5
Clean the device exclusively as described in this instruction manual.
Ensure that cables and conductors are not damaged. Damage could be caused due to heat
impact, chemical influence or due to mechanical impacts such as rubbing, bending, tearing,
rolling over, or nibbling animals.
Prevent your device from falling.
In the case of falling, please have an electrician check the device before switching it on again.
If your device is damaged or if you notice a burning smell:
Disconnect the power supply immediately by unplugging the power cord. Never operate your
device with a damaged casing, defective reflector, defective lamps or a damaged power cord. Do
not open the device. Never repair the device on your own. Have the device repaired exclusively
by an electrician.
Please follow this instruction manual for maintaining your device.
Please only use spare parts which are conform to the required specifications.
See Technical specifications.
WARNING
Danger of fire by overheating
Accessories can overheat if they do not comply with the required specification.
The device itself, accessories, and easily inflammable materials in close distance can catch fire.
Please only use accessories and spare parts which are conform to the required specifications.
See Technical specifications.
Lamps, which are damaged or deformed by heat, must be exchanged immediately.
Remove easily inflammable materials, which are in close distance to the device.
CAUTION
Hazard of burning on hot device elements
The lamps could heat up up to 90°.
Do not touch device elements during use and during the cooling down phase.
Allow for device to cool down completely before beginning assembly or maintenance measures.
WARNING
Danger of cutting and splitting due to breaking or bursting lamps, possible discoloration due to burn
marks on the lamps
Lamps can break and split when they fall.
Even small residues of skin oil on the lamps can lead to the splitting of the lamp, due to the high
heat impact. Broken glass can injure eyes and skin.
Treat the lamps carefully to keep them from breaking.
Do not touch the lamps with bare hands. Only touch the lamp at the plastic socket or with a
clean cloth or with clean gloves.
Avoid touching the light tube accidentally when mounting or changing accessories.
Only use lamps that comply with EN 60357 Page 3155.
3. Unpack and check the device
Please unpack the device carefully.
Please check if the scope of delivery is complete:
1 x Beauty Ring Light 90W
o3 x lamps
o1 x camera mount
o1 x lamp socket with panhead
