Foundations SERENITY COMPACT STATIONARYSIDE CRIB User manual

heet 1 of 5
WARNING
• Read all instructions BEFORE assembly and SE of crib.
• npack carton and identify all parts. In some cases, an extra fastener has been included.
• Ask your dealer or call
Foundations™ at 1-866-740-0195 (Monday through Friday, 9:00 a.m.–
4:00 p.m. Eastern Time) for assistance, replacement parts, or instructions if needed. Please
have ready the crib model number and manufacture date from the label on the bottom
rail of Headboard.
Part Description / Descripción de piezas Qty. / Cantidad
A. tationary ide / Lado estacionario 2
B. End panel / Panel del Extremo 2
C. Mattress support / oporte del colchón 1
D. Mattress / Colchón 1
E. M6 x 25mm Connector bolt / Perno de conexión M6 x 25 mm 4
F. M6 Connector nut / Tuerca de conexión M6 4
G. M6 x 60 mm machine screw / Tornillo para metales M6 x 60 mm 8
H. M6 Barrel nut / Tuerca cilíndrica M6 8
J. Locking casters / Ruedas de inmovilización 2
K. Nonlocking casters / Ruedas libres 2
L. Hex Wrench / Llave hexagonal 2
PARTS LIST / LISTA DE PIEZAS
D. Mattress
Colchón
C.
J.
J.
G.
F.
F.
H.
E.
E.
H.
H.
F.
G.
Hex Wrench (2)
Llave hexagonal (2)
L
M6 x 60mm Machine Screw and
M6 Barrel Nut (8)
Tornillo para metales M6 x 60 mm y
Tuerca cilíndrica M6 (4)
H
G
K.
G. G.
G.
G.
G.
M6 x 25mm Connector Bolt and
M6 Connector Nut (4)
Perno de conexión y
Tuerca de conexión (4)
EF
B. End Panel
Panel del Extremo
B. End Panel
Panel del Extremo
A. Stationary Side
Lado estacionario
A. Stationary Side
Lado estacionario
OME ADULT A EMBLY NECE ARY
TOOL REQUIRED: HEX WRENCH (INCLUDED) AND
PHILLIP CREWDRIVER (NOT INCLUDED)
E REQUIERE EN AMBLAJE PARCIAL POR UN ADULTO
HERRAMIENTA NECE ARIA : LLAVE HEXAGONAL (INCLUIDA) Y
DE TORNILLADOR PHILLIP (DE CRUZ) (no incluido)
•Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing
parts or sharp edges. DO NOT use crib if any parts are missing or broken. DO NOT substitute
parts.
• Choking hazard - Crib assembly hardware includes small parts. Keep small parts away from
children.
ASSEMBLY INSTRUCTIONS
SERENITY™COMPACT STATIONARY SIDE CRIB

Sheet 2 f 5
IMPORTANT SAFETY NOTICE: When assembling the crib, labels n the End Panels
M ST face t ward the inside f the crib. If crib is assembled inc rrectly, it c uld create an
entrapment hazard between the mattress and end panels.
1. Rem ve Barrel Nut (H) fr m M6 x 60mm Machine Screw (G).
2. Insert plain end f Barrel Nut (H) int the h le l cated at ne end f Stationary Side
T p Rail.
3. Standing utside crib, p siti n the Stationary Side (A) with the barrel nut h les t the
inside f crib and plastic teething pr tect r at t p.
4. Insert ne M6 x 60mm Machine Screw (G) thr ugh h le near t p f End Panel, int the
h le in the end f the Stationary Side and int the barrel nut. (If necessary, turn the
barrel nut t align the barrel nut with the screw by using a screwdriver in the end sl ts f
the barrel nut.) Turn the machine screw int the barrel nut.
5. Repeat at pp site end f Stationary Side t secure t ther End Panel.
6. Repeat steps 1. thr ugh 5. ab ve t attach the b tt m rail f the Stationary Side t the
End Panels (B).
7. Repeat steps 1. thr ugh 6. ab ve f r the sec nd Stationary Side.
8. Securely tighten all screws n Stationary Side using Hex Wrench (L).
G.
H.
F.
E.
C.
Hook Bracket
Soporte de
gancho
1. Determine which mattress height will be used in the crib.
Note: If child is able t pull t standing p siti n, set mattress t l west p siti n.
2While standing at the stati nary side rail, place the h k bracket n the pp site side f
Mattress Support (C) ver l wer rails f Stati nary Side.
Note:
H k brackets and instructi n label n Mattress Supp rt M ST be t ward
pp site side as sh wn.
3. Swing Mattress Support d wn until h k brackets c ntact the l wer tracks f r the
pp site stati nary side.
4.
Standing n ne side, lift Mattress Support vertically t desired height p siti n, insert
Connector Bolt (E) in End Panel, and secure with Connector Nut (F).
5. W alk ar und the crib t the pp site side and repeat step 4 .
6. Securely tighten all Connector Bolts and Connector Nuts .
Note: When using crib with evacuati n frame, mattress supp rt must be in l west
p siti n.
STEP 1 - STATIONARY SIDE ASSEMBLY
STEP 2 - MATTRESS S PPORT
STEP 1
•
PASO 1
STEP 2
•
PASO 2

