTION!
 -
ning due to vibrations.
OPERATION 6
6a Connect the fumes evacuation pipe and arran-
ge the electrical connection.
6b        
screws Z.
(fig. 6)(fig. 5)
Z
YY

13 F11
ELECTRICAL CONNECTIONS:
before carrying out any electrical connection, make
sure that the voltage corresponds to the one men-
tioned on the label located on the inside of the ap-
pliance. It is advisable to entrust the installation of

Appliance provided without plug: please con-
nect a plug or an omni-polar switch in compliance
-
ning connection distance not inferior to 3 mm, The
earth wire must not be interrupted by the switch.
Foster decline any responsibility for any in-
conveniences deriving from the non-obser-
vance of the aforesaid instructions of the use
of materials which are not in compliance with
the existing regulations.
CONTROL PANEL:
The control panel is electronic and is positioned in
the lower-end part of the hood.
FUNCTION OF BUTTONS:
SWITCHED OFF
1) TURN-ON 1st SPEED AND MOTOR TURN-
OFF
2) TURN-ON 2nd SPEED
3) TURN-ON 3rd SPEED
4) TURN-ON 4th SPEED
REMARKS:
- After 30 hours use of the hood, indicators of


 
The alarm can be reset by pressing for long
speed key n° 3 with engine switched off.
- The keys perimetric edge remains always
lighted. To deactivate it, press for long speed
key n° 1 with engine switched off.
 
To reactivate the lighting, press for long speed
key n° 1.
- It is possible to automatically delay the stalling
of the engine by pressing for long one of the
speed keys.
The engine will run for others 10 minutes.

14 F11
MAINTENANCE:
Please switch-off the electrical power, or discon-
nect the appliance before carrying out any mainte-
nance operation.
1) Cleaning of the stainless steel parts: in order
to avoid scratches in the steel surfaces, please
don’t use abrasive powders or brushes. Use li-

steel items.
2) Filter Cleaning:     
container and wash it in the dishwasher or with
soapy water, without rubbing it with a cloth or
a sponge.
        -
thout deforming it.
ATTENTION:
 
which are shared by other appliances powered
with energy different from the electrical one.
- Should the use of the hood be contempora-
neous to other appliances powered by energy
different from the electrical one, an adequate
ventilation on the room is to be foreseen.
          


that the oil doesn’t overheat during the frying

      -

recommended to follow the said instructions

15 F11
IMPORTANT:
The use of the hood in presence of other non-
electrical appliances (such as, but not limited to,
wood-burning stoves, gas stoves, non-electrical
      -

room.

the hood is not used for a long period of time.

    -
ging.
All recommendations on the subject should be
scrupulously observed in order to avoid unpleasant
inconveniences.
THE MANUFACTURER DECLINES ANY RE-
SPONSIBILITY CAUSED BY NON-COMPLIAN-
CE TO THE HERE ABOVE MENTIONED RE-
COMMENDATIONS.
240-1000
1
4
inox spazzolato Foster
ISLAND 90 ISLAND 120
2442.090 2442.120
898X595X50 mm 1198X595X50 mm
240-1000
n. 12 LED X 1 W n. 18 LED X 1 W
1
43
4
inox spazzolato Foster
362 W 368 W
Type
TECHNICAL FEATURES:
Code
Dimensions
Capacity
Cooking surface lighting
Anti-grease lters
Perimetric suction elements
Working speed
Operation
Finishing
Air outlet diameter
Voltage
Frequency
Max absorbed Power

F11 (09-09) 