Sheet 3 of 5
Note: Locking Casters (J) sho ld be positioned on the same side of the crib.
1. Standing at the side, lift crib and insert a Locking Caster (J) into a caster hole on bottom
of En Panel . While holding the Caster in place, set it on the floor and p sh down on the leg
ntil the caster snaps into position.
2. Repeat step 1. at opposite end of same Stationary Side.
3. Repeat step 1. and 2. on the opposite side of crib sing the
Nonlocking Casters (K).
Note: When sing crib with evac ation frame, do not install crib casters.
1. To remove protective film, firmly grasp one corner of the protective film covering the acrylic
panel in the End Panel and p ll slowly ntil film is completely removed. Repeat for the
opposite End Panel.
2. Clean clear panel with spray cleaner like “Windex®” to remove gl e left on s rface of panel.
J.
K.
STEP 3 - CASTER ASSEMBLY
STEP 4 - PROTECTIVE FILM REMOVAL
STEP 3
•
PASO 3
STEP 4
•
PASO 4
1. Insert Mattress (D) .
This completes the assembly. Crib is ready for use.
STEP 5 - MATTRESS
Caster
Hole
Orificio
para la
rueda

Sheet 4 of 5
•The crib, including side rails, must be fully erected prior
to use.
•Always provide the supervision necessary for the
continued safety of your child. When used for play,
NEVER leave child unattended.
• trings can cause strangulation! DO NOT place items
with a string around a child’s neck such as hood strings
or pacifier cords. DO NOT suspend strings over crib or
attach strings to toys.
•To reduce the risk of ID , pediatricians recommend
healthy infants be placed on their back to sleep unless
otherwise advised by your physician.
•DO NOT place crib near window where cords from blinds
or drapes can strangle a child.
•DO NOT use crib near objects that child could reach or
pull into crib and cause injury such as lamps, heaters,
fireplaces, or ironing boards.
•
When child is able to pull to standing position, set
mattress to lowest adjustment position and remove
bumper pads, large toys, and other objects that could
serve as steps for climbing out.
•Discontinue use of the crib when child is able to climb
out or reaches the height of 35 inches (89 cm). The child
should be placed in a youth or regular bed.
•Replace teething rail if damaged, cracked or loose.
•If refinishing, use a non-toxic finish specified for
children’s products.
•DO NOT use a water mattress with this crib.
•To avoid injuries, do not allow children to climb or play
on or under the crib.
WARNING
Failure to follow these warnings and the
instructions could result in serious injury
or death!
WARNING
Infants can suffocate
- In gaps between a mattress too small or too thick and
side of crib.
- On soft bedding.
NEVER add a mattress, pillow, comforter or padding.
- Use ONLY the mattress provided by the manufacturer
(which must be at least 37-1/2 inches long by 23-1/2
inches wide and not more than 3-1/4 inches thick).
- Never use plastic shipping bags or other plastic
film as mattress covers not sold and intended for
that purpose. They can cause suffocation.
WARNING:
ANY MATTRE U ED IN THI CRIB MU T BE AT
LEA T 37-1/2 INCHE LONG BY 23-1/2 INCHE
WIDE WITH A THICKNE NOT EXCEEDING 3-1/4
INCHE .

Sheet 5 of 5
© 2003 Shamrock Industries, Inc.
• This crib is guaranteed to meet all federal and state standards and will
provide many years of service provided you adhere to the following
guidelines for assembly, maintenance and operation.
• Never aim or point a vaporizer or humidifier directly at the crib. The
water vapor will ruin the finish of the crib, as it would any other fine
piece of furniture.
• For parts or assistance, call Foundations™ .
Adjusting Matt ess Suppo t:
1. Remove all Connector Bolts and Connector Nuts holding the Mattress
Support allowing Matress Support to rest on Stationary Side Bottom
Rails .
2. Standing on one side, lift Mattress Support vertically to desired height
position, insert Connector Bolts in End Panels, and secure with
Connector Nuts.
3.W alk around the crib to the opposite side and repeat step 2 .
4 .Securely tighten all Connector Bolts and Connector Nuts .
Disassembly and Sto age:
1. Remove the crib mattress.
2. Follow the assembly instructions in reverse order, starting with Step 2.
3. Store your crib in a cool, dry place.
OPERATION AND STORAGE
CAUTION: Periodically check the safety of your crib by making certain all
screws, nuts, and bolts are tightened securely. Call
Foundations™ to replace any broken or missing parts. DO NOT
substitute parts.
• our crib may be cleaned using a damp cloth with mild soap or a soft
dry cloth.
• Avoid using furniture polish or cleaning agents that may be hazardous
to children.
• To clean Clear or Mirror Panels, use mild dish soap, water, and a soft
cloth. Wipe the surface, applying only light pressure to remove grease
or oil. Do not use window-cleaning sprays, kitchen scouring
compounds or other chemicals.
• To remove fine scratches from Clear or Mirror Panels, hand polish with
a plastic scratch remover or compound cleaner.
• Replace teething rail if damaged, cracked or loose.
• If refinishing, use only non-toxic finish specified for children’s products.
MAINTENANCE AND CLEANING
Foundations™warrants this product to be free from all defects in material and
workmanship when used according to the manufacturer’s instructions to the
original owner for a period of one year from date of purchase. The warranty
does not apply to damage caused by product alteration, normal wear and
tear, misuse or abuse of the product. Keep you sales receipt as a record of
the date of purchase. For replacement parts or warranty issues, please
contact Foundations™as we are better able to serve you. DO NOT return the
product to your retailer or distributor.
If you need assistance, call or write:
Foundations™ , P.O. Box 1910, Medina, OH 44258-1910
Telephone [phone], Fax [phone]
ONE YEAR LIMITED WARRANTY
SI010C
Division of Shamrock Industries, Inc.
P.O. Box 1910
Medina, OH 44258-1910
1-866-740-0195